Laptorr Exhaust, AA headers, 3SIM Sound Clips

Minutes2Midnight · 05-06-2019, 07:06 PM

Good afternoon, fellow N/A enthusiasts.

I felt like sharing my N52 'build' with some people who may appreciate it. It put down 242whp/229wtq on the Dyno in current spec with the following mods:

Active Autowerke catless headers
3 stage intake manifold
BPC header/3SIM tune
Laptorr header back exhaust
Turner Motorsport intake

It's pretty loud with headers and no cats at WOT, with a lot of rasp between 2k and 2.3k RPMs so I may try to address that with a different resonator. Overall I'm really pleased with it.

I hope you guys like it!

Cheers.

Biginboca · 05-06-2019, 07:31 PM

Sounds good!

Kubricks · 05-06-2019, 09:03 PM

I always wanted a Laptorr exhaust, until I saw the price... ouch.
Very nice sound indeed!

bluewater328 · 05-06-2019, 09:47 PM

Quote:

Originally Posted by Kubricks

I always wanted a Laptorr exhaust, until I saw the price... ouch.
Very nice sound indeed!

Same opinion...probably going with a Magnaflow instead.

Jagtem · 05-06-2019, 10:24 PM

Man, that's loud. To be honest, I've never been a fan of the sound of any BMW straight six. They all just sound raspy.

But the power numbers are impressive!

squaredphoto · 05-06-2019, 10:46 PM

Someone else has a Laptorr!

Do you have any clips of just the laptorr on without any other exhaust changes?

Minutes2Midnight · 05-06-2019, 11:05 PM

Quote:

Originally Posted by Kubricks

I always wanted a Laptorr exhaust, until I saw the price... ouch.
Very nice sound indeed!

The Japanese exchange rates are different now than they were in older discussion threads, so it's just over Eisenmann and Supersprint full exhaust price range now.

My favorite part about it that makes it different from others I've heard is the high pitched revs. I'm glad you like it!

Quote:

Originally Posted by Jagtem

Man, that's loud. To be honest, I've never been a fan of the sound of any BMW straight six. They all just sound raspy.

But the power numbers are impressive!

It's definitely loud at WOT, but it's surprisingly comfortable at highway speeds and at half throttle. It's not for everybody! Personally the N/A Inline 6 is one of my favorite motors, especially in vintage Skylines and Datsuns.

Hopefully we'll be able to find even more power in this motor

Quote:

Originally Posted by squaredphoto

Someone else has a Laptorr!

Do you have any clips of just the laptorr on without any other exhaust changes?

Sadly I don't! I installed the headers and exhaust at the same time. I have a feeling that it works best with the stock exhaust manifold, because the muffler and resonator definitely aren't enough to keep the headers quiet!

Kubricks · 05-06-2019, 11:33 PM

Quote:

Originally Posted by Minutes2Midnight

The Japanese exchange rates are different now than they were in older discussion threads, so it's just over Eisenmann and Supersprint full exhaust price range now.

My favorite part about it that makes it different from others I've heard is the high pitched revs. I'm glad you like it!

I love the fact that it doesn't seem to drone on cruising speed even without the resonator. Good choice.

Noir · 05-07-2019, 11:28 PM

that. sounds. so. sick.

Volasko · 05-08-2019, 04:18 PM

I agree aside from a little rasp this sounds the business. Very unique, I like it well done!

yupetc · 05-09-2019, 10:10 AM

So what hp/tq figure does this setup achieve? Just curious as I've pretty much congruent setup except for the exhaust, and I still refuse to have it any louder than it is with just the catless headers on the car. Still lurking around to see what exhaust may work for me and what estimated figures are out there.

3002 tii · 05-11-2019, 09:20 AM

Quote:

Originally Posted by yupetc

So what hp/tq figure does this setup achieve? Just curious as I've pretty much congruent setup except for the exhaust, and I still refuse to have it any louder than it is with just the catless headers on the car. Still lurking around to see what exhaust may work for me and what estimated figures are out there.

perhaps you should read the first post

Silnismo · 05-17-2019, 12:49 PM

Car sounds great!

