[Click_ID]

     Featured on BIMMERPOST.com

No fluff here it is:
23-G87 BMW M2
HEA spec-Manual ( Not wasting anyone's time listing manufacturer's features/equipment)

Appearance (Installed Currently)
PPF+Cermamic+tint
IND reflector delete
IND black M2 badge
Alpha-N carbon Grill
AutoID TRE Carbon Splitter
AutoID TRE Carbon Splitters
AutoID TRE Carbon Rear spoiler ID1
VT Forged Wheels 19x9.5+8/20x11+5


Performance;
Femto
Madd catless downpipes
BM3 Flex Fuel kit
BM2 Stage 2 E 50 Map
Rouge Engineering Short Shifter Kit
Rouge Engineering Rear Shifter Bushing Mount Replacement
KW Height adjustable Springs.
*315 Rears*
Steve's Performance Shop's Cold Air Intakes! ( They scream sweet intake and turbo noises to me!)(whitelisted product used by other larger BMW aftermarket suppliers.....bms* cough)
Steve's Performance Shop's Single Midpipe.
PSI Brake Pads

Pointing out the not-so-obvious so the trolls can dig for something else. My front and rear tires don't match, and my matching Michelin front's (285's) didn't arrive on time. They'll get installed tomorrow after I dyno this thing. I'll save the comment after this one for that post instead of creating an entire new thread.

Thank you for reading. I have been excited to share my build for a while.























Photos courtesy of both Ryan Couch (rouchh) & Stafford Media.

[Click_ID]

Place Holder for Dyno Post ( Also, mods if you would move this to "Builds" I mucked up here, send help I need an adult)

[M2siast]

Hey! Your front tires don’t match your rears!

LOL nice car man. How did it run?

[Ricochet48]

Love those wheels!

[mzimand]

Do you have springs and spacers?
The stance looks great

[Click_ID]

Originally Posted by mzimand

Do you have springs and spacers?
The stance looks great

Wheels take care of the fitment offset wise, really the perks of going custom. I am running KW Height adjustable spring, tried HR's SS lowering springs and it wasn't a good decision. Happy with my KW's

[mzimand]

Originally Posted by Click_ID

Wheels take care of the fitment offset wise, really the perks of going custom. I am running KW Height adjustable spring, tried HR's SS lowering springs and it wasn't a good decision. Happy with my KW's

That was what I was hoping to hear. I hate using spacers.
Your fitment looks perfect. I want to duplicate it on my car
Can you confirm the wheel sizes.

The stock fronts are 9.5J x 19” ET20mm with 275/35-19 tyres
If you are only going with a +8 does that mean the ET is 8mm or 28mm(20 stock +8mm)?

*I am not an expert in this subject so if my question is dumb I apologize)

Didi

[rcouchh]

Originally Posted by mzimand

That was what I was hoping to hear. I hate using spacers.
Your fitment looks perfect. I want to duplicate it on my car
Can you confirm the wheel sizes.

The stock fronts are 9.5J x 19” ET20mm with 275/35-19 tyres
If you are only going with a +8 does that mean the ET is 8mm or 28mm(20 stock +8mm)?

*I am not an expert in this subject so if my question is dumb I apologize)

Didi

He wrote his offsets backwards.

Fronts are 19x9.5 +5, the rears are 20x11 +8.

In this case with the stock wheels that's the equivalent of running a 15mm spacer up front (going from +20 to +5). I'm doing the same wheels but 19x10 +11 front, which is the same fitment on the fender size. Each half inch added to wheel width is like subtracting 6 from the offset. 1"=12mm, 6mm inside, 6mm fender side.

Rears go from 20x10.5 +20 stocks to these being 20x11 +8. So -6 for the 0.5" width increase, and a -12 offset decrease, bringing it to the equivalent of running an 18mm spacer in the rear w/ stocks.

To summarize, his fitment is like running +15F, +18R spacers with stock wheels.

Hope this makes sense!

[Click_ID]

Dude you're a nerd and it's awesome.
You are a beauty! Cannot wait to see how much better your build looks than mine! We racing at Mpact next year?.... Maybe Chris will let me have a run against Alpha-Tail.

Originally Posted by rcouchh

He wrote his offsets backwards.

Fronts are 19x9.5 +5, the rears are 20x11 +8.

