[M2siast]

Originally Posted by kuzdu

crap i didn't notice i posted in the M2 forum, sorry guys.

Absolutely nothing to be sorry about.
We just won’t be able to be as helpful as the more knowledgeable folks in the G42 forums. Our dash is a bit “restricted” to 2 options and we didn’t get new fonts or fascia in any update.

[kuzdu]

Originally Posted by M2siast

Absolutely nothing to be sorry about.
We just won’t be able to be as helpful as the more knowledgeable folks in the G42 forums. Our dash is a bit “restricted” to 2 options and we didn’t get new fonts or fascia in any update.

yup they should allow some more configs, hopefully bimmercode unlocks this soon.

[tsn]

Anyone installed 03/2024.40? Notised any changes?

It wiped away the ambient light coding, but the B&W soundprofile was still there.

[M2siast]

Originally Posted by tsn

Anyone installed 03/2024.40? Notised any changes?

It wiped away the ambient light coding, but the B&W soundprofile was still there.

Do you have an M2?

AFAIK the latest update is 03/2024.35, not .40.

I’ve had it for a month and observed no changes other than what I mentioned before (the connected App Store)

[DomMuc]

installed 03/2024.40 2 weeks ago..no changes noticed

@m2siast maybe not availiable in us/can

[maxwell smart]

Installed 03/2024.40 this morning.

[Eatonian49]

After the recent 03/2024.40 update my M2 won't remember the auto start stop being turned off whenever I come out of M1/M2 mode. I can disable it via the console button, exit the car, get back in and it be off. However, if I'm driving and I go to M1/M2 mode then turn either off the auto start stop turns back on. Both M1/M2 mode have auto start stop off in the settings.

I swear it didn't do that before and pressing it once kept it off.

Oddly enough some of my M1/M2 settings were also changed...haven't seen that happen before with an update.

[mellowjello]

Originally Posted by Eatonian49

After the recent 03/2024.40 update my M2 won't remember the auto start stop being turned off whenever I come out of M1/M2 mode. I can disable it via the console button, exit the car, get back in and it be off. However, if I'm driving and I go to M1/M2 mode then turn either off the auto start stop turns back on. Both M1/M2 mode have auto start stop off in the settings.

I swear it didn't do that before and pressing it once kept it off.

Oddly enough some of my M1/M2 settings were also changed...haven't seen that happen before with an update.

Same observation here

[J-RO]

Not a fan of some of the latest updates. They seem to do more harm than good.

[izzyM2]

Can we just pick not to install?

[akumachu]

Originally Posted by mellowjello

Same observation here

I noticed the same thing after my update two days ago but once I stopped the car with auto-stop-start off, then the setting sticked.
It did not stick when I was driving so their code was only saving the setting upon car shutdown.
And toggling between M1/M2 and normal would take on the "Saved" value.

[Derko1]

Originally Posted by akumachu

I noticed the same thing after my update two days ago but once I stopped the car with auto-stop-start off, then the setting sticked.
It did not stick when I was driving so their code was only saving the setting upon car shutdown.
And toggling between M1/M2 and normal would take on the "Saved" value.

Can those of you who don't have it stick , try saving your seating profile to either number on the door with it off and the other with it on. See if that does anything. Some times weird things are stuck to a certain profile. 🤷🏻

Mine is doing the update now. Will see what's going on tomorrow morning.

[Carefree]

Installed update.
No changes.

Edit- the auto off function needed a reset.

[Eatonian49]

Originally Posted by Derko1

Can those of you who don't have it stick , try saving your seating profile to either number on the door with it off and the other with it on. See if that does anything. Some times weird things are stuck to a certain profile. 🤷🏻

Mine is doing the update now. Will see what's going on tomorrow morning.

Ah I didn't think of trying that. I will do it today and report back.

[DarkNight707]

Originally Posted by M2siast

Do you have an M2?

AFAIK the latest update is 03/2024.35, not .40.

I’ve had it for a month and observed no changes other than what I mentioned before (the connected App Store)

I have a g87 and the latest update got a few days ago also shows the .40.

[Derko1]

Has anyone gone back into BimmerCode to code their things back in yet? I am missing access to the advance crash module and the BDC. They are greyed out and say that no coding is available.

[M2siast]

Originally Posted by Derko1

Has anyone gone back into BimmerCode to code their things back in yet? I am missing access to the advance crash module and the BDC. They are greyed out and say that no coding is available.

Which version?

[Derko1]

Originally Posted by M2siast

Which version?

03/2024.40

[M2siast]

Originally Posted by Derko1

03/2024.40

That’s interesting. I’ll try to keep mine on .35.

It seems like the new update is just meant to make us lose more and more control.

[Derko1]

Originally Posted by M2siast

That’s interesting. I’ll try to keep mine on .35.

It seems like the new update is just meant to make us lose more and more control.

All of my changes on the other modules that I do have access to, stayed. The ones in those two modules were reset.

I also had my M modes settings changed. Both M1 and M2 had different settings changed to them.

[J-RO]

Slowly but surely BMW is making it difficult, and maybe one day, impossible to code their vehicles. If this continues the boys at Bimmercode may be out of business.