Looking to get the turner intake soon, any complaints?

Minutes2Midnight · 05-19-2019, 07:55 PM

Quote:

Originally Posted by Silnismo

Car sounds great!

Looking to get the turner intake soon, any complaints?

Thank you!

The intake sounds really good. As far as the install goes it's super simple. There are two bolts on the subframe that screw into the bottom of the intake's metal housing. One of the bolts (on my car at least) was already being used to hold a hose bracket. You'll just have to undo that and set it aside.

tom.gnade · 05-21-2019, 12:21 PM

Hell yah, that sounds good!

Ethan Skinner · 05-27-2019, 09:20 AM

Quote:

Originally Posted by Jagtem

Man, that's loud. To be honest, I've never been a fan of the sound of any BMW straight six. They all just sound raspy.

But the power numbers are impressive!

As long as you keep your resonator or at least one set of cats there is little to no rasp I have AA headers with muffler delete (kept secondary cats and resonator) and I have no problem with raspiness

Jagtem · 05-29-2019, 09:43 PM

Quote:

Originally Posted by Ethan Skinner

As long as you keep your resonator or at least one set of cats there is little to no rasp I have AA headers with muffler delete (kept secondary cats and resonator) and I have no problem with raspiness

Hmm... Now I'm thinking... one of my only remaining gripes with my car is that it's a little too quiet. I've already done the charcoal filter delete, intake resonator delete and K&N filter in the hopes of getting some induction noise, but it would be nice to get a little more volume down low so I can tell where my revs are when driving aggressively. Does anyone do a reasonably inexpensive axle-back/ muffler replacement that isn't too loud?

Ethan Skinner · 05-30-2019, 11:29 AM

Quote:

Originally Posted by Jagtem

Quote:

Originally Posted by Ethan Skinner

As long as you keep your resonator or at least one set of cats there is little to no rasp I have AA headers with muffler delete (kept secondary cats and resonator) and I have no problem with raspiness

Hmm... Now I'm thinking... one of my only remaining gripes with my car is that it's a little too quiet. I've already done the charcoal filter delete, intake resonator delete and K&N filter in the hopes of getting some induction noise, but it would be nice to get a little more volume down low so I can tell where my revs are when driving aggressively. Does anyone do a reasonably inexpensive axle-back/ muffler replacement that isn't too loud?

Every muffler replacement you can find will be 300+ but I suggest getting a local muffler shop to do a muffler delete it will be 80-100 dollars for single exit and I did that, had no problem with raspiness and it was not to loud at all. I will say once you get rid of your stock muffler and run headers you will definitely be turning heads as the car gets some real volume to it. Not raspy or too much drone but loud for sure. Also with a muffler delete you will be pleased with some pops and crackles when letting off in third. Pretty cool.

vivalahueva · 06-01-2019, 10:15 PM

Sounds amazing!!!

E92inAZ · 06-02-2019, 02:33 AM

That's LOUD!

Sounds good though.
I have the same set up plus an afe intake box but I run the AA gen2 muffler. This is definitely louder through the rev range and more consistent where mine seems to come and go.

Also: I, too, really enjoy the sound of a well tuned straight six

E92inAZ · 06-02-2019, 06:17 AM

One more thing: that SOUNDS pretty good.
I'm not trying to hijack the thread but I trolled every sound clip I could find before buying my muffler and most sounded pretty dirty. What did you use to record this clip?

Minutes2Midnight · 06-02-2019, 12:29 PM

Quote:

Originally Posted by vivalahueva

Sounds amazing!!!

Quote:

Originally Posted by tom.gnade

Hell yah, that sounds good!

Thanks for the kind words! I'm glad you like it.

Quote:

Originally Posted by E92inAZ

That's LOUD!