In this case with the stock wheels that's the equivalent of running a 15mm spacer up front (going from +20 to +5). I'm doing the same wheels but 19x10 +11 front, which is the same fitment on the fender size. Each half inch added to wheel width is like subtracting 6 from the offset. 1"=12mm, 6mm inside, 6mm fender side.

Rears go from 20x10.5 +20 stocks to these being 20x11 +8. So -6 for the 0.5" width increase, and a -12 offset decrease, bringing it to the equivalent of running an 18mm spacer in the rear w/ stocks.

To summarize, his fitment is like running +15F, +18R spacers with stock wheels.

Hope this makes sense!

[rcouchh]

Originally Posted by Click_ID

Dude you're a nerd and it's awesome.
You are a beauty! Cannot wait to see how much better your build looks than mine! We racing at Mpact next year?.... Maybe Chris will let me have a run against Alpha-Tail.

Happens when you have way too much free time on your hands

C'mon don't say that.. but there is gonna be some serious G87 competition amongst the boys.

Will def be there ready to rip

[Click_ID]

Originally Posted by rcouchh

Happens when you have way too much free time on your hands

C'mon don't say that.. but there is gonna be some serious G87 competition amongst the boys.

Will def be there ready to rip

Going to awesome to bully some G80/82 owners for once.

[mzimand]

Originally Posted by rcouchh

He wrote his offsets backwards.

Fronts are 19x9.5 +5, the rears are 20x11 +8.

In this case with the stock wheels that's the equivalent of running a 15mm spacer up front (going from +20 to +5). I'm doing the same wheels but 19x10 +11 front, which is the same fitment on the fender size. Each half inch added to wheel width is like subtracting 6 from the offset. 1"=12mm, 6mm inside, 6mm fender side.

Rears go from 20x10.5 +20 stocks to these being 20x11 +8. So -6 for the 0.5" width increase, and a -12 offset decrease, bringing it to the equivalent of running an 18mm spacer in the rear w/ stocks.

To summarize, his fitment is like running +15F, +18R spacers with stock wheels.

Hope this makes sense!

It makes perfect sense. Well written and very clear. Thanks

[Jack@AUTOID]

Originally Posted by Click_ID

No fluff here it is:
23-G87 BMW M2
HEA spec-Manual ( Not wasting anyone's time listing manufacturer's features/equipment)

Appearance (Installed Currently)
PPF+Cermamic+tint
IND reflector delete
IND black M2 badge
Alpha-N carbon Grill
AutoID TRE Carbon Splitter
AutoID TRE Carbon Splitters
AutoID TRE Carbon Rear spoiler ID1
VT Forged Wheels 19x9.5+8/20x11+5


Performance;
Femto
Madd catless downpipes
BM3 Flex Fuel kit
BM2 Stage 2 E 50 Map
Rouge Engineering Short Shifter Kit
Rouge Engineering Rear Shifter Bushing Mount Replacement
KW Height adjustable Springs.
*315 Rears*
Steve's Performance Shop's Cold Air Intakes! ( They scream sweet intake and turbo noises to me!)(whitelisted product used by other larger BMW aftermarket suppliers.....bms* cough)
Steve's Performance Shop's Single Midpipe.
PSI Brake Pads

Pointing out the not-so-obvious so the trolls can dig for something else. My front and rear tires don't match, and my matching Michelin front's (285's) didn't arrive on time. They'll get installed tomorrow after I dyno this thing. I'll save the comment after this one for that post instead of creating an entire new thread.

Thank you for reading. I have been excited to share my build for a while.























Photos courtesy of both Ryan Couch (rouchh) & Stafford Media.

What a build dude. The wheel specs are perfect!! Think I may be stealing those tyre & wheel sizes!!

[AndyVTForged]

Setup came out incredible, and so did the photoshoot!

[ourlee]

Originally Posted by mzimand

That was what I was hoping to hear. I hate using spacers.
Your fitment looks perfect. I want to duplicate it on my car
Can you confirm the wheel sizes.

The stock fronts are 9.5J x 19” ET20mm with 275/35-19 tyres
If you are only going with a +8 does that mean the ET is 8mm or 28mm(20 stock +8mm)?

*I am not an expert in this subject so if my question is dumb I apologize)

Didi

Just in case rc is unavailable, study here:
https://www.willtheyfit.com/index.ph...=10&offset2=20