|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Pax Side Mirror Stop Working Help!
|
|
10-09-2024, 02:55 AM | #1 |
Private
4
Rep 61
Posts |
Pax Side Mirror Stop Working Help!
My e90 07 Pax side mirror stopped working getting a 9cc4 error, and (communication with mirror was disturbed)D904, I checked all the wires and even swapped mirrors, this same mirror will work on drivers driver-side plug; so I know it works, This started about 6 months ago, when I approached my car the mirror was folded outward and wouldn't align. I left it alone
Driver side works and folds Check fuses, they are both fine Swapped mirrors nothing will work on the pax side Check 12 v power is going to mirror wire through the door panel Swapped Master switch Took the door apart looking for frayed wires nothing.. In Inpa when I hit the window switch to the right ( for the pax side ) both indicators turn on for both sides, instead of the passenger side only How does Kcan stop the function of the mirror,? I searched forums and still can't figure this out. Is there a shirt circuit reset for this or anything? Any help would be appreciated! |
Bookmarks |
|
|