Sounds good though.
I have the same set up plus an afe intake box but I run the AA gen2 muffler. This is definitely louder through the rev range and more consistent where mine seems to come and go.

Also: I, too, really enjoy the sound of a well tuned straight six

It's the loudest after a cold start until the motor gets warmed up! The system the way I have it can make a really raspy sound around 2k rpms, but after that it just screams. It's also really cool to feel the power when the DISA flaps open through the rev range!

I actually just recorded it with my old DSLR. It's the entry level Canon Rebel T3, but I've gotten some awesome shots with it. This was my first time recording video with it!

05-06-2019, 07:06 PM	#1
Minutes2Midnight Private First Class 269 Rep 101 Posts Drives: '08 E92 328i Join Date: Mar 2015 Location: United States iTrader: (0)	Laptorr Exhaust, AA headers, 3SIM Sound Clips Good afternoon, fellow N/A enthusiasts. I felt like sharing my N52 'build' with some people who may appreciate it. It put down 242whp/229wtq on the Dyno in current spec with the following mods: Active Autowerke catless headers 3 stage intake manifold BPC header/3SIM tune Laptorr header back exhaust Turner Motorsport intake It's pretty loud with headers and no cats at WOT, with a lot of rasp between 2k and 2.3k RPMs so I may try to address that with a different resonator. Overall I'm really pleased with it. I hope you guys like it! Cheers.
	Appreciate 4 desertman1232238.50 E92inAZ40.00 firesnatch26.50 AmuroRay2952.00 Tweet Quote

05-06-2019, 07:31 PM	#2
Biginboca Colonel 3791 Rep 2,738 Posts Drives: 2009 E92 328i 6MT Join Date: Jun 2017 Location: Boynton Beach, FL... USA iTrader: (3)	Sounds good! __________________ My E92 328csl Build Thread My 328csl Instagram Page
	Appreciate 0 Quote

05-06-2019, 09:03 PM	#3
Kubricks Private First Class 153 Rep 177 Posts Drives: 130i M/T Join Date: May 2009 Location: Taunton UK iTrader: (0)	I always wanted a Laptorr exhaust, until I saw the price... ouch. Very nice sound indeed! __________________ 130i manual \| ESS Supercharged \| Custom remap Birds B1 Suspension set \| Vorshlag Camber plate \| Quaife Limited slip differential \| M3 Chassis parts
	Appreciate 0 Quote

05-06-2019, 10:24 PM	#5
Jagtem Private 26 Rep 73 Posts Drives: 2006 330i / 2004 F150 /2009 R1 Join Date: Mar 2019 Location: San Diego iTrader: (0)	Man, that's loud. To be honest, I've never been a fan of the sound of any BMW straight six. They all just sound raspy. But the power numbers are impressive!
	Appreciate 0 Quote

05-06-2019, 10:46 PM	#6
squaredphoto First Lieutenant 375 Rep 317 Posts Drives: E91 Join Date: Nov 2017 Location: Chicago iTrader: (3) Garage List 2018 BMW 340i [0.00]	Someone else has a Laptorr! Do you have any clips of just the laptorr on without any other exhaust changes? __________________ flickr portfolio blog instagram
	Appreciate 0 Quote

05-07-2019, 11:28 PM	#9
Noir Major 893 Rep 1,413 Posts Drives: 2006 E90 330i 6MT Join Date: Aug 2016 Location: San Antonio iTrader: (1)	that. sounds. so. sick. __________________ See you, space cowboy. *Supercharged*
	Appreciate 0 Quote

05-08-2019, 04:18 PM	#10
Volasko Colonel 726 Rep 2,609 Posts Drives: 06 330i E90, 18 530xe G30 Join Date: Dec 2010 Location: Toronto iTrader: (2) Garage List 2018 BMW 530e M Sport [9.00] 2006 BMW E90 330i [8.28]	I agree aside from a little rasp this sounds the business. Very unique, I like it well done!
	Appreciate 0 Quote

