** Evolve Switchable Remap - Special forum pricing ** (User/Install Guide in Post #1)

Imran@Evolve · 01-28-2010, 06:39 AM

The Evolve Switch

Giving you the power to switch between standard and Evolve remap within 5 minutes. No matter where you are you can benefit from an Evolve ECU remap.

Offer is available at £535 inc VAT for all Deisel engined cars - free shipping to UK. Shipping to Europe is £20.

The Installation & User Guide is available HERE

Dyno Graphs

BMW 2.0d 177bhp pre March 2009

BMW 2.0d 163bhp

BMW 3.0d 231bhp

BMW 335d 286bhp Not applicable to US models.

For further information please PM, email ( imran@evo-s.co.uk ) or call + 44 1582 573 801.

We will post up our 2010 discount structure for normal ECU remaps soon.

lons · 01-28-2010, 07:12 PM

Quote:

Originally Posted by Imran@Evolve

The Evolve Switch

Giving you the power to switch between standard and evolve tune within 5 minutes. No matter where you are you can benefit from an evolve ECU remap.

Offer is available at £535 inc VAT for all Deisel engined cars - free shipping to UK. Shipping to Europe is £20.

Dyno Graphs

BMW 2.0d 177bhp pre March 2009

BMW 2.0d 163bhp

BMW 3.0d 231bhp

BMW 335d 286bhp Not applicable to US models.

For further information please PM, email ( imran@evo-s.co.uk ) or call + 44 1582 573 801.

We will post up our 2010 discount structure for normal ECU remaps soon.

Hi Imran

Why are the figures on the 2.0 177bhp almost identical up to around 2000rpm pre-map / mapped?

the other engines show marked difference right from the start.

Also, the torque gains over original looks considerably lower compared to the other engines.

e.g.
177 @ 280 lbft to 337 lbft = +20%
163 @ 258 lbft to 340 lbft = +31%

Or am I reading it wrongly?

Imran@Evolve · 02-04-2010, 04:17 AM

The power follows the original curve to begin with at full load on the manual cars to protect the clutch.

You can read a review of the upgrade by BMW Car magazine here

The other engines are more tuneable. Any more power on the 320d 177 and you start to get transmission rumble.

lons · 02-04-2010, 05:41 PM

Quote:

Originally Posted by Imran@Evolve

The power follows the original curve to begin with at full load on the manual cars to protect the clutch.

You can read a review of the upgrade by BMW Car magazine here

The other engines are more tuneable. Any more power on the 320d 177 and you start to get transmission rumble.

Thanks Imran

I get it now

blisstik · 02-05-2010, 03:55 PM

Hi Imran,

I'm just wondering when will the switcher be available to 335i owners? Any estimate cost in US$ for the switcher and flash combo?

nmf69 · 02-06-2010, 05:29 AM

Hi,

An "old" question:
When will be the switch available for the LCI modells?
Say 318d from may 2009...
Thanks

Imran@Evolve · 02-06-2010, 10:32 AM

Quote:

Originally Posted by darklocust

Hi Imran,

I'm just wondering when will the switcher be available to 335i owners? Any estimate cost in US$ for the switcher and flash combo?

I estimated the first 1/4 of 2010 and I 'm sticking to that estimation

Imran@Evolve · 02-06-2010, 10:33 AM

Quote:

Originally Posted by nmf69

Hi,

An "old" question:
When will be the switch available for the LCI modells?
Say 318d from may 2009...
Thanks

No estimation on this at present.

MikeinPoland · 02-09-2010, 11:10 AM

Hi Imran,

Add a customer for the 318D LCI on the switch when you have one ready.

Imran@Evolve · 02-17-2010, 11:36 AM

Current batch sold out.

I have some more coming in tomorrow.

Thank you for your orders.

Jules6 · 02-17-2010, 02:40 PM

Hi Imran,

Do you have any graphs for the E92 325D?

Imran@Evolve · 02-18-2010, 06:11 AM

Quote:

Originally Posted by Jules6

Hi Imran,

Do you have any graphs for the E92 325D?

