Mishimoto Skid Plate Installed

Rx-7ames · 09-26-2023, 03:20 PM

After having my M2 in the shop for a week replacing an auxiliary radiator I decided to pre-emptively protect against future rock incidents. Step one is the Mishimoto skid plate that fits the M2/M3/M4 G8X series. I had my shop tech install it today and boy is it nice.

Installation was a breeze. I was quoted a half hour for labor. Everything matched up perfectly. The quality is great. The plate is nice and thick but not heavy at all.

Other threads have talked about skid plates not utilizing the OEM air damn in front of the oil cooler. This gasket is removed to install the Mishimoto skid plate but it is replicated to get the OEM air flow. You can see it in my pictures below.

Clearance is about the same as the OEM plastic skid plate that is removed. It might be a little bit lower but it's hard to tell.

I think it will be nearly impossible now for a rock to cause damage to the oil cooler. This is a no-brainer for $500. I wish BMW had done this themselves considering people are paying $70-80k for these, but what can you do?

Tag · 09-26-2023, 03:27 PM

This mod is worth every penny.

That looks really nice and I like the fact that the Mishimoto skid plate reuses factory mount point and doesn't require cutting anything.

BMW has been putting oil coolers underneath M cars for years now. Agree, it's nuts that it's not protect better from factory.

DCC · 09-27-2023, 06:41 AM

Is the oil drain bolt now behind the plate?

HulkMansfield · 09-27-2023, 08:44 AM

another product to add to my grocery list while I wait for my car

Rx-7ames · 09-27-2023, 09:30 AM

Quote:

Originally Posted by DCC

Is the oil drain bolt now behind the plate?

No, that's much further back. This doesn't block anything. It actually replaced a plastic kid plate with a big hole cut in it for the oil cooler.

Sculpin · 09-28-2023, 07:32 AM

Thanks for sharing this. Do you have a pic with the stock plate on the car? Or just a pic of it on the ground? I don't have my car yet so I don't know what it looks like.

Rx-7ames · 09-28-2023, 08:07 AM

Quote:

Originally Posted by Sculpin

Thanks for sharing this. Do you have a pic with the stock plate on the car? Or just a pic of it on the ground? I don't have my car yet so I don't know what it looks like.

I do not have a picture of the stock plate but it should not be hard to find online.

mrdudley · 09-28-2023, 09:30 AM

Quote:

Originally Posted by Sculpin

Thanks for sharing this. Do you have a pic with the stock plate on the car? Or just a pic of it on the ground? I don't have my car yet so I don't know what it looks like.

This is the photo on Mishimoto website. Though might be a G82. Says it works across G8x, so guessing stock setup is also similar.

Game · 09-28-2023, 09:50 AM

Looks like a quality piece and I hate that I may have to buy it.

tom @ eas · 09-28-2023, 02:34 PM

We just got a few of these back in stock today, Mishimoto has been backordered lately.

DarkNight707 · 09-29-2023, 12:30 AM

How much an installation like this may cost?

Sculpin · 09-29-2023, 08:06 AM

Quote:

Originally Posted by mrdudley

This is the photo on Mishimoto website. Though might be a G82. Says it works across G8x, so guessing stock setup is also similar.

Oh wow. I didn't realize it was just fully exposed like that. This is going to be the first thing I do when my car arrives.

Rx-7ames · 09-29-2023, 08:55 AM

Quote:

Originally Posted by DarkNight707

How much an installation like this may cost?

My tech said he would charge half an hour of labor since the car was already lifted for another job. I would expect up to an hour of labor, but it is simple and straight forward. I just don't have much time to do stuff like this myself.

DarkNight707 · 09-29-2023, 11:47 AM

Quote:

Originally Posted by Rx-7ames

My tech said he would charge half an hour of labor since the car was already lifted for another job. I would expect up to an hour of labor, but it is simple and straight forward. I just don't have much time to do stuff like this myself.

Got it but how much would a typical tech labor cost be? I have no background on this area.

apez · 09-29-2023, 12:13 PM

Maybe I am way off here... but seems like it is a direct replacement for the factory plastic under tray.

If you have a jack and stands probably pretty easy and quick to DIY. If you don't it should be even easier for a shop, especially if your car is going on a lift.

