|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
UUC BMW E90 / E92 328xi & 335xi (Xi/Xdrive) Front & Rear Sway Bars| NOW SHIPPING
|
|
01-12-2017, 09:24 AM | #1 |
3458
Rep 79,211
Posts
Drives: C6 Z06, 09 335i, 10 335xi
Join Date: Dec 2008
Location: www.TopGearSolutions.com
|
UUC BMW E90 / E92 328xi & 335xi (Xi/Xdrive) Front & Rear Sway Bars| NOW SHIPPING
UUC Tubular Sway Bar Upgrade for BMW E90 E92 NEW! Lightweight tubular design has the same functionality as our solid swaybars but saves approximately 15lbs of weight. Front and rear bars are available separately - special discounted pricing when you buy both. Suitable for 335i, 330i, 328i, 325i models (2WD only and X Drive) Now you can have the same swaybar technology used in the official BMW 335d racecars! UUC is proud to have been the manufacturer of swaybars for the 335d racecars campaigned by BMW USA. What's a Sway Bar? An anti-sway bar is a suspension component designed to reduce body roll. It keeps your vehicle flatter in the turns by transferring the pressure exerted on the outboard wheels and applying opposite pressure on the inboard wheels. In this way weight is more evenly applied to all four wheels, helping the vehicle stay more level with the road. Technical details As an example of our attention to detail, the E90 3-series Sway Barbarians is a very unique set of bars. Features include: - Revised contouring for maximum clearance even with extremely lowered cars. - Precision-cut adjustable ends. - Urethane bushings and lubrication included. Sizes TUBULAR DIAMETER SOLID EQUIVALENT FRONT 30mm 27mm REAR 25mm 23.8mm Superior Materials We put our bars through this extensive process to insure that the final product will be the strongest, most durable bar on the market, and that it will be the most resistant to form alteration. Adjustability Our rear E90 Xi swaybar uses a multi-hole system on the rear bars which allows for fine tuning of the bar for whatever desired effect, without sacrificing body roll. Front Bar: non-adjustable Rear Bar: 2 hole adjustment Positive-placement rear bushing stops To keep the tight-tolerance rear bar from shifting side-to-side, they are fitted with postiive-placement stops, rings around the bar that hold the bar in place against the bushings. Powdercoated Finish After the bars are CNC mandrel bent and the ends are forged and punched, a silver powdercoat is applied for a smooth, long lasting finish in a similar process to how factory bars are coated. This smooth finish allows the bars, when properly installed with polyurethane bushings and grease, for long term performance with minimal maintenance. Polyurethane Bushings and steel brackets The SwayBarbarians include replacement polyurethane bushings which are built to "aircraft spec" (literally - our urethane fabrication facility uses the same material and production guidelines as they do for Boeing). This results in a durable bushing that will not disintegrate and has longer re-lubrication intervals for long lasting, quiet results. Be sure to use generous amounts of grease to ensure maximum performance from your SwayBarbarians! Steel brackets are included which replace the weaker original equipment aluminum brackets. Order Here RWD: https://topgearsolutions.com/uuc-tub...335i-rwd-only/ Order Here X Drive: https://topgearsolutions.com/uuc-tub...e-328xi-335xi/ Last edited by Jeff@TopGearSolutions; 03-28-2019 at 09:45 AM.. |
|
01-12-2017, 11:04 AM | #3 |
Second Lieutenant
29
Rep 267
Posts |
Bought! Got the front and rears with front endlinks.
|
Appreciate
1
Jeff@TopGearSolutions3457.50 |
01-16-2017, 03:20 PM | #4 |
3458
Rep 79,211
Posts
Drives: C6 Z06, 09 335i, 10 335xi
Join Date: Dec 2008
Location: www.TopGearSolutions.com
|
They are recommended, especially on high mileage vehicles and/or lowered vehicles. Also with the limited production of these end links and sway bars, we recommend them as the stock will eventually fail.
|
Appreciate
0
|
01-19-2017, 06:06 PM | #6 |
3458
Rep 79,211
Posts
Drives: C6 Z06, 09 335i, 10 335xi
Join Date: Dec 2008
Location: www.TopGearSolutions.com
|
More orders processed. We had someone else ask if we are still taking orders and the answer is yes!
Get you orders in ASAP. These ship on a first come first serve basis while supplies last. There are about 25 sets on order and we have about half of them pre-sold already. |
Appreciate
0
|
02-04-2017, 01:23 PM | #10 |
Second Lieutenant
49
Rep 206
Posts
Drives: '21 X4 M40i
Join Date: Feb 2012
Location: NJ
|
Bump
|
Appreciate
0
|
Bookmarks |
|
|