|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Tons of codes, DSC Light + Brake Light + SES Light. Bad sensor?
|
|
11-09-2017, 01:37 PM | #1 |
Lieutenant
233
Rep 566
Posts |
Tons of codes, DSC Light + Brake Light + SES Light. Bad sensor?
I have INPA and all the other tools, if I should run diags let me know. Otherwise, any idea on these codes? Happened last night driving home from work. Occurred again today coming back from lunch. Car is lowered on Eibachs if that matters, I found some info on my searches with people throwing codes after lowering their car but mine has been this way for a while.
Battery is new. Alternator is also new. My car is an 09 335i rwd, 79k miles 2DC3 - DME: Monitoring, terminal 15. CD94 - Message error (ambient temperature/ relative time, 0x310), DME receiver, instrument panel transmitter. CD95 - Message (operation, cruise control/ACC, 0x194) faulty, receiver DME, transmitter DSC/ SZL/LWS/ ACC CD98 - Message error (DSC torque request, OxB6), DME receiver, AHM/ DSC transmitter. CD9C - Message (speed, 0x1A0) faulty, receiver DME, transmitter DSC CDAO - Message error (terminal status, 0x130), DME receiver, CAS transmitter. CDA1 - Message (steering wheel angle, 0xC4) faulty, receiver DME, transmitter DSC CDA5 - Message (status, DSC, 0x19E) faulty, receiver DME, transmitter DSC CDA8 - Message (status, instrument panel, 0x1B4) faulty, receiver DME, transmitter KOMBI CDAD - Message error (request, wheel torque, drive train, OxBF), DME receiver, DSC/ LDM transmitter. |
Bookmarks |
|
|