[gaffasbm]

Hello . I'm fairly new to the site was hoping to get some info on this subject.
I have a e90 2009 LCI with halogen headlights. I have decided to retro fit the bi xenon adaptive headlights. So far I have fitted a used FRM module ( AHL LED frm2 ) fitted the xenons headlights rewired them both at the frm and headlights. Retro fitted ride hight sensors , retro fitted RLS ,also retro fitted The FLA high beam assist and the auto wiper stalk..the FRM module has already got HBA coded to it because before I fitted the fla I had a warning on the dash . Currently I have no warning and the lights work fine. I want to code in all the retro fitted parts to the car. I would like the adaptive cornering lights to work
Would I only need to code the Cas or will I need to do both? Chassis number on frm is different to cas . Will I need to re-wite this in the frm ?
Any help appreciated

[ptpending]

you need to code frm and kombi at least and if you have monitor - then navi headunit
cas and frm also have secondary function - to store the option list string

[gaffasbm]

Originally Posted by ptpending

you need to code frm and kombi at least and if you have monitor - then navi headunit
cas and frm also have secondary function - to store the option list string

hi thanks for the reply . i would still need to code FRM even tho its already programmed to have bi adaptive and high beam assist?

see i have the pro nav (cic) so will need coding aswell. this seems like a job for the pros. is there anyone who could do this remotely if i hooked my laptop up to the car and had some one remotly do it for a fee?

[ptpending]

you (or only i) do not know to which car with which headlights frm2 was coded
to it is better to recode
if you have coding setup on laptop then it is possible to code by someone remotely using teamviewer or anydesk
but there are so many youtube videos that you could try to figure out by yourself