[HP Autosport]

In order to properly use Vorshlag camber plates, you must choose the option below to include Vorshlag upper spring perches that match your strut brand and spring type. Vorshlag camber/caster plates are designed to be compatible with 2.5”, 2.25" and 60mm “coilover” style springs, OEM (stock) style springs and all strut types. We make numerous variations of this plate and accompanying perches to work with your set-up. The Vorshlag upper perches allow us to add a sealed radial bearing that isolates the spherical bearing in the camber plate from radial turning loads of of the strut shaft during steering inputs. This is part of why our plates last the lifetime of the car!

*Compatible with 2.5", 2.25" and 60 mm coilover springs, factory springs, OEM Style Lowering springs and all struts.
*No need to change camber plates when switching from regular springs to coilovers - some companies sell you two totally different camber plates for coilover springs and factory style springs.
*Installs with basic hand tools, no chassis modifications required.
*Plates are designed specifically for BMW E82 & E87 (1 series) and E90 or E92 (3 series) chassis (except E90/E92 M3).
*Caster & Camber are independently adjustable.
*Camber is easily adjustable at the track from the engine compartment with simple (metric) hand tools. No need to reach inside the wheel well with a wrench to tighten.
*The spherical bearing used in the Vorshlag camber plate is the largest used in any BMW camber plate on the market. The result is much better durability and wear characteristics than the undersized bearings used in our competitors' plates.
*Designed for maximum suspension travel (bump travel). More than an inch more strut travel than some of our competitors' designs.
*Alloy steel bearing holder - Tough as a German Tank!
*Aluminum alloy main plate for lighter weight, engraved and fully anodized
*All components plated or anodized for maximum corrosion resistance and long life.
*Vorshlag Upper spring perches required. Coilover perches included in the basic price, but OEM style perches are extra (see "Spring Perch" drop down option menu, below).
*Maximum negative camber setting depends on caster setting, ride height, and is ultimately limited by the strut tower opening on these chassis. The E82/90/92 strut tower hole is more restrictive than previous generation BMWs. *Expect to get -2° to -3.5° max camber, depending on ride height.
*New and improved .25" thick top ring (introduced Dec 2008) for increased clearance between Vorshlag long reach M12x1.5 strut top nut to factory (faux) strut brace. Improved low profile bolt ring for more clearance when used with OEM style perches.

Available now!

Camber plates: $439
For use with OEM style springs: +$35

To order go to: http://hpashop.com/product.sc?produc...categoryId=175

[HP Autosport]

We have all popular configurations in stock....Koni, KW, Bilstein, 60mm, 65mm upper hats...etc.

[Derelict]

Price quote for full front assemblies to install on coilovers:
KW V1 on E90 328i xDrive
Thanks

[HP Autosport]

Originally Posted by Derelict

Price quote for full front assemblies to install on coilovers:
KW V1 on E90 328i xDrive
Thanks

If I haven't PM you, please let me know. It looks like you have your PM fuction turned off.

Price is $499 plus shipping.

[HP Autosport]

Vorshla plates are back in stock for most OE, Ohlins, Koni, KW and AST applications.

[HP Autosport]

Most configurations are good in stock!

[Javy]

Just got myself some St coilovers. I have an 09 335i coupe M. I am not going to track the car at all. Do i really need these plates if I plan on lowering the front 1.5 inches ?

I just want to make sure once I install the coilovers, I dont have any allignment issues nor tire wear issues.

Thanks

[Goettler_Boost]

I need camber plates for my 2007 335i e90 with KW V1 suspension.
What size/type do I need and what would they be shipped to 16002?

[HP Autosport]

Originally Posted by Javy

Just got myself some St coilovers. I have an 09 335i coupe M. I am not going to track the car at all. Do i really need these plates if I plan on lowering the front 1.5 inches ?

I just want to make sure once I install the coilovers, I dont have any allignment issues nor tire wear issues.

Thanks

If you don't track the car at all, there is no need for camber plates unless you have lack of camber or need to correct tire wear issues.

Originally Posted by Goettler_Boost

I need camber plates for my 2007 335i e90 with KW V1 suspension.
What size/type do I need and what would they be shipped to 16002?

OEM spring profile
KW strut style
Double Row Bearings

You will need to input your address to add shipping for a grand total.

[HP Autosport]

Most configurations are in stock!

[HP Autosport]

Order away!

[HP Autosport]

Most configurations are in stock!

[HP Autosport]

OE springs and struts, no problem!

KW V1, 2 or 3, no problem!

Koni single or doubles, no problem!

AST(60 or 65mm springs) and Ohlins(65mm springs) are also good in stock!

[TurboBimmer]

Do these work with a Bilstein PSS10 suspension?

[HP Autosport]

Originally Posted by Autobahn335i

Do these work with a Bilstein PSS10 suspension?

Yes, they come in the Bilstein configuration as well. PM or email us if you have further questions. we ship worldwide.

[HP Autosport]

No one knows more about Vorshlag camber plates than HPA!

[HP Autosport]

No other Vorshlag dealer has more BMW camber plates in stock than HP Autowerks and this is only what came in the other day!

[HP Autosport]

Bump!

[HP Autosport]

Bump!

[HP Autosport]

Because of higher than expected demand all E8x/E9x camber plates are on back order until Feb. 18th.

[TurboBimmer]

I've sent an email but haven't heard back yet. What are the required specs for Bilstein PSS10 coilovers (upper perch)?

[HP Autosport]

Originally Posted by Autobahn335i

I've sent an email but haven't heard back yet. What are the required specs for Bilstein PSS10 coilovers (upper perch)?

Your email was replied. Send us a PM if you still don't see the reply.