[NoSuchSol]

https://www.evasivemotorsports.com/s...upra-a90-2020/

Would something like that fit the G42? I'm under the assumption that the two side strut braces fit either car but is the distance between the two strut towers the same?

[Dinosoar]

I like it, but no way, IMO, that main bar or those brackets fit under the hood.

[dszpiro]

Dinan offers a strut bar for the G42:

https://www.dinancars.com/products/s...arts/D180-0014

It does not go across the towers so some have questioned the effectiveness of this sort of strut brace.

[desertspotter]

I bought G22 OEM parts to install it in a OEM+ modification style.

There are several posts in g20 forum
https://g20.bimmerpost.com/forums/sh....php?t=1810482

For sure it's one of the cheapest options, both strut bar, the front bar (the g20 and g42's one doesn't have threads for bolts) and all the bolts cost me about 200$ (180€).

[dszpiro]

Originally Posted by NoSuchSol

https://www.evasivemotorsports.com/s...upra-a90-2020/

Would something like that fit the G42? I'm under the assumption that the two side strut braces fit either car but is the distance between the two strut towers the same?

I have tried to carefully compare the photo from the Supra strut bar you linked to the Dinan strut bars for the G42. Aside from the mounting points and other dimensions, I don't think the Supra bar will make it over the engine cover. The photos make it look like the G42 mounting points on the tops of the towers are lower compared with the top of the engine cover than the Supra set-up. What do you think?

[MorendiSLO]

Installed OEM ones, took me 20min

[dszpiro]

Originally Posted by MorendiSLO

Installed OEM ones, took me 20min

Looks good! When you say "OEM ones", do you mean these are BMW parts? If so, do you have the part number?

Thanks!

[desertspotter]

Originally Posted by dszpiro

Looks good! When you say "OEM ones", do you mean these are BMW parts? If so, do you have the part number?

Thanks!

I did the same mod.

they are G22 OEM parts, part numbers are:

Strut : 51617456115 x2 stock are bare metal, you can paint it if you want
Bolts : 51716966566 x4

The front brace don't have the nut so you need to change also the front brace to the G22 one ( p/n: 51648491817 + required bolts 07147270121 x4 ) or use a rivnut o just a nylon nut to install it.

Also you will need to tap the strut hole (M10x1.5)

Replacing the front bar the hardware is less than 200$ and installation it's pretty straight forward.

[Ruebarb]

Originally Posted by MorendiSLO

Installed OEM ones, took me 20min

Did that include swapping the front bar with the threaded holes?

Originally Posted by desertspotter

I did the same mod.

they are G22 OEM parts, part numbers are:

Strut : 51617456115 x2 stock are bare metal, you can paint it if you want
Bolts : 51716966566 x4

The front brace don't have the nut so you need to change also the front brace to the G22 one ( p/n: 51648491817 + required bolts 07147270121 x4 ) or use a rivnut o just a nylon nut to install it.

Also you will need to tap the strut hole (M10x1.5)

Replacing the front bar the hardware is less than 200$ and installation it's pretty straight forward.

I'm looking to do the full swap of the front bar, any issues since doing this. I can't see why their would be. Figured I'd ask or anything that was a pita in the removal, I've watch the video of the guy for the M340. Thanks

[SpecTaqlar]

Originally Posted by dszpiro

I have tried to carefully compare the photo from the Supra strut bar you linked to the Dinan strut bars for the G42. Aside from the mounting points and other dimensions, I don't think the Supra bar will make it over the engine cover. The photos make it look like the G42 mounting points on the tops of the towers are lower compared with the top of the engine cover than the Supra set-up. What do you think?

I can vouch for your investigation first hand - the strut tower mounts are lower on the G42 than on the supra , there is no way to mount it without some adjusting . I've got a blitz strut brace , and for the strut mounts i used some stiffer rubber washers that i pretty much sandwiched between the strut mount and the brace at not even 30Nm. If i pull on the brace there seems to be 0 movement and the whole car shakes , but i am aware that using rubber anywhere in a strut-brace install pretty much negates the use of the brace so i just accepted its faith as engine bling. It does look nice , and in probably what is pure placebo , i feel like the structure around the engine is stiffer , and therefore the frontend very slightly so better.

[Xlastar67]

So is this strut bar on a BMW, or Supra?

[Bee Pee]

Turner Msport brace if budget allows

https://www.turnermotorsport.com/p-2...rut-brace-kit/

[SpecTaqlar]

Originally Posted by Xlastar67

So is this strut bar on a BMW, or Supra?

I think the question was for me, right ?

It's a bmw - g42 m240i xdrive.

[SpeedGeek]

Cheers,
New to the BMW world but not to car modding, happy to have a turbo back under the hood. It all started with a 95 Eclipse GSX, then a G35, now this!

My first bolt-on while I wait for Dinan intake parts to show up was the OEM Strut bars. BMW (51-61-7-456-115) x2 I used stainless rivet nuts for the front (M10 Stainless Steel Rivet nuts M10-1.5mm Threads) and beveled a lip if I need to remove that aluminum plate, then tap’d the rear holes Metric Thread Tap,M10 Right Hand Thread Tap (M10x1.5) M10 Stainless Bolts and washers

The entire process took maybe an hour, going slowly – It was pretty easy. I polished the bars for bling. I purchased the bars from getbmwparts.com
Love this car, still 600 miles into break in - Maybe this info will help anyone interested. Great Forum!