|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Please help with two tough problems
|
|
10-12-2024, 11:23 AM | #1 |
First Lieutenant
116
Rep 334
Posts |
Please help with two tough problems
Recently moved to a single setup and having two problems that are giving us fits… after doing much research, watching vids etc, not sure what else to try
First first is, occasionally the car was throwing a 2A8D only upon startup. If I cleared the code, it seemed to run fine. Now, I’m getting this code every time I start the car up and I have to clear it. Frustrating The other issue is, every once in a while under normal driving, the car will immediately start running extremely run and start dying. No codes, nothing if I restart the car, it continues. HOWEVER, if I RE-FLASH the map, any map, that goes away and it starts running normally again and won’t happen for a while. Here is a list of things I’ve replaced trying to replace these very frustrating issues: new index 12 injectors, new eldor coils, new plugs gapped to .01& In in the process of ordering a new 3.5 tmap to try and get rid of the first issue. In the first issue I’m also wondering if maybe the watergate actuator is messing up? I have no other guesses on the second issue. Anyone else had either of these two issues? Any help would be greatly appreciated.
__________________
2010 335XI, Carillo Steel rods, JE pistons, Closed Deck, Stage 4 race heads, 6mt, Pure Stage 2 High Flows, B58 Coils, VRSF|Vu Brothers (Ft Worth, TX)|JSRTuning,
https://youtube.com/channel/UC_kL3RvFSGv9QmTVt6787gg |
Bookmarks |
|
|