GregW / Oregon · 09-29-2023, 12:35 PM

Quote:

Originally Posted by DarkNight707

Got it but how much would a typical tech labor cost be? I have no background on this area.

My dealer's stock rate is $299/hour, I believe. Depends on your locale.

GregW / Oregon · 09-29-2023, 01:11 PM

Seems everyone has them for $449.95 right now. Mishimoto offers free economy shipping: https://www.mishimoto.com/bmw-g80-m3...late-2021.html

tom @ eas · 09-29-2023, 01:26 PM

Quote:

Originally Posted by DarkNight707

Got it but how much would a typical tech labor cost be? I have no background on this area.

PM incoming.

Rx-7ames · 09-29-2023, 03:16 PM

Quote:

Originally Posted by DarkNight707

Got it but how much would a typical tech labor cost be? I have no background on this area.

Labor costs are different at every shop. I cannot answer this question.

Rx-7ames · 09-29-2023, 03:20 PM

Quote:

Originally Posted by apez

Maybe I am way off here... but seems like it is a direct replacement for the factory plastic under tray.

If you have a jack and stands probably pretty easy and quick to DIY. If you don't it should be even easier for a shop, especially if your car is going on a lift.

You are not off at all. It's about 20 bolts and they are probably all 10 mm. you can do it with a simple ratchet.

I had my shop do it because I get employee labor rates and I knew it would be easy during the break-in service.

Paying a shop would also be justified for someone who does not own a jack or the most basic wrench set, or someone who simply does not have the time to tinker on a car. 95% of people should simply do this install themselves.

DarkNight707 · 09-29-2023, 05:22 PM

Yeah, it varies but thanks for all the details everyone! I just heard from my CA, the car is getting to the dealership next week… so making a decison soon. Just wish those Zunsport screen were available too!

Ravenseal · 10-01-2023, 12:28 PM

Quote:

Originally Posted by GregW / Oregon

$299/hour.

What the fuck? Lol

09-26-2023, 03:20 PM	#1
Rx-7ames Captain 1894 Rep 753 Posts Drives: '23 M2 Join Date: Nov 2022 Location: Oregon iTrader: (0) Garage List 2023 BMW M2 [5.00]	After having my M2 in the shop for a week replacing an auxiliary radiator I decided to pre-emptively protect against future rock incidents. Step one is the Mishimoto skid plate that fits the M2/M3/M4 G8X series. I had my shop tech install it today and boy is it nice. Installation was a breeze. I was quoted a half hour for labor. Everything matched up perfectly. The quality is great. The plate is nice and thick but not heavy at all. Other threads have talked about skid plates not utilizing the OEM air damn in front of the oil cooler. This gasket is removed to install the Mishimoto skid plate but it is replicated to get the OEM air flow. You can see it in my pictures below. Clearance is about the same as the OEM plastic skid plate that is removed. It might be a little bit lower but it's hard to tell. I think it will be nearly impossible now for a rock to cause damage to the oil cooler. This is a no-brainer for $500. I wish BMW had done this themselves considering people are paying $70-80k for these, but what can you do? Attached Images
	Appreciate 14 Tag18167.00 Trogster465.00 Searay55555376.00 johnnie311197.50 two_three_two518.00 HulkMansfield70.50 Sculpin276.50 KCuv421.50 GuyOh1067.00 BMR.WRLD255.00 6speed_M23635.00 BMW DIY Guy3075.00 Ointment044053.50 ayilar16.00 Tweet Quote

09-26-2023, 03:27 PM	#2
Tag this is the way 18167 Rep 8,530 Posts Drives: N-1 starfighter Join Date: Jan 2007 Location: Chicago iTrader: (3)	This mod is worth every penny. That looks really nice and I like the fact that the Mishimoto skid plate reuses factory mount point and doesn't require cutting anything. BMW has been putting oil coolers underneath M cars for years now. Agree, it's nuts that it's not protect better from factory.
	Appreciate 3 Kevin_The_Clean13296.50 M2siast5876.00 Ronin76752.00 Quote

