[DutchE91]

Hello,

I was looking to retrofit the boot/trunk release button inside the car underneath the OBD port.

I found a wiring diagram that is for an E90 LCI.

According to this diagram the wiring needs to be as follows:

SWITCH PIN 1 to interior lighting.
SWITCH PIN 2 to ground.
SWITCH PIN 3 to CAS X13376 PIN 39.

I was wondering if this is the same for the E91?

And if it is, is it also possible to wire it in a way that instead of the whole boot it just opens the glass? In other words, what pin numer do I need to connect to the switch to open the glass in the boot?

I hope someone can help me with this