Install splitter carbon for E90

Cobra_Gia · 09-21-2010, 10:14 AM

I ordered through ebay and splitter for a bmw e90.
Can you give me instructions for the installation because I find it very difficult to place.
The splitter seem a bit short and I doubt they put the bumper perfectly.
Is this normal?
Do you have pictures for installation?

Here's an example:

MusclezMarinara · 09-21-2010, 10:22 AM

They look correct to me

fdriller9 · 09-21-2010, 11:35 AM

Yea that's the best eBay fitment I've seen.

remmib · 09-21-2010, 01:26 PM

Is that pics the ones you bought? Those look OEM.

Cobra_Gia · 09-21-2010, 03:08 PM

the photo is an example ...
I bought the splitter at bjautofans on ebay.
but I do not know how to install
glue? double sided tape? ...?
I owe much force to place and there are still a few millimeters so that it fits in well with the bumper

Cobra_Gia · 09-23-2010, 02:06 PM

somebody who can help me?

turboboosted · 09-23-2010, 06:22 PM

Try to remove the screws on the bottom of your bumper first.
Dry fit it and see how it looks.
(If the inner edges of the splitters still can not meet the mesh grill, then I think you have a set with bad fitment)
Then proceed with automotive 3M double sided tape.
Put the screws back on.

OwnAge · 09-23-2010, 08:01 PM

GL, hope you can fit the ebay splitter without any headaches.

Cobra_Gia · 09-24-2010, 04:02 AM

I will try to place them, but I'm really straining to the splitter that hugs the bumper. I have to push very hard.

turboboosted · 09-25-2010, 01:37 AM

I think you get a set with fitment issue

EmjayDavis · 09-25-2010, 04:43 AM

Are these OEM? these are nice

remmib · 09-25-2010, 01:58 PM

Quote:

Originally Posted by EmjayDavis

Are these OEM? these are nice

No, but the one in the pics in post #1 looks like OEM.

09-21-2010, 10:14 AM	#1
Cobra_Gia New Member 5 Rep 19 Posts Drives: e90 318d kit M Join Date: Aug 2010 Location: Belgium iTrader: (0) Garage List 2008 E90 [0.00]	Install splitter carbon for E90 I ordered through ebay and splitter for a bmw e90. Can you give me instructions for the installation because I find it very difficult to place. The splitter seem a bit short and I doubt they put the bumper perfectly. Is this normal? Do you have pictures for installation? Here's an example: Attached Images
	Appreciate 0 Tweet Quote

09-21-2010, 10:22 AM	#2
MusclezMarinara Banned 268 Rep 5,018 Posts Drives: VALNCYA Join Date: Jan 2009 Location: Jersey iTrader: (23) Garage List 2011 BMW 1M [9.22] 2009 335i Sedan xdrive [9.34]	They look correct to me
	Appreciate 0 Quote

09-21-2010, 11:35 AM	#3
fdriller9 Banned 259 Rep 7,089 Posts Drives: '06 AW 330xi Join Date: Mar 2009 Location: North Jersey/Philly/NYC iTrader: (4) Garage List 2006 330xi [6.44]	Yea that's the best eBay fitment I've seen.
	Appreciate 0 Quote

09-21-2010, 01:26 PM	#4
remmib General 1580 Rep 29,213 Posts Drives: 2013 F10 520d M-Sport Join Date: Feb 2006 Location: Norway iTrader: (0)	Is that pics the ones you bought? Those look OEM. __________________ F10 520d M-Sport Alpine White \| HRE P43SC 20x9+20x11 \| Michelin PSS 255/35+295/30 \| KW V3 Coilover \| M5 Front Sway Bar + M550d Rear Sway Bar \| 3DDesign Front Lip \| BMW M Performance CF Spoiler \| BMW M Performance Diffuser \| BMW M Performance Black Grills \| BMW M Performance Pedals \|
	Appreciate 0 Quote

09-21-2010, 03:08 PM	#5
Cobra_Gia New Member 5 Rep 19 Posts Drives: e90 318d kit M Join Date: Aug 2010 Location: Belgium iTrader: (0) Garage List 2008 E90 [0.00]	Splitter install the photo is an example ... I bought the splitter at bjautofans on ebay. but I do not know how to install glue? double sided tape? ...? I owe much force to place and there are still a few millimeters so that it fits in well with the bumper
	Appreciate 0 Quote

09-23-2010, 02:06 PM	#6
Cobra_Gia New Member 5 Rep 19 Posts Drives: e90 318d kit M Join Date: Aug 2010 Location: Belgium iTrader: (0) Garage List 2008 E90 [0.00]	somebody who can help me?
	Appreciate 0 Quote

09-23-2010, 06:22 PM	#7
turboboosted Lieutenant 55 Rep 437 Posts Drives: E90 \| E92 \| F10 Join Date: Apr 2009 Location: San Jose, CA iTrader: (19)	Try to remove the screws on the bottom of your bumper first. Dry fit it and see how it looks. (If the inner edges of the splitters still can not meet the mesh grill, then I think you have a set with bad fitment) Then proceed with automotive 3M double sided tape. Put the screws back on.
	Appreciate 0 Quote

09-23-2010, 08:01 PM	#8
OwnAge Gourik 190 Rep 4,302 Posts Drives: soon Join Date: Mar 2007 Location: Innisfil Ontario. iTrader: (1) Garage List 2009 328i [8.90]	GL, hope you can fit the ebay splitter without any headaches. __________________
	Appreciate 0 Quote

09-24-2010, 04:02 AM	#9
Cobra_Gia New Member 5 Rep 19 Posts Drives: e90 318d kit M Join Date: Aug 2010 Location: Belgium iTrader: (0) Garage List 2008 E90 [0.00]	I will try to place them, but I'm really straining to the splitter that hugs the bumper. I have to push very hard. Attached Images
	Appreciate 0 Quote

09-25-2010, 01:37 AM	#10
turboboosted Lieutenant 55 Rep 437 Posts Drives: E90 \| E92 \| F10 Join Date: Apr 2009 Location: San Jose, CA iTrader: (19)	I think you get a set with fitment issue
	Appreciate 0 Quote

09-25-2010, 04:43 AM	#11
EmjayDavis Captain 56 Rep 717 Posts Drives: Batmobile Join Date: Sep 2010 Location: Toronto iTrader: (0)	Are these OEM? these are nice
	Appreciate 0 Quote