05-09-2019, 10:10 AM	#11
yupetc Captain 418 Rep 691 Posts Drives: 2015 X535i Join Date: Feb 2013 Location: Houston, TX iTrader: (0)	So what hp/tq figure does this setup achieve? Just curious as I've pretty much congruent setup except for the exhaust, and I still refuse to have it any louder than it is with just the catless headers on the car. Still lurking around to see what exhaust may work for me and what estimated figures are out there. __________________ 2017 540i - MHD2+, VRSF DP, TU Pump 2015 X535i - CP Pistons, Manley Rods, Irox coated bearings, Cometic head gasket, Wagner head studs, M2 crankshaft, MILVs VRSF charge Pipe, Wagner FMIC PURE500 turbo, MHD2+ VRSF DP, B58 HPFP UR Front/Rear Sway Bars, Eibach springs, Bilstein B6
	Appreciate 0 Quote

05-17-2019, 12:49 PM	#13
Silnismo Second Lieutenant 226 Rep 290 Posts Drives: BMW 325i Join Date: Aug 2018 Location: NJ iTrader: (1)	Car sounds great! Looking to get the turner intake soon, any complaints?
	Appreciate 0 Quote

05-21-2019, 12:21 PM	#15
tom.gnade Apex Forged 19", AA headers, MILVs, 3IM, Euro Intake, Swift Spec-R 89 Rep 255 Posts Drives: 2013 328i coupe Join Date: May 2016 Location: Forest Hill, MD iTrader: (1) Garage List 2013 BMW 328i [0.00]	Hell yah, that sounds good!
	Appreciate 0 Quote

06-01-2019, 10:15 PM	#19
vivalahueva New Member 2 Rep 5 Posts Drives: Bmw 325i 335i Join Date: Jun 2019 Location: Guatemala iTrader: (0)	Sounds amazing!!!
	Appreciate 0 Quote

06-02-2019, 02:33 AM	#20
E92inAZ Private 40 Rep 74 Posts Drives: 2007 E92 coupe Join Date: Jul 2015 Location: Glendale, AZ iTrader: (0)	That's LOUD! Sounds good though. I have the same set up plus an afe intake box but I run the AA gen2 muffler. This is definitely louder through the rev range and more consistent where mine seems to come and go. Also: I, too, really enjoy the sound of a well tuned straight six __________________ 2007 E92 328i coupe. 19" staggered VMR v710, front: 19x8.5 et35 continental 235/35 19, rear: 19x9.5 et33 continental 265/30 19; 1 inch front lowering perches; Msport rear bumper; roof spoiler; trunk lip; Bavsound UF110; carbon fiber wrapped interior trim; 3 stage BMW intake manifold; aFe magnum force stage 2 si pro 5R cold air intake; active autowerkes catless header; active autowerkes gen 2 signature exhaust; BPC stage 2 header tune
	Appreciate 0 Quote

06-02-2019, 06:17 AM	#21
E92inAZ Private 40 Rep 74 Posts Drives: 2007 E92 coupe Join Date: Jul 2015 Location: Glendale, AZ iTrader: (0)	One more thing: that SOUNDS pretty good. I'm not trying to hijack the thread but I trolled every sound clip I could find before buying my muffler and most sounded pretty dirty. What did you use to record this clip? __________________ 2007 E92 328i coupe. 19" staggered VMR v710, front: 19x8.5 et35 continental 235/35 19, rear: 19x9.5 et33 continental 265/30 19; 1 inch front lowering perches; Msport rear bumper; roof spoiler; trunk lip; Bavsound UF110; carbon fiber wrapped interior trim; 3 stage BMW intake manifold; aFe magnum force stage 2 si pro 5R cold air intake; active autowerkes catless header; active autowerkes gen 2 signature exhaust; BPC stage 2 header tune
	Appreciate 0 Quote