G87 dimension questions, jack point spread?

BMW DIY Guy · 08-18-2023, 10:14 AM

Featured on BIMMERPOST.com

Hey yall

I am trying to figure out the distance between side jack points on the G87 and cannot seem to find ANY documentation whatsoever on that.

I have found the BMW site with dimensions, showing vehicle length (4580mm) and wheel clearance (2747mm) but no jack point spread.

I am trying very hard to figure out if the Quickjack 6000 ELX (which is just barely long enough for the G80s) will also fit the G87 as well. My 7000TLX work but are about 6 inches too short for the other G80s.

I sold my 5000 for the 7000 only to find it doesnt fit the new M3s and M4s lengthwise which drives me insane. If I sell the 7000 for the longer 6000, I need to make sure it fits EVERYTHING.

Thanks!

aerobod · 08-18-2023, 10:35 AM

1670mm centre to centre, or 1740mm from front edge of front block to back edge of back block.

BMW DIY Guy · 08-18-2023, 10:41 AM

Quote:

Originally Posted by aerobod

1670mm centre to centre, or 1740mm from front edge of front block to back edge of back block.

SWEET.. so if I read that right, that is 65.7 inches, or well within the 53" (min) – 76" (max) range of the 6000 ELX. That means the ELX should work for both the G87 and the much longer G80s... FANTASTIC!

baron95 · 08-18-2023, 07:59 PM

Quote:

Originally Posted by aerobod

1670mm centre to centre, or 1740mm from front edge of front block to back edge of back block.

Just love it when someone answers the question precisely and completely.

Well done sir. I too am considering buying a 6000.

DCC · 08-18-2023, 08:38 PM

Quote:

Originally Posted by aerobod

1670mm centre to centre, or 1740mm from front edge of front block to back edge of back block.

Approx 66” … and it looks like my 7000 won’t work either

Guess it’s 4 jack stands for me or I have to try to use the quick jacks in a 90 degree fashion.

BMW DIY Guy · 08-19-2023, 08:20 AM

Quote:

Originally Posted by DCC

Approx 66” … and it looks like my 7000 won’t work either

Guess it’s 4 jack stands for me or I have to try to use the quick jacks in a 90 degree fashion.

The 7000 TLX will work but guessing you have the TL?

DCC · 08-19-2023, 08:25 AM

I just measured the frame extensions I have and they are at 66” max

This is good news….

turo · 08-19-2023, 12:15 PM

Aww damn, that means my trusty ol' 5000 SLX won't work!

I could get the extensions, but I'm not sure if the added height would be a problem. Ugh, I guess I'll wait for my car to arrive then see.

ZPD · 08-19-2023, 07:42 PM

Yep I learned today that my 7000 TL won't work. Grrrrr.
I think that I will sell it because even with extensions it won't work on my G16.

DailyDownshift · 08-19-2023, 11:08 PM

Sold my 5000 a few months back for this exact reason.. 6000ELX finally arrived at my door a few days ago!

billspreston · 08-25-2023, 01:59 PM

Has anyone used a 6000 ELX with a G87 yet? When overlaying the dimensions of the QuickJack frame onto the G87 spec it looks like a pretty close fit. While it does seem like the extended frame will just fit between the tires and hit the jack points, it would be great to get some first hand confirmation.

BMW DIY Guy · 08-25-2023, 02:06 PM

Quote:

Originally Posted by billspreston

Has anyone used a 6000 ELX with a G87 yet? When overlaying the dimensions of the QuickJack frame onto the G87 spec it looks like a pretty close fit. While it does seem like the extended frame will just fit between the tires and hit the jack points, it would be great to get some first hand confirmation.

