[Cerealkiller]

Is your collision sensor going off with the EOS? I’ve tried 3 different times but it keeps going off when I reverse.

[hamenfirstblood]

Originally Posted by Cerealkiller

Is your collision sensor going off with the EOS? I’ve tried 3 different times but it keeps going off when I reverse.

my sensors don't go off due to it.

[Cerealkiller]

So it looks like I have to mount the plate higher than the sensor...

[PP3121]

Looks as if the EOS mount sits in a different position to the Cravenspeed version. I have not had any sensor issues with the Cravenspeed mount.

[Mike_H_]

Originally Posted by PP3121

Looks as if the EOS mount sits in a different position to the Cravenspeed version. I have not had any sensor issues with the Cravenspeed mount.

With the EOS, you can mount the plate higher, lower, to the left, to the right

[DriftKing860]

I put my EOS highest possible setting. The screw would be lowest right

[J-RO]

Originally Posted by ZeusHorkios

Bumping this thread to see if MY22 owners have found any other alternatives?

Those who have used slybrackets, any cooling issues when using these brackets on the bottom grille?

Carbonio now has one:


https://carbonio.com/collections/bmw...se-plate-mount