No gong sound

Cardoso.m3 · 11-16-2024, 08:51 PM

I bought a 2007 bmw 320i Joy, it came without the original radio installed, in place was a pionner, however today I put a logic7 professional in it, I made a fiber looping to work, but I remembered the gongs that were supposed to have, in the radio settings when I increase the car makes the gong, but only on this occasion, otherwise zero warning gongs. Does anyone know how to solve it? Or is it just coding?

Cal122 · 11-17-2024, 02:41 PM

At some point in 2007 (I believe it was), they changed over to the modern gong noise that comes through the radio and speakers. Prior to that on the E90, it made more of a beeping noise which came from a speaker that's mounted underneath the dash on the drivers side.

Could be the prior owner either coded out the gong, disconnected the speaker or other coding changes.

It's been a while since I upgraded to the newer radio, but for coding you have to change GONGS to aktiv in the RAD2 module. And also believe in the KOMBI module, HU_VERBAUT_C08 should be set to radiostufe_3_4

11-16-2024, 08:51 PM	#1
Cardoso.m3 Registered 0 Rep 3 Posts Drives: Bmw 320i e90 2007 Join Date: Nov 2024 Location: São paulo iTrader: (0)	No gong sound I bought a 2007 bmw 320i Joy, it came without the original radio installed, in place was a pionner, however today I put a logic7 professional in it, I made a fiber looping to work, but I remembered the gongs that were supposed to have, in the radio settings when I increase the car makes the gong, but only on this occasion, otherwise zero warning gongs. Does anyone know how to solve it? Or is it just coding?
	Appreciate 0 Tweet Quote

11-17-2024, 02:41 PM	#2
Cal122 Second Lieutenant 367 Rep 232 Posts Drives: 2006 325i 2011 328i xDrive Join Date: Jul 2022 Location: Northeast iTrader: (0)	At some point in 2007 (I believe it was), they changed over to the modern gong noise that comes through the radio and speakers. Prior to that on the E90, it made more of a beeping noise which came from a speaker that's mounted underneath the dash on the drivers side. Could be the prior owner either coded out the gong, disconnected the speaker or other coding changes. It's been a while since I upgraded to the newer radio, but for coding you have to change GONGS to aktiv in the RAD2 module. And also believe in the KOMBI module, HU_VERBAUT_C08 should be set to radiostufe_3_4
	Appreciate 0 Quote