I would love to see this as well.. probably will sell my 7000s for the 6000 if we can confirm it fits.

billspreston · 08-28-2023, 03:46 PM

Have convinced myself via the wonders of CAD that it fits with a few inches to spare. Planning to purchase the 6000ELX this week as HD currently has it on sale, but I won't have a car to verify for another 4+ weeks.

dub_nasty · 08-31-2023, 09:14 PM

god dammit, I should have read this thread. Just spent all this time bleeding and setting up my 5000TL...... thankfully costco is no hassle returns and ill get the 6000 from HD. (If you have amex points, get the HD giftcards woot woot)

DCC · 08-31-2023, 10:51 PM

Quote:

Originally Posted by dub_nasty

god dammit, I should have read this thread. Just spent all this time bleeding and setting up my 5000TL...... thankfully costco is no hassle returns and ill get the 6000 from HD. (If you have amex points, get the HD giftcards woot woot)

Do you have the extension rails for the 5000?
They might be long enough that way, but you will lose some height clearance.

dub_nasty · 09-01-2023, 09:30 PM

Quote:

Originally Posted by DCC

Do you have the extension rails for the 5000?
They might be long enough that way, but you will lose some height clearance.

I do not, but with Costco taking returns no questions asked I just returned and ordered the 6000

DailyDownshift · 09-01-2023, 09:32 PM

Quote:

Originally Posted by DCC

Do you have the extension rails for the 5000?
They might be long enough that way, but you will lose some height clearance.

Extension rails do not make it long enough sadly, only 6000 fits g87.

billspreston · 09-03-2023, 02:08 AM

Quote:

Originally Posted by dub_nasty

(If you have amex points, get the HD giftcards woot woot)

Duuuude thank you – that Amex gift card offer made the deal even sweeter.

Snipetracks · 09-16-2023, 12:40 PM

I can confirm Quickjack 6000ELX works for the G87.

billspreston · 09-16-2023, 05:32 PM

That's a beautiful sight. My 6000 got delivered this week, looking forward to using it.

M2siast · 09-16-2023, 05:36 PM

Quote:

Originally Posted by Snipetracks

I can confirm Quickjack 6000ELX works for the G87.

Are those shipping blocks?

Snipetracks · 09-16-2023, 07:54 PM

Quote:

Originally Posted by M2siast

Are those shipping blocks?

That's a good question. I need to take a closer look at that.

08-18-2023, 10:14 AM	#1
BMW DIY Guy Brigadier General 3079 Rep 3,029 Posts Drives: 2019 M2 Competition Join Date: Jan 2017 Location: Maple Valley WA iTrader: (1) Garage List 2024 BMW M2 [9.80] 2017 BMW X1 [10.00] 2001 BMW X5 [10.00]	G87 dimension questions, jack point spread? Featured on BIMMERPOST.com Hey yall I am trying to figure out the distance between side jack points on the G87 and cannot seem to find ANY documentation whatsoever on that. I have found the BMW site with dimensions, showing vehicle length (4580mm) and wheel clearance (2747mm) but no jack point spread. I am trying very hard to figure out if the Quickjack 6000 ELX (which is just barely long enough for the G80s) will also fit the G87 as well. My 7000TLX work but are about 6 inches too short for the other G80s. I sold my 5000 for the 7000 only to find it doesnt fit the new M3s and M4s lengthwise which drives me insane. If I sell the 7000 for the longer 6000, I need to make sure it fits EVERYTHING. Thanks! __________________ Check out my BMW DIY Channel on YouTube! E, F and G series projects from Active Autowerke, Bimmertech, Kies Motorsports, AvinUSA, Karbonius Composites and more! YouTube BMW DIY Guy 'Nimona' G87 M2 Build Thread 'Lillith' F87 M2 Competition Build Thread
	Appreciate 0 Tweet Quote

08-18-2023, 10:35 AM	#2
aerobod Car Geek 3639 Rep 3,601 Posts Drives: Caterham R500, M2-G87, Macan S Join Date: Mar 2008 Location: Calgary iTrader: (0)	1670mm centre to centre, or 1740mm from front edge of front block to back edge of back block.
	Appreciate 9 M2siast5900.00 Tag18265.00 sl0m01296.00 baron951703.50 JoeG60.00 Ojala6.00 RemoWilliams84413.00 Bearded-Driver876.50 turo162.50 Quote