09-27-2023, 06:41 AM	#3
DCC Major 312 Rep 1,041 Posts Drives: Join Date: Jan 2008 Location: Texas iTrader: (0)	Is the oil drain bolt now behind the plate? __________________ 2024 M2, 2024 CGT4RS, 2020 M2 CS, 2021 Macan GTS, 2017 Cayenne S, 2002 M Coupe
	Appreciate 0 Quote

09-27-2023, 08:44 AM	#4
HulkMansfield Enlisted Member 71 Rep 36 Posts Drives: BMW G87 M2 Join Date: May 2023 Location: Pittsburgh iTrader: (0)	another product to add to my grocery list while I wait for my car
	Appreciate 2 Mr.McNutty350.00 Ronin76752.00 Quote

09-28-2023, 07:32 AM	#6
Sculpin Private First Class 277 Rep 185 Posts Drives: 8Y RS3 Join Date: Aug 2017 Location: Winter Garden, FL iTrader: (0)	Thanks for sharing this. Do you have a pic with the stock plate on the car? Or just a pic of it on the ground? I don't have my car yet so I don't know what it looks like. __________________ 2024 G87 M2 \| 6MT \| Carbon Package \| ///M Performance Suspension 2023 8Y RS3 \| Mrs. Sculpin's car 2011 E90 M3 (Retired) 1995 E36 M3 (Retired)
	Appreciate 0 Quote

09-28-2023, 09:50 AM	#9
Game ------ 7418 Rep 10,219 Posts Drives: G87 M2 (sold) Join Date: Aug 2010 Location: Chicago'ish iTrader: (25)	Looks like a quality piece and I hate that I may have to buy it. __________________
	Appreciate 2 Trogster465.00 Ronin76752.00 Quote

09-28-2023, 02:34 PM	#10
tom @ eas General 8232 Rep 18,830 Posts Drives: BMW Join Date: Nov 2005 Location: Anaheim, CA iTrader: (19) Garage List 2018 BMW i3s [5.00] 2010 BMW M3 [6.50] 2015 BMW M4 [6.20]	We just got a few of these back in stock today, Mishimoto has been backordered lately. __________________ Tom G. \| european auto source (eas) email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22 GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
	Appreciate 1 rk95379.50 Quote

09-29-2023, 12:30 AM	#11
DarkNight707 First Lieutenant 497 Rep 358 Posts Drives: BMW G87 (2024),BMW E82(2009)-s Join Date: Oct 2022 Location: Southern California iTrader: (0)	How much an installation like this may cost?
	Appreciate 0 Quote

09-29-2023, 12:13 PM	#15
apez Lieutenant 650 Rep 430 Posts Drives: BMW G87 M2, F25 X3 Join Date: May 2022 Location: VERMONT iTrader: (1) Garage List 2024 BMW M2 [7.62] 2015 BMW X3 [7.25]	Maybe I am way off here... but seems like it is a direct replacement for the factory plastic under tray. If you have a jack and stands probably pretty easy and quick to DIY. If you don't it should be even easier for a shop, especially if your car is going on a lift.
	Appreciate 1 CadolinaRipr319.00 Quote

09-29-2023, 01:11 PM	#17
GregW / Oregon Commander-In-Chief 2130 Rep 8,927 Posts Drives: 2023 M2 Coupe, 2020 GLE 450 Join Date: Nov 2005 Location: Lake Oswego, OR iTrader: (3) Garage List 2023 M2 Coupe [9.83] 2020 Mercedes GLE 450 [7.25]	Mishimoto skid plate Seems everyone has them for $449.95 right now. Mishimoto offers free economy shipping: https://www.mishimoto.com/bmw-g80-m3...late-2021.html __________________ Greg Lake Oswego, Oregon, USA 2023 M2 Coupe - Brooklyn Grey/Cognac/CF, 6MT; 2020 MB GLE 450
	Appreciate 1 DarkNight707497.00 Quote

09-29-2023, 05:22 PM	#21
DarkNight707 First Lieutenant 497 Rep 358 Posts Drives: BMW G87 (2024),BMW E82(2009)-s Join Date: Oct 2022 Location: Southern California iTrader: (0)	Yeah, it varies but thanks for all the details everyone! I just heard from my CA, the car is getting to the dealership next week… so making a decison soon. Just wish those Zunsport screen were available too!
	Appreciate 1 Fastfwd214.50 Quote