I will have on Saturday as its the first time we are getting one back on the rollers after we lost our dyno graph database.

yian77 · 02-18-2010, 07:26 AM

Hi Imran,

So the graph for the 320d is for a manual car. Does the auto has the same limitations or is the graph different?

Another one or two questions if I may. If I am worried about my car and I just want 205-210 HP and 310-320 lb/ft torque is that possible. Will the graph be as smooth as the one you show?

Can I have two maps on the switch? The normal map and a more conservative one (eg based on economy providing more mpg) and is there a problem switching often between maps.

Thanks

NFS · 02-20-2010, 02:51 PM

Will there be an evolve switch for petrol cars?

I really like the idea of being able to switch the map back to standard before putting the car in for servicing etc.

Jules6 · 02-21-2010, 12:21 PM

Quote:

Originally Posted by Imran@Evolve

I will have on Saturday as its the first time we are getting one back on the rollers after we lost our dyno graph database.

Any joy?

Imran@Evolve · 02-22-2010, 04:16 AM

Yes - here you go. An additional 40-60 Ft/lbs Torque and 40-50 BHP.

This was a manual car.

The owner of this car is a forum member so hopefully he will put a review up soon.

Imran@Evolve · 02-22-2010, 04:17 AM

Quote:

Originally Posted by NFS

Will there be an evolve switch for petrol cars?

I really like the idea of being able to switch the map back to standard before putting the car in for servicing etc.

Coming soon

Imran@Evolve · 02-22-2010, 04:20 AM

Quote:

Originally Posted by yian77

Hi Imran,

So the graph for the 320d is for a manual car. Does the auto has the same limitations or is the graph different?

Another one or two questions if I may. If I am worried about my car and I just want 205-210 HP and 310-320 lb/ft torque is that possible. Will the graph be as smooth as the one you show?

Can I have two maps on the switch? The normal map and a more conservative one (eg based on economy providing more mpg) and is there a problem switching often between maps.

Thanks

The auto can take more power.

Here is a graph from an auto - as you can see it is very smooth.

You can have less power if you want. We can also provide an additional map but this would incur an additional cost. We feel that additional maps are just a gimmick as the remaps we give as default provide extra MPG anyway.

There is not problem with switching maps often if the instructions are followed correctly.

Jules6 · 02-22-2010, 07:31 AM

Quote:

Originally Posted by Imran@Evolve

Yes - here you go. An additional 40-60 Ft/lbs Torque and 40-50 BHP.

This was a manual car.

The owner of this car is a forum member so hopefully he will put a review up soon.

Thanks Imran.

This suggests that BMW massively under quote for the 325d (marketing?).

Looking at the other graphs this also appears to be true of the 330d albeit to a lesser extent but the two 320d versions and 335d appear close to quoted.

Mine also is a manual so I shall look forward to a review as I am still very interested.

Imran@Evolve · 02-22-2010, 09:44 AM

Most diesels have put down more power on the dyno than quoted.

NFS · 02-22-2010, 12:45 PM

Quote:

Originally Posted by Imran@Evolve

Coming soon

Ohhh ... will it work with the LCI 335i?

I'll be watching with interest.

willhollin · 02-22-2010, 12:49 PM

Quote:

Originally Posted by NFS

Ohhh ... will it work with the LCI 335i?

I'll be watching with interest.

Is this for the "imaginary" 335i you have?

01-28-2010, 06:39 AM	#1
Imran@Evolve 5476 Rep 3,815 Posts Drives: All of them Join Date: Jun 2008 Location: Bedfordshire UK iTrader: (0)	Evolve Switchable Remap - Special forum pricing (User/Install Guide in Post #1) The Evolve Switch Giving you the power to switch between standard and Evolve remap within 5 minutes. No matter where you are you can benefit from an Evolve ECU remap. Offer is available at £535 inc VAT for all Deisel engined cars - free shipping to UK. Shipping to Europe is £20. The Installation & User Guide is available HERE Dyno Graphs BMW 2.0d 177bhp pre March 2009 BMW 2.0d 163bhp BMW 3.0d 231bhp BMW 335d 286bhp Not applicable to US models. For further information please PM, email ( imran@evo-s.co.uk ) or call + 44 1582 573 801. We will post up our 2010 discount structure for normal ECU remaps soon. Last edited by Imran@Evolve; 03-03-2011 at 07:18 AM..
	Appreciate 0 Tweet Quote

