AUTOID x Westforged Forged Alloy Wheels Fitted + Loads of other mods!

iMnot · 05-27-2022, 06:02 PM

I need those wheels! That g42 looks good. It’ll probably look 🔥 without the decal.

shonseb · 08-11-2022, 12:50 AM

Liking this set up. Got a couple of questions:
1. Are you running spacers? Looks pretty flush
2. Still running the stock summer tires (star) with a little stretch?
3. Any rubbing? If I ran slightly wider tires (assuming these tires are the stock width), would you expect there to be some rubbing?
4. ZTK/M performance brakes?
5. Can Westforged make a similar spec, except for 18", and would they clear the 374mm brakes? Thinking about for track use

Thanks in advance

Jack@AUTOID · 08-12-2022, 10:58 AM

Quote:

Originally Posted by shonseb

Liking this set up. Got a couple of questions:
1. Are you running spacers? Looks pretty flush
2. Still running the stock summer tires (star) with a little stretch?
3. Any rubbing? If I ran slightly wider tires (assuming these tires are the stock width), would you expect there to be some rubbing?
4. ZTK/M performance brakes?
5. Can Westforged make a similar spec, except for 18", and would they clear the 374mm brakes? Thinking about for track use

Thanks in advance

Hey bud.

Yes. We went conservative on offset for the first set to check fitment as no one had done before. 15mm front. 8mm rear. But offsets in first post account for that.
Yeah, stock tires with a stretch at the moment.
No rubbing whatsoever currently. With this set up you would get rubbing if you ran wider tyres, 100%. 265+ I would increase offset.
Yeah, upgrades brakes on my car.
This could definitely be looked into and most likely arranged. However I can’t confirm the 18s would clear the brakes. It would definitely be close and I think you may suffer with stones getting stock between calliper and wheel. Would need to measure to be sure.

E63M6_G42M240i · 08-12-2022, 10:35 PM

No stretch tires here. 285/35/19 rear no spacers 245/40/19 front with 12mm spacers. H&R drop.

George@WestForged · 08-18-2023, 03:02 PM

Glad to be part of the build, here's to many more!

Blue Angel · 08-18-2023, 08:08 PM

Quote:

Originally Posted by George@WestForged

Glad to be part of the build, here's to many more!

You just missed the anniversary party…

05-27-2022, 06:02 PM	#45
iMnot New Member 8 Rep 16 Posts Drives: 2 Join Date: Dec 2017 Location: California iTrader: (0)	I need those wheels! That g42 looks good. It’ll probably look 🔥 without the decal.
	Appreciate 1 mblaucoupe135284.50 Quote

08-11-2022, 12:50 AM	#46
shonseb Private First Class 149 Rep 140 Posts Drives: '23 240ix, gone: '14 Audi RS5 Join Date: May 2018 Location: Westchester, NY iTrader: (0) Garage List 2023 m240ix [0.00]	Liking this set up. Got a couple of questions: 1. Are you running spacers? Looks pretty flush 2. Still running the stock summer tires (star) with a little stretch? 3. Any rubbing? If I ran slightly wider tires (assuming these tires are the stock width), would you expect there to be some rubbing? 4. ZTK/M performance brakes? 5. Can Westforged make a similar spec, except for 18", and would they clear the 374mm brakes? Thinking about for track use Thanks in advance
	Appreciate 1 mblaucoupe135284.50 Quote

08-12-2022, 10:35 PM	#48
E63M6_G42M240i Lieutenant 675 Rep 450 Posts Drives: 2024 TR G80 M3CX Join Date: Jul 2022 Location: Orange County, CA, USA iTrader: (0)	No stretch tires here. 285/35/19 rear no spacers 245/40/19 front with 12mm spacers. H&R drop. Attached Images
	Appreciate 1 mblaucoupe135284.50 Quote

08-18-2023, 03:02 PM	#49
George@WestForged West Forged 0 Rep 3 Posts Drives: BMW M2 Join Date: Aug 2023 Location: United Kingdom iTrader: (0)	Glad to be part of the build, here's to many more!
	Appreciate 0 Quote