[taz2ko0]

BIMMERPOST / Classifieds

Asking Price:

USD 87.00

Location:

✓ Will Ship

Item Interest

$87 Shipped via Paypal.

I made a DP fix for my e92. I know they go for $99.99 but I think $87 shipped via insured priority mail (USPS) for the same thing should be good.
PM me if you are interested.

This item fits the following BMWs:

2006–2010 E90/E91/E92/E93 335i
2011–2013 E92/E93 335is
2007–2010 E60/E61 535i
2007–2010 E82/E88 135i
2011 E82 1 Series M Coupe
2009–2016 E89 Z4 sDrive35i
2011–2016 E89 Z4 sDrive35is

1 week and no SES light. Any takers are welcomed. I can make more of them on demand.
Thanks

[taz2ko0]

BUMP! So far so good. I will keep you posted.

[taz2ko0]

2 days and no SES light. So far the sitting I am using is good ~630 ohms. I will make few and take pics if anyone is interested

[Hannibal4444]

n55?

[taz2ko0]

Originally Posted by Hannibal4444

n55?

It should be good for the following:
This item fits the following BMWs:
2007-2010 E90/E91/E92/E93 BMW 335i
2011-2012 E92 BMW 335is
2008-2010 E82 BMW 135i

[taz2ko0]

Day 3 and no ses!! Let me know if anyone is interested

[taz2ko0]

Day 4 with no SES light. I have one for sale right now. 40 shipped.

[Maniac0908]

if it goes a week with no error ill take one. is there a way to check readiness? through inpa or something? thanks

[taz2ko0]

Originally Posted by Maniac0908

if it goes a week with no error ill take one. is there a way to check readiness? through inpa or something? thanks

I have not tried I would have to look into it. I have inpa and a bav technic cable. So far everything is good. I could figure out the voltage drop.

[Maniac0908]

Originally Posted by taz2ko0

I have not tried I would have to look into it. I have inpa and a bav technic cable. So far everything is good. I could figure out the voltage drop.

ya man find out. im sure if you can prove it works people will buy. i will

[taz2ko0]

Day 5 and no SES light. At this point I will try to voltage drop numbers but I believe the setting and setup is sound. Any takers are welcomed. I have one for sale and I can make on demand.
Thanks

[taz2ko0]

1 week and no SES light. Any takers are welcomed. I have one for sale and I can make on demand.
Thanks

[Manbearpig]

So how did you actually install these?

[taz2ko0]

Originally Posted by Manbearpig

So how did you actually install these?

View post on imgur.com

Follow the link. These were the instructions I used.

[shadow191]

Do a search for BMS DP Fix installation. The .pdf is saved out there somewhere. It's the one I used to install mine even thought it was a different brand (wiring is the same in all).

But 1 week may not prove anything unless all monitors are ready. I drove around with mine for over a week and it never threw a light but didn't set readiness in all monitors either. Then it threw a code for an O2 sensor and I had to fix it and start over. The 2nd time it set readiness and I passed emissions. Any cheap $20 code scanner can let you know readiness, it's what I use.

Originally Posted by Manbearpig

So how did you actually install these?

[taz2ko0]

Originally Posted by shadow191

Do a search for BMS DP Fix installation. The .pdf is saved out there somewhere. It's the one I used to install mine even thought it was a different brand (wiring is the same in all).

But 1 week may not prove anything unless all monitors are ready. I drove around with mine for over a week and it never threw a light but didn't set readiness in all monitors either. Then it threw a code for an O2 sensor and I had to fix it and start over. The 2nd time it set readiness and I passed emissions. Any cheap $20 code scanner can let you know readiness, it's what I use.

I have scanned it everyday with my bt scanner I have not gotten any codes. But I will keep checking. Thanks for the info.

[puppydax]

Originally Posted by shadow191

Do a search for BMS DP Fix installation. The .pdf is saved out there somewhere. It's the one I used to install mine even thought it was a different brand (wiring is the same in all).

But 1 week may not prove anything unless all monitors are ready. I drove around with mine for over a week and it never threw a light but didn't set readiness in all monitors either. Then it threw a code for an O2 sensor and I had to fix it and start over. The 2nd time it set readiness and I passed emissions. Any cheap $20 code scanner can let you know readiness, it's what I use.

This. Do the readiness monitors show "ready" or "incomplete"? I need one of these to pass emissions in CA, but the catalyst has to show as being ready.

[shadow191]

If you've set readiness in all the monitors and aren't throwing codes then it works.

Originally Posted by taz2ko0

I have scanned it everyday with my bt scanner I have not gotten any codes. But I will keep checking. Thanks for the info.

[taz2ko0]

Originally Posted by puppydax

This. Do the readiness monitors show "ready" or "incomplete"? I need one of these to pass emissions in CA, but the catalyst has to show as being ready.

I will post a screen shot of my BT scanner results.

[taz2ko0]

So far so good. Any takers? If it dont work I you have 30 days to return it. Lmk. I will post the BT scanner Results this weekend

[feuer]

Originally Posted by taz2ko0

So far so good. Any takers? If it dont work I you have 30 days to return it. Lmk. I will post the BT scanner Results this weekend

Is this the type you can turn on and off so it can stay installed vs those that require to be removed?

[taz2ko0]

This is wired just like the BMS one. There is no or off switch. You just need to set the POT until the SES light does not come on. I found out that around 630~650 ohms works best. I will send it set at ~650 ohms to make it easier.