[JABCAT]

I got the message for an update yesterday and it started downloading to my phone. I hit cancel. I oddly got a roof not initialized error yesterday when I hit the button to close the shade.

I have several things coded with bimmercode that I don't feel like re-coding right now.

[Trogster]

My update has been stuck at 6% for some time now.

[fangelov]

Originally Posted by Trogster

My update has been stuck at 6% for some time now.

Mine was stuck at 6% for over 24 hours. I downloaded the update to my phone and when I connected the phone to the car via BT and WiFi, it transferred the update and completed it. Still took a while to get it done, and even longer to code stuff back with BimmerCode. Wish there was an option to create a macro in BimmerCode and restore all changes at once.

[baron95]

I think BMW may have pulled this update.

I got a notification yesterday that an update was available, but today, when I click on it, it says no updates available. And I’m still in the old 07/2023 SW.

Someone is saying in FB that they lost TPMS after the update. Wonder if there are issues and tgey pulled the update.

[Trogster]

Originally Posted by fangelov

Mine was stuck at 6% for over 24 hours. I downloaded the update to my phone and when I connected the phone to the car via BT and WiFi, it transferred the update and completed it. Still took a while to get it done, and even longer to code stuff back with BimmerCode. Wish there was an option to create a macro in BimmerCode and restore all changes at once.

Same here.

Reset the update by disabling Auto Updates in the M2's data privacy menu. Then I loaded the update on my phone, linked to the M2, and re-enabled Auto Updates.

Then took only 30-minutes of driving to fully load the new file.

Was instructed to park the car for 20-minutes, only to return to a "Failed to Install" message.

Tried the install again with eventual success.

Still have no idea what, if any new features were added?

[M2siast]

Originally Posted by baron95

I think BMW may have pulled this update.

I got a notification yesterday that an update was available, but today, when I click on it, it says no updates available. And I’m still in the old 07/2023 SW.

Someone is saying in FB that they lost TPMS after the update. Wonder if there are issues and tgey pulled the update.

Don’t think so.
Installed mine today over lunch and all is well.

[Chicanery]

My Spotify has ceased loading up any music since I updated on Friday. Perhaps it's coincidental.

[izzyM2]

I just completed mine and did it via app as it says it’s faster. But it took about 45 min of driving and 20 min of standby to finally complete. Did not really see any obvious difference. I did lose my BimmerCode settings but just recoded them.

[myaghi]

I also received the update and was succesful. I don't know what is new, could not find anything but I noticed that only part of my bimmercode was erased, some are still functioning (5x blinker, start-stop memory still working)

[fangelov]

My 5x blinker definitely reset back to 3 only. The seat heating temperatures reset as well. The side mirror tilting angle in reverse went back to 90 percent. So it looks like many things got overridden. Will see if something does not work right the next time I drive the car.

[izzyM2]

I notice the same on the 5x blinker still available but when I plugged BimmerCode it said 3x. I wonder if that is now default. I noticed the BimmerCode erased when the usb drive could no longer read movies.

[baron95]

Originally Posted by M2siast

Don’t think so.
Installed mine today over lunch and all is well.

I was able to install it last night. All is well. Seems slightly snappier.

I too was stuck at 6% for hours. Until I found the problem.

On your iPhone, go to settings, MyBMW and make sure Local Network is ON (green). Once you do that it breezed by the install. 5 min to prep. Turn car off with parking brake on. Click install. 15 min to install.

P.S. I did. Not have to drive. Simply set on my driveway with the car on to transfer/prep. Car off to install.

[M2siast]

Originally Posted by fangelov

My 5x blinker definitely reset back to 3 only. The seat heating temperatures reset as well. The side mirror tilting angle in reverse went back to 90 percent. So it looks like many things got overridden. Will see if something does not work right the next time I drive the car.

Coding for the 5 blinkers consists of 2 changes:

1- change the blinkers to a count of 5
2- change the option menu display to allow for the selection of 5 blinks in iDrive.

What got reset for most of us was the display selection. But the 5 blinks were still active.
If you go in the menu, neither option is selected (1 or 3 blinks).

When you say your 5 blinks were reset, are you referring to what you saw on screen or actual blinker usage?
If you choose an option (1 or 3) then it’ll take that choice.

[J-RO]

Did anyone notice the cross traffic audible alert actually working? Today when I backed out of a space it actually made a sound.

[M2siast]

Originally Posted by J-RO

Did anyone notice the cross traffic audible alert actually working? Today when I backed out of a space it actually made a sound.

I don’t think I’ve ever backed out of a spot, that I can recall. Good to have feature if you ask me, glad it works as you’re describing it!

[fangelov]

Originally Posted by M2siast

Coding for the 5 blinkers consists of 2 changes:

1- change the blinkers to a count of 5
2- change the option menu display to allow for the selection of 5 blinks in iDrive.

What got reset for most of us was the display selection. But the 5 blinks were still active.
If you go in the menu, neither option is selected (1 or 3 blinks).

When you say your 5 blinks were reset, are you referring to what you saw on screen or actual blinker usage?
If you choose an option (1 or 3) then it’ll take that choice.

After the update I only had option for 3 blinks max. After coding again with BimmerCode I got the option to select 5. This is the third time I have coded it so far ;-)

[1stM]

It's all updated without any issue.

[DarkNight707]

Very strange. I went thru the entire process of dowloading to the phone and going to the car and then the car and app gosted me saying There are no updates for your car

[Trogster]

48-hours after this update and my M2 is now throwing error codes....pedestrians beware!!!!

More half-baked tech!!

[M2siast]

Originally Posted by Trogster

48-hours after this update and my M2 is now throwing error codes....pedestrians beware!!!!

More half-baked tech!!

Oh shit…

I think the issue is that you’re listening to AM radio.

[abrandonment]

Dust on the steering column also can cause errors.

[Trogster]

Tough crowd.