02-04-2010, 04:17 AM	#3
Imran@Evolve 5476 Rep 3,815 Posts Drives: All of them Join Date: Jun 2008 Location: Bedfordshire UK iTrader: (0)	The power follows the original curve to begin with at full load on the manual cars to protect the clutch. You can read a review of the upgrade by BMW Car magazine here The other engines are more tuneable. Any more power on the 320d 177 and you start to get transmission rumble. Last edited by Imran@Evolve; 02-04-2010 at 04:23 AM..
	Appreciate 0 Quote

02-05-2010, 03:55 PM	#5
blisstik Lieutenant Colonel 158 Rep 1,677 Posts Drives: E92 Join Date: Jul 2009 Location: California iTrader: (14)	Hi Imran, I'm just wondering when will the switcher be available to 335i owners? Any estimate cost in US$ for the switcher and flash combo?
	Appreciate 0 Quote

02-06-2010, 05:29 AM	#6
nmf69 Private 5 Rep 73 Posts Drives: G20 BMW 320d Join Date: Apr 2009 Location: The Netherlands iTrader: (0)	Hi, An "old" question: When will be the switch available for the LCI modells? Say 318d from may 2009... Thanks
	Appreciate 0 Quote

02-09-2010, 11:10 AM	#9
MikeinPoland New Member 4 Rep 29 Posts Drives: F30 328iX, Type R FK8 Join Date: Jan 2010 Location: Poland iTrader: (0)	Hi Imran, Add a customer for the 318D LCI on the switch when you have one ready.
	Appreciate 0 Quote

02-17-2010, 11:36 AM	#10
Imran@Evolve 5476 Rep 3,815 Posts Drives: All of them Join Date: Jun 2008 Location: Bedfordshire UK iTrader: (0)	Current batch sold out. I have some more coming in tomorrow. Thank you for your orders.
	Appreciate 0 Quote

02-17-2010, 02:40 PM	#11
Jules6 Second Lieutenant 8 Rep 244 Posts Drives: F31 330d M Sport Join Date: Nov 2008 Location: Devon iTrader: (0) Garage List 2020 G21 330i M Spo ... [0.00]	Hi Imran, Do you have any graphs for the E92 325D?
	Appreciate 0 Quote

02-18-2010, 07:26 AM	#13
yian77 Enlisted Member 4 Rep 48 Posts Drives: F36 430d auto Join Date: Jan 2009 Location: cyprus iTrader: (0)	Hi Imran, So the graph for the 320d is for a manual car. Does the auto has the same limitations or is the graph different? Another one or two questions if I may. If I am worried about my car and I just want 205-210 HP and 310-320 lb/ft torque is that possible. Will the graph be as smooth as the one you show? Can I have two maps on the switch? The normal map and a more conservative one (eg based on economy providing more mpg) and is there a problem switching often between maps. Thanks
	Appreciate 0 Quote

02-20-2010, 02:51 PM	#14
NFS Major General 283 Rep 9,218 Posts Drives: M340i Join Date: Jul 2006 Location: UK iTrader: (0)	Will there be an evolve switch for petrol cars? I really like the idea of being able to switch the map back to standard before putting the car in for servicing etc.
	Appreciate 0 Quote

02-22-2010, 04:16 AM	#16
Imran@Evolve 5476 Rep 3,815 Posts Drives: All of them Join Date: Jun 2008 Location: Bedfordshire UK iTrader: (0)	Yes - here you go. An additional 40-60 Ft/lbs Torque and 40-50 BHP. This was a manual car. The owner of this car is a forum member so hopefully he will put a review up soon.
	Appreciate 0 Quote

02-22-2010, 09:44 AM	#20
Imran@Evolve 5476 Rep 3,815 Posts Drives: All of them Join Date: Jun 2008 Location: Bedfordshire UK iTrader: (0)	Most diesels have put down more power on the dyno than quoted.
	Appreciate 0 Quote