|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
vibration at idle
|
|
10-31-2024, 11:04 PM | #1 |
Registered
0
Rep 7
Posts |
vibration at idle
I’ve been noticing a vibration in my 328i E90 (N51 engine) for a while, and it seems to be gradually worsening. The vibration is only present when the car is idling—whether I’m at a stoplight or in park—and it disappears as soon as I start driving or increase the RPMs.
I suspect it might be related to the motor mounts or transmission mount, but I haven’t done any inspections or diagnostics yet. What could be causing this, and what’s the best approach to identify and fix the issue? |
11-01-2024, 04:36 AM | #2 |
Brigadier General
638
Rep 3,212
Posts
Drives: E92 325i MSport Coupe
Join Date: Apr 2012
Location: UK South East
|
If it's motor mounts, open the hood and watch the behavior of the engine when you blip the throttle. If the mounts are shot, the engine will rock side to side.
__________________
E92 pre-LCI 325i - Ohlins R&T; H&R spacers; M3 strut brace; Swift thrust sheets; 3 x chassis braces; diff brace; N53 V-brace; 034 subframe inserts; BMS clutch stop; BMS CDV; RE g/box mounts; Delrin shift bushes; Saikoumichi OCC; Cyba scoops; BMW Perf Exhaust; HEL s/steel brake hoses; M3 rear spoiler; Recaro Sportster CSs; M3 white dash LEDs; LED Angels; LED side repeaters; BMW Perf black grille; CSL reps; SSDD carbon diffuser; Monster Wrap black roof/clear front
|
Appreciate
1
bigxO0.00 |
11-01-2024, 08:00 PM | #3 |
Registered
0
Rep 7
Posts |
I’ll give that a try and see if there’s any movement when I blip the throttle. If the engine does rock side to side, is there a specific way to check which mount (or mounts) might be the culprit? I might just end up replacing all the engine mounts and the transmission mount since I’ll already be in there, if that’s the issue. Also, any recommendations on replacement mounts? I want to make sure I get ones that will last or be better.
|
Appreciate
0
|
11-02-2024, 05:19 AM | #4 |
Brigadier General
638
Rep 3,212
Posts
Drives: E92 325i MSport Coupe
Join Date: Apr 2012
Location: UK South East
|
I'd always replace both engine mounts if I were you. I can recommend the transmission mounts from Rogue Engineering (at least for manual).
https://www.rogueengineering.com/Rog...air_p_137.html
__________________
E92 pre-LCI 325i - Ohlins R&T; H&R spacers; M3 strut brace; Swift thrust sheets; 3 x chassis braces; diff brace; N53 V-brace; 034 subframe inserts; BMS clutch stop; BMS CDV; RE g/box mounts; Delrin shift bushes; Saikoumichi OCC; Cyba scoops; BMW Perf Exhaust; HEL s/steel brake hoses; M3 rear spoiler; Recaro Sportster CSs; M3 white dash LEDs; LED Angels; LED side repeaters; BMW Perf black grille; CSL reps; SSDD carbon diffuser; Monster Wrap black roof/clear front
|
Appreciate
0
|
Bookmarks |
|
|