[awg87]

Originally Posted by Ronin76

Can you tell me what the specs are for the 1000M wheels (offset and such).

I believe the standard wheels are Fronts are 9.5J x 19” ET20mm and the Rears are 10.5J x 20” ET20mm.

Are the 1000M the same width and offsets?

Same but 9.5J x 20" ET20 and 10.5J x 21" ET20 tires are 285/295 instead of 275/285

[Ronin76]

Originally Posted by awg87

Same but 9.5J x 20" ET20 and 10.5J x 21" ET20 tires are 285/295 instead of 275/285

Since they are the same width and offset, could the same spacers (if one choses to use spacers) work for the 1000M? I was hoping to lower the car with the M HAAS kit and many are putting 15mm front and 18mm rears and the results look amazing!

[awg87]

Originally Posted by Ronin76

Since they are the same width and offset, could the same spacers (if one choses to use spacers) work for the 1000M? I was hoping to lower the car with the M HAAS kit and many are putting 15mm front and 18mm rears and the results look amazing!

I can't speak on that since I don't plan on lowering mine but I think others on the forum have done so. Sorry!

[M2siast]

Originally Posted by awg87

They're honestly just so good looking. Funnily enough the ride might've gotten better despite the 20/21s since the tires are slightly fatter and you have slightly more sidewall too (still plug and play despite slightly bigger dimensions across the board)

Hang on, what?

What do you mean by tires being fatter with more sidewall? Compared to what?

[awg87]

Originally Posted by M2siast

Hang on, what?

What do you mean by tires being fatter with more sidewall? Compared to what?

Stock wheels have 275/285mm tires, the 20/21s use 285/295

[M2siast]

Originally Posted by awg87

Stock wheels have 275/285mm tires, the 20/21s use 285/295

Well, sure. But their sidewall profile is lower, therefore, they have less sidewall than stock.

[Skooba1231]

Not a huge difference but the ride is definitely not better on the 20/21.

[awg87]

Originally Posted by Skooba1231

Not a huge difference but the ride is definitely not better on the 20/21.

i can confirm. i was wrong after driving only short distance suburb streets. after driving long distance they are about the same or a bit worse. definitely worse on some la city streets.

not too terrible though

also at first glance side wall looked larger because they were VERY overfilled. they came pre-pumped at 44 psi mbmb

[Ronin76]

Originally Posted by Click_ID

Signature wheels? Look nice!

[Ronin76]

For those who bought these wheels, if you were to do it all over again, would you buy these wheels again or would you pick something smaller (OEM sizes)? I love these wheels but curious of ride comfort. Def not looking for a Lexus floaty ride but don't want something extremely harsh.

[M_Power Rob]

Originally Posted by Ronin76

For those who bought these wheels, if you were to do it all over again, would you buy these wheels again or would you pick something smaller (OEM sizes)? I love these wheels but curious of ride comfort. Def not looking for a Lexus floaty ride but don't want something extremely harsh.

Speaking to size only, my rears are 11x20 and fronts are 9.5x20...rides great.

[KJ10]

Just stumbled across this thread and figured I would recommend who I got mine from as they have worked out great and were a great deal. His name is John and he does a lot of wheels for guys on the Alfa forums as well. Custom forged replicas similar to what has previously been mentioned in this thread. Can do any pretty much any size, offset, color. I will PM his info to anyone that wants it as I am not sure he wants it spread across the forums.

[ttaidapos]

Originally Posted by KJ10

Just stumbled across this thread and figured I would recommend who I got mine from as they have worked out great and were a great deal. His name is John and he does a lot of wheels for guys on the Alfa forums as well. Custom forged replicas similar to what has previously been mentioned in this thread. Can do any pretty much any size, offset, color. I will PM his info to anyone that wants it as I am not sure he wants it spread across the forums.

Yup, John does a lot in the Alfa forums. Very familiar with him. I opted this time around going to a supplier directly (China). My forged 1000M in bronze gold copies are on order but in OEM stock wheel sizes 19/20. Expecting shipment in early March if all goes well. I've made a thread just for this. I'll post impressions when I get them.

[KJ10]

Originally Posted by ttaidapos

Yup, John does a lot in the Alfa forums. Very familiar with him. I opted this time around going to a supplier directly (China). My forged 1000M in bronze gold copies are on order but in OEM stock wheel sizes 19/20. Expecting shipment in early March if all goes well. I've made a thread just for this. I'll post impressions when I get them.

Nice! I'll be sure to check it out when they arrive and read your thoughts.

[marconi118]

Originally Posted by SebG87

Sure, here you go

Bellissima, i cerchi da 21 sono riportati a libretto o su certificato di conformità?
bisogna iscriverli dopo?
Nessuin problema con le forze del ordine?

[Ronin76]

Originally Posted by KJ10

Just stumbled across this thread and figured I would recommend who I got mine from as they have worked out great and were a great deal. His name is John and he does a lot of wheels for guys on the Alfa forums as well. Custom forged replicas similar to what has previously been mentioned in this thread. Can do any pretty much any size, offset, color. I will PM his info to anyone that wants it as I am not sure he wants it spread across the forums.

Yeah, I just found his site and spoke to him a bit. Good guy and has a really nice selection of wheels. I am def going to consider getting a set from him.

[SebG87]

Originally Posted by marconi118

Bellissima, i cerchi da 21 sono riportati a libretto o su certificato di conformità?
bisogna iscriverli dopo?
Nessuin problema con le forze del ordine?

Ciao! La misura é già riportata a libretto

[marconi118]

benissimo se è già sul certificato di conformità!

se per caso smonti un cerchio potresti guardare dentro chi produce questi cerchi?

if someone could have a look at the manufacturer of the 1000m wheels?