n55 v5 Procede update

OpenFlash · 01-31-2011, 07:14 PM

Hi guys,
Quick update from today's testing:

2011 135
7DCT
15k miles
Provede v5 1-31 beta
Catless dp
Magnaflow cat-back
STOCK fmic
91oct Shell
Peak boost 14psi
5th Gear pulls

So as of a few days ago, we got around the fuel system limit that triggered a limp when trying to run more than 12psi above 5000rpm. Now we can basically run whatever the little turbo is willing to give me. In this case, it's a full 14psi up until 6000rpm. Above that, boost naturally falls off to 12psi. But without the fuel limitation, things became a lot more interesting. Especially at high RPM where the car makes considerably more power. Hopefully, we can make a solid 360whp when we install the FMIC. Because right now, datalogs show 120F intake temps at the top of 5th gear. Leaves a good deal of room for improvement.

On this dyno, my 135 put down 263whp/290lbft when it was stock. I'll have to dig up the file from the shop. Should have more info later this week.

Cheers,
Shiv

FrankiE90 · 01-31-2011, 07:21 PM

very nice. //

shockin330i · 01-31-2011, 07:23 PM

Sweet!! Can we download these already?!?!

AltecBX · 01-31-2011, 07:24 PM

Wow. Good progress.
15K miles already..

shockin330i · 01-31-2011, 07:27 PM

Quote:

Originally Posted by AltecBX

Wow. Good progress.
15K miles already..

pfft im at 18!

BrianMN · 01-31-2011, 07:40 PM

I assume 5th gear DCT is similar to 4th gear 6MT?

Nice results!! The dip is gone

themyst · 01-31-2011, 07:51 PM

what's the deal with that little spike on run #16?

jjurroz · 01-31-2011, 08:06 PM

There we go!

Send me the map

k thanks!

Regards,
Jose

shockin330i · 01-31-2011, 08:08 PM

I already emailed shiv... :eeps:

OpenFlash · 01-31-2011, 08:10 PM

Hey guys,
Still a few more days of testing ahead. So hang tight. Once it's ready, i'll post up the update

shockin330i · 01-31-2011, 08:17 PM

Quote:

Originally Posted by shiv@vishnu

Hey guys,
Still a few more days of testing ahead. So hang tight. Once it's ready, i'll post up the update

The torture!

FrankiE90 · 01-31-2011, 08:36 PM

what catless downpipe were u using Shiv?

shockin330i · 01-31-2011, 08:53 PM

Quote:

Originally Posted by FrankiE90

what catless downpipe were u using Shiv?

He fabricated his own...

I need these ready for mfest!!!!

FrankiE90 · 01-31-2011, 08:59 PM

Quote:

Originally Posted by shockin330i

He fabricated his own...

I need these ready for mfest!!!!

u sure it's the one he said he was making?
Specs please.

try'n to calculate gains from these runs
link'd here without DP.
http://www.e90post.com/forums/showpo...0&postcount=13

shockin330i · 01-31-2011, 09:11 PM

I do believe so.. Not much hp wise, but look at that torque! And the graph is a lot smoother

FrankiE90 · 01-31-2011, 09:22 PM

Quote:

Originally Posted by shockin330i

I do believe so.. Not much hp wise, but look at that torque! And the graph is a lot smoother

yeh saw that.
torque monster.

from what i'm gathering
DP gains roughly (12whp / 34 ft-lbs) give or take a few.

interested in see/n dyno numbers w/ FMIC on this 135 n55.

Alan l. · 01-31-2011, 09:28 PM

Game, set ...Match.

Good job Shiv

Alan

grandmoff · 01-31-2011, 09:36 PM

Nice! Very exciting

shockin330i · 01-31-2011, 09:38 PM

I really need to run some meth on this sucker!

Keik E92 M3 · 01-31-2011, 09:39 PM

Ready to buy shiv! let me know when you have a procede in stock ready for me..

Money in hand... Also when ever you are ready to sell those custom DP's let me know lol.. Money in hand...

