[tphaeng]

Pm also please

[pweber]

PM sent.

[split71]

Originally Posted by ******

PM sent.

PM when you can...thanks.

[Jason10481]

Me too please!

[*LongFella]

PM when you can. Thanks!

[Turkish Mafia]

Originally Posted by ******

PM sent.

I would greatly appreciate a PM as well. Thanks very much.

[r3t1cal]

I would love to know too, could you PM me the info. Thanks

[cbeers]

Would enjoy having this information too. PM when you get a chance, thanks.

[SRT335]

PM please

[pweber]

Sent to all.

[Nonecure]

What is the current daten file? I'm currently downloading E89_v49.7z. I was told I needed the full daten to do the Alpina flash. Is this true and is this file what I need?

[acidbbg]

Originally Posted by Nonecure

What is the current daten file? I'm currently downloading E89_v49.7z. I was told I needed the full daten to do the Alpina flash. Is this true and is this file what I need?

You are correct.
It's more of a folder with all the settings possible for the E89/E9X chassis.
*Which includes the settings for Alpina setup/flash for the automatic tranny 335i.

Should be ~3 gig in zip form but when extracted, it should be ~10 gig.

Make sure you follow the guides to properly updated NCS/WinKFP.
Or you can just use the BMW Coding Tool.
*Just search as there are many threads with links.

[Nonecure]

http://www.e90post.com/forums/attach...1&d=1374411715

I got the latest datem and copied to the 3 folders like in the directions, but I still don't see anything in the WinKFP. Did I miss a step? I am running Windows 7 x64, so things were slightly different during install.

[acidbbg]

I don't think you imported them correctly.

I personally used BMW Coding Tool to update NCS & Winkfp.
It's much easier than manually copying them.

Check out this video link:
http://www.e90post.com/forums/showthread.php?t=859474

[Nonecure]

I figured it out, I had to load datem files into WinFEP using the setup tool. I must have missed that during initial setup. I flashed the Alpina and it works expect now I lost my paddle shifters. I flashed 7615835 just like in the DYI video.

[Nonecure]

Originally Posted by acidbbg

I don't think you imported them correctly.

I personally used BMW Coding Tool to update NCS & Winkfp.
It's much easier than manually copying them.

Check out this video link:
http://www.e90post.com/forums/showthread.php?t=859474

Thanks for the reply. I followed that video, but it only showed updating the datam files and not writing them to the WinKFP.

[acidbbg]

Originally Posted by Nonecure

Thanks for the reply. I followed that video, but it only showed updating the datam files and not writing them to the WinKFP.

look further down the thread of the link I posted above.
There is a Video showing how to do the Alpina Flash.

Originally Posted by Nonecure

I figured it out, I had to load datem files into WinFEP using the setup tool. I must have missed that during initial setup. I flashed the Alpina and it works expect now I lost my paddle shifters. I flashed 7615835 just like in the DYI video.

About the paddle shifters, you will need to use NCS Expert to code them back on.

Credit to Cn555ic

************************************************** ****************************************
Here is what you do:

0-Start ignition with cluster lights on
1-Load NCSexpert
2-File Use EXPERTMODE click ok
3-(F1) Vin/ZCS/FA
4-(F3) SG ausw
5-Choose E89 chassis click ok
6-Choose CAS click ok
7-(F6) Back
8-(F4) Read ECU and pick EGS module click ok
9-wait till nettodat file pops up and then close it out
10-Press F3 (execute JOB)
11-After it says coding ended your done!
12-Close out NCSexpert

At this point 3 things can happen:

**A)There are no errors and the car starts fine and the paddle shifters are working and your happy!

**B)The car starts but then when you drive off, the shifting of gears are all screwy and changing correctly.

**C)The car starts but you get the dreaded GEAR error and it wont even go into drive at all..

If you have either B or C then you issue is the update of the Spdaten 48.1 was incorrectly done...Go back and check installation and start again

[pweber]

Originally Posted by Nonecure

What is the current daten file? I'm currently downloading E89_v49.7z. I was told I needed the full daten to do the Alpina flash. Is this true and is this file what I need?

You don't need to download Full sp-daten. It is enough to download lite + GK215. I will PM you with daten to alpina flash.

[Kahmati]

Hello I would be grateful for the information you are sending members. total noob, but I have a feeling I will find a way. looking forward engaging the convertible with the key.

Thanks

[pweber]

PM sent

[bestb]

PM please

[pweber]

PM sent.