[lvfb]

SOLVED!!!!

Changed out srs module with the one in my parts e88. didnt need to code it as it auto filled out the vin and what not.

also had to replace the roll over module, the driver side seat belt (it was scrunched up on the part that is under the buckle and looks like an accordion), and the yellow wire that connects to the driver side seat belt had come undone giving off a "seat belt limiter" code

================================================== ================================


Hi all,
I am having a bunch of yellow and red boxes pop up when i run ISTA's vehicle check where it shows you the "tree" of all your modules...

any one have any info on how to read this or what i need to do to make the yellow and red turn to green?


I also have a cable error issue with inpa [updated spdaten file to v68 using bmw code tools] where whenever i try to click on the airbag or seat options i get the error seen in the picture

View post on imgur.com

[ZiksBH]

To me, it looks like the car had a major accident. Red in ISTA means that the program cannot communicate with the module. It's dead or the OBD cable is bad. Did you try to run INPA?

[lvfb]

yea inpa works through most of the options other than airbag, driver seat and passenger seat

[ZiksBH]

Was the battery dead? Was the battery replaced? Check all the ground straps in the car. Try to clear all the codes if you can. Maybe that the optical cable is damaged.
With so many errors it could be anything but first, check the power source.

[lvfb]

I just figured out my multimedia buttons on my steering wheel was due to a bad clock spring. ordered a new one and going to see if that helps at all

https://www.amazon.com/Veizn-2006-20...=2009+BMW+128i

View post on imgur.com