jb4 codes...any idea?

MasterWang · 07-30-2012, 03:46 PM

Just installed my jb4 and got allllll these codes

Anyone know if any of these codes are something I need to worry about?
I only have an Injen DCI and this JB4.

2c7f
2c2c
2abc
29e2
2d58
0000
0000
cd99
2ee0
cda8
2cfe
00f1
2304

WilliamS · 07-30-2012, 03:53 PM

i would say you have something connected very wrong! Double check your wiring, make sure you plugged everything in properly.

MasterWang · 07-30-2012, 03:56 PM

Quote:

Originally Posted by Goofyguy

i would say you have something connected very wrong! Double check your wiring, make sure you plugged everything in properly.

Although I'm getting all those codes, my jb4 is working perfectly fine. If something wasn't connected, wouldn't it not work at all?

Mauryk · 07-30-2012, 04:42 PM

Here is a list of (most) codes.

http://www.scribd.com/doc/82553011/Bmw-Code-Sheet

E90Company · 07-30-2012, 05:27 PM

2c7f-Lambda probe behind catalytic converter 2, trimm control
2c2c-lambda probe in front of catalyic converter 2, system check
2abc-Charging pressure sensor, electrical
29e2-Fuel injection rail, pressure sensor signal
2d58-DME digital motor electronics, internal failure: control nominal torque
0000
0000
cd99-torque requirement EGSelectronic gear control
2ee0-Coolant temperature sensor, signal
cda8-Status KOMBI, 1B4
2cfe-Throttle valve, continuous adaptation
00f1
2304

These are the ones I found... I am no expert but I would say check your connections.

supahdave · 07-30-2012, 06:20 PM

did these popup after install? Sounds like DME wasnt asleep or batt disconnected during install.

Clear them and see if they come back.

MasterWang · 07-30-2012, 09:28 PM

Wow thanks for all the help. I cleared the codes and now I only get a 2f6c, which I think is a code from my golf tee mod?

07-30-2012, 03:46 PM	#1
MasterWang Captain 137 Rep 926 Posts Drives: F06 M6 Join Date: Jan 2011 Location: Overland Park, KS iTrader: (2)	jb4 codes...any idea? Just installed my jb4 and got allllll these codes Anyone know if any of these codes are something I need to worry about? I only have an Injen DCI and this JB4. 2c7f 2c2c 2abc 29e2 2d58 0000 0000 cd99 2ee0 cda8 2cfe 00f1 2304
	Appreciate 0 Tweet Quote

07-30-2012, 03:53 PM	#2
WilliamS GoofBall 54 Rep 1,055 Posts Drives: 2008 E92 N54 Xdrive Join Date: Jun 2012 Location: Tampa, FL iTrader: (2)	i would say you have something connected very wrong! Double check your wiring, make sure you plugged everything in properly.
	Appreciate 0 Quote

07-30-2012, 04:42 PM	#4
Mauryk Private 4 Rep 99 Posts Drives: 2010 335i Xdrive Join Date: May 2011 Location: Great Falls, VA iTrader: (1) Garage List 2010 bmw 335i xdrive [0.00]	Here is a list of (most) codes. http://www.scribd.com/doc/82553011/Bmw-Code-Sheet __________________ 2010 E90 335i Xdrive\| Titanium Silver Metallic \| Black Leather \| Premium, Sport, Nav, Cold \| Steptronic \| matte black grilles \| Cyba scoops \| pinstripes \| Rear Fog Mod \| Clear Reflectors \| WeissLicht AE \|More to come...\|
	Appreciate 0 Quote

07-30-2012, 05:27 PM	#5
E90Company Major General 198 Rep 6,136 Posts Drives: Car Join Date: Mar 2012 Location: FL iTrader: (2)	2c7f-Lambda probe behind catalytic converter 2, trimm control 2c2c-lambda probe in front of catalyic converter 2, system check 2abc-Charging pressure sensor, electrical 29e2-Fuel injection rail, pressure sensor signal 2d58-DME digital motor electronics, internal failure: control nominal torque 0000 0000 cd99-torque requirement EGSelectronic gear control 2ee0-Coolant temperature sensor, signal cda8-Status KOMBI, 1B4 2cfe-Throttle valve, continuous adaptation 00f1 2304 These are the ones I found... I am no expert but I would say check your connections.
	Appreciate 0 Quote

07-30-2012, 06:20 PM	#6
supahdave Lieutenant 25 Rep 563 Posts Drives: 09 AW 335i Sedan Join Date: Feb 2009 Location: San Diego, CA iTrader: (4)	did these popup after install? Sounds like DME wasnt asleep or batt disconnected during install. Clear them and see if they come back.
	Appreciate 0 Quote

07-30-2012, 09:28 PM	#7
MasterWang Captain 137 Rep 926 Posts Drives: F06 M6 Join Date: Jan 2011 Location: Overland Park, KS iTrader: (2)	Wow thanks for all the help. I cleared the codes and now I only get a 2f6c, which I think is a code from my golf tee mod?
	Appreciate 0 Quote