OpenFlash · 01-31-2011, 09:53 PM

Quote:

Originally Posted by BrianMN

I assume 5th gear DCT is similar to 4th gear 6MT?

Nice results!! The dip is gone

Yes, it's nearly identical. 6500rpm in 4th gear is 135mph

Shiv

OpenFlash · 01-31-2011, 09:54 PM

Quote:

Originally Posted by keikdasneak

Ready to buy shiv! let me know when you have a procede in stock ready for me..

Money in hand... Also when ever you are ready to sell those custom DP's let me know lol.. Money in hand...

I'll have an updating regarding the downpipes later this week. This week is going to be fun for BOTH n54 and n55 announcements.

Shiv

01-31-2011, 07:14 PM	#1
OpenFlash 1791 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	n55 v5 Procede update Hi guys, Quick update from today's testing: 2011 135 7DCT 15k miles Provede v5 1-31 beta Catless dp Magnaflow cat-back STOCK fmic 91oct Shell Peak boost 14psi 5th Gear pulls So as of a few days ago, we got around the fuel system limit that triggered a limp when trying to run more than 12psi above 5000rpm. Now we can basically run whatever the little turbo is willing to give me. In this case, it's a full 14psi up until 6000rpm. Above that, boost naturally falls off to 12psi. But without the fuel limitation, things became a lot more interesting. Especially at high RPM where the car makes considerably more power. Hopefully, we can make a solid 360whp when we install the FMIC. Because right now, datalogs show 120F intake temps at the top of 5th gear. Leaves a good deal of room for improvement. On this dyno, my 135 put down 263whp/290lbft when it was stock. I'll have to dig up the file from the shop. Should have more info later this week. Cheers, Shiv Last edited by OpenFlash; 01-31-2011 at 07:19 PM..
	Appreciate 0 Tweet Quote

01-31-2011, 07:21 PM	#2
FrankiE90 Major General 667 Rep 8,800 Posts Drives: Krooked Sk8board Join Date: Feb 2008 Location: Pasadena, Ca iTrader: (11)	very nice. // __________________ FrankiE90 AKA:.[The TANK] *CLICK THE SIG E90s (been gone but not forgotten) • KW clubsports • • • • • • • • • • 18" BBS GT4 // Build E30 (pending) + E46 M3 Wagon ESTORIL Blue
	Appreciate 0 Quote

01-31-2011, 07:23 PM	#3
shockin330i Brigadier General 807 Rep 4,784 Posts Drives: 2016 ZCP M3 Join Date: Jan 2007 Location: f y'all, I'm from Texas (RGV) iTrader: (1)	Sweet!! Can we download these already?!?! __________________ ERnie 2016 BSM/f80/ZCP
	Appreciate 0 Quote

01-31-2011, 07:24 PM	#4
AltecBX Colonel 335 Rep 2,663 Posts Drives: BMW 335xi Sedan; BMW M3 ZCP Join Date: Nov 2007 Location: NYC iTrader: (0) Garage List 2018 BMW M3 ZCP [0.00] 2007 BMW 335Xi [0.00]	Wow. Good progress. 15K miles already.. __________________ 335xi Sedan 6AT \| Weather(70-85°F) \| N54 Tune Comparison Chart \|\| N54 Turbo Upgrade Comparison Chart -PROcede Rev. 2.5 ~ v5 (3/17 maps) / JB4 (8/21 maps) / COBB (Stg2+FMIC LT Aggressive maps) †Procede Map2(UT 45 - IGN 40) Aggression Target 2.0 \| 0-60 in 4.0sec \|\| †Cobb E30 LT (35% Ethanol/65% 93 Octane) \| 0-60 in 3.9sec AR Design Catless DP \| BMS DCI + OCC \| ETS 5 FMIC \| Alpina B3 Trans Flash \|235/265 19" Michelin PSS
	Appreciate 0 Quote