08-19-2023, 08:25 AM	#7
DCC Major 312 Rep 1,041 Posts Drives: Join Date: Jan 2008 Location: Texas iTrader: (0)	I just measured the frame extensions I have and they are at 66” max This is good news…. __________________ 2024 M2, 2024 CGT4RS, 2020 M2 CS, 2021 Macan GTS, 2017 Cayenne S, 2002 M Coupe
	Appreciate 1 BMW DIY Guy3078.50 Quote

08-19-2023, 12:15 PM	#8
turo Lieutenant 163 Rep 467 Posts Drives: Yes Join Date: Jul 2011 Location: North VA iTrader: (2) Garage List 2011 BMW 335i [8.40] 2024 BMW M2 [9.00] 2018 BMW 340i XDrive [10.00]	Aww damn, that means my trusty ol' 5000 SLX won't work! I could get the extensions, but I'm not sure if the added height would be a problem. Ugh, I guess I'll wait for my car to arrive then see.
	Appreciate 0 Quote

08-19-2023, 07:42 PM	#9
ZPD Second Lieutenant 441 Rep 263 Posts Drives: 2022 M850i GC, 2023 G87 Join Date: Dec 2022 Location: Texas iTrader: (0)	Yep I learned today that my 7000 TL won't work. Grrrrr. I think that I will sell it because even with extensions it won't work on my G16.
	Appreciate 0 Quote

08-19-2023, 11:08 PM	#10
DailyDownshift Battle Tactician 453 Rep 306 Posts Drives: TR G87 Join Date: Jan 2021 Location: Toronto, Canada iTrader: (0)	Sold my 5000 a few months back for this exact reason.. 6000ELX finally arrived at my door a few days ago! __________________ YouTube & IG: @Dailydownshift Current: TR G87 Stick Previous: LBB 16' M2 \| 20' Corvette C8 \| AW 18' M2 \| AW 20' M2c \|
	Appreciate 1 BMW DIY Guy3078.50 Quote

08-25-2023, 01:59 PM	#11
billspreston Colonel 336 Rep 2,253 Posts Drives: G87 Join Date: Jul 2005 Location: CA iTrader: (13)	Has anyone used a 6000 ELX with a G87 yet? When overlaying the dimensions of the QuickJack frame onto the G87 spec it looks like a pretty close fit. While it does seem like the extended frame will just fit between the tires and hit the jack points, it would be great to get some first hand confirmation. Attached Images
	Appreciate 1 BMW DIY Guy3078.50 Quote

08-28-2023, 03:46 PM	#13
billspreston Colonel 336 Rep 2,253 Posts Drives: G87 Join Date: Jul 2005 Location: CA iTrader: (13)	Have convinced myself via the wonders of CAD that it fits with a few inches to spare. Planning to purchase the 6000ELX this week as HD currently has it on sale, but I won't have a car to verify for another 4+ weeks.
	Appreciate 2 BMW DIY Guy3078.50 Trogster465.00 Quote

08-31-2023, 09:14 PM	#14
dub_nasty Enlisted Member 21 Rep 46 Posts Drives: F97, G87, G20 M340ix Join Date: Aug 2023 Location: VA iTrader: (1)	god dammit, I should have read this thread. Just spent all this time bleeding and setting up my 5000TL...... thankfully costco is no hassle returns and ill get the 6000 from HD. (If you have amex points, get the HD giftcards woot woot)
	Appreciate 0 Quote

09-16-2023, 12:40 PM	#19
Snipetracks New Member 26 Rep 13 Posts Drives: 2023 BMW M2 Join Date: Jan 2021 Location: Florida iTrader: (0) Garage List 2023 BMW X5 [0.00] 2023 BMW M2 [0.00]	I can confirm Quickjack 6000ELX works for the G87. Attached Images
	Appreciate 7 Shizzel720490.00 billspreston335.50 Ravenseal2800.50 BMW DIY Guy3078.50 Bearded-Driver876.50 Kevin_The_Clean13308.50 Paco6518.00 Quote

09-16-2023, 05:32 PM	#20
billspreston Colonel 336 Rep 2,253 Posts Drives: G87 Join Date: Jul 2005 Location: CA iTrader: (13)	That's a beautiful sight. My 6000 got delivered this week, looking forward to using it.
	Appreciate 1 Kevin_The_Clean13308.50 Quote