01-31-2011, 07:40 PM	#6
BrianMN Banned 116 Rep 2,428 Posts Drives: 4 Door Family Sedan Join Date: Sep 2009 Location: Minneapolis iTrader: (7)	I assume 5th gear DCT is similar to 4th gear 6MT? Nice results!! The dip is gone
	Appreciate 0 Quote

01-31-2011, 07:51 PM	#7
themyst Major General 189 Rep 6,631 Posts Drives: '16 MK7 GTI Join Date: Feb 2009 Location: NYC iTrader: (8)	what's the deal with that little spike on run #16? __________________ E90 LCI N54 6AT
	Appreciate 0 Quote

01-31-2011, 08:06 PM	#8
jjurroz Second Lieutenant 34 Rep 269 Posts Drives: 2018 F80 M3 ZCP Join Date: Sep 2010 Location: Ft. Lauderdale, FL iTrader: (0)	There we go! Send me the map k thanks! Regards, Jose
	Appreciate 0 Quote

01-31-2011, 08:08 PM	#9
shockin330i Brigadier General 807 Rep 4,784 Posts Drives: 2016 ZCP M3 Join Date: Jan 2007 Location: f y'all, I'm from Texas (RGV) iTrader: (1)	I already emailed shiv... :eeps: __________________ ERnie 2016 BSM/f80/ZCP
	Appreciate 0 Quote

01-31-2011, 08:10 PM	#10
OpenFlash 1791 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	Hey guys, Still a few more days of testing ahead. So hang tight. Once it's ready, i'll post up the update
	Appreciate 0 Quote

01-31-2011, 08:36 PM	#12
FrankiE90 Major General 667 Rep 8,800 Posts Drives: Krooked Sk8board Join Date: Feb 2008 Location: Pasadena, Ca iTrader: (11)	what catless downpipe were u using Shiv? __________________ FrankiE90 AKA:.[The TANK] *CLICK THE SIG E90s (been gone but not forgotten) • KW clubsports • • • • • • • • • • 18" BBS GT4 // Build E30 (pending) + E46 M3 Wagon ESTORIL Blue
	Appreciate 0 Quote

01-31-2011, 09:11 PM	#15
shockin330i Brigadier General 807 Rep 4,784 Posts Drives: 2016 ZCP M3 Join Date: Jan 2007 Location: f y'all, I'm from Texas (RGV) iTrader: (1)	I do believe so.. Not much hp wise, but look at that torque! And the graph is a lot smoother __________________ ERnie 2016 BSM/f80/ZCP
	Appreciate 0 Quote

01-31-2011, 09:28 PM	#17
Alan l. Major General 5746 Rep 9,016 Posts Drives: 2020 F95 X5M Competition Join Date: Jun 2009 Location: United States iTrader: (9)	Game, set ...Match. Good job Shiv Alan __________________
	Appreciate 0 Quote

01-31-2011, 09:36 PM	#18
grandmoff Private First Class 3 Rep 144 Posts Drives: 2011 e92 335i M-Sport 6MT Join Date: Jan 2011 Location: Atlanta iTrader: (1)	Nice! Very exciting
	Appreciate 0 Quote

01-31-2011, 09:38 PM	#19
shockin330i Brigadier General 807 Rep 4,784 Posts Drives: 2016 ZCP M3 Join Date: Jan 2007 Location: f y'all, I'm from Texas (RGV) iTrader: (1)	I really need to run some meth on this sucker! __________________ ERnie 2016 BSM/f80/ZCP
	Appreciate 0 Quote

01-31-2011, 09:39 PM	#20
Keik E92 M3 Banned 175 Rep 1,343 Posts Drives: BMW M3 DCT Join Date: Jan 2010 Location: SoCal iTrader: (6) Garage List 2009 BMW [9.00] 2011 BMW 335i [6.80]	Ready to buy shiv! let me know when you have a procede in stock ready for me.. Money in hand... Also when ever you are ready to sell those custom DP's let me know lol.. Money in hand...
	Appreciate 0 Quote