bimmerpost/
G87 / G42
BMW M2 and 2-Series Coupe
| 09-24-2022, 02:52 PM | #1 |
|
Second Lieutenant
 
193
Rep 271
Posts |
Torque Specs
Does anyone know the torque specs for the brake caliper bolts both front and rear on these cars? What about a shop manual?
__________________
This is only my opinion as I'm a retired professional ASE master grease monkey technician, now instructor. Your best teacher is your last mistake. Use what I post at your own risk as you know teachers only know book knowledge.
|
| 09-25-2022, 07:20 AM | #3 |
|
Captain
693
Rep 610
Posts |
Fronts:
3411 Tightening torque overview Brake caliper / brake anchor plate at front swivel bearing M12 Renew screw. Tightening torque 130 Nm Brake disc to front wheel hub M8 tightening torque 16 Nm Brake disc to front wheel hub M8 Renew screw. Tightening torque 16 Nm Brake guard plate at front swivel bearing M6x12 Renew screw. tightening torque 8 Nm Guide bolt (brake caliper on brake anchor plate) M8 Renew screws. 35 Nm Rears: 3421 Tightening torque overview Brake anchor plate to rear wheel carrier M12 Renew screw. Tightening torque 130 Nm Brake disc to rear wheel hub M8 tightening torque 16 Nm Brake disc to rear wheel hub M8 Renew screw. Tightening torque 16 Nm Brake protection plate on the rear wheel carrier M6x12 Renew screw. tightening torque 8 Nm Guide bolt (brake caliper on brake anchor plate) M8 35 Nm |
|
Appreciate
2
shonseb148.50 cosmicphotons43.50 |
| 09-25-2022, 10:07 AM | #4 | |
|
Second Lieutenant
193
Rep 271
Posts |
Quote:
|
|
|
Appreciate
0
|
| 10-13-2022, 08:43 PM | #5 |
|
Second Lieutenant
193
Rep 271
Posts |
Rdurty2,
Do you have torque specs for the front axle spindle nut and the lower strut bolts. Are these bolts a one time use?
__________________
This is only my opinion as I'm a retired professional ASE master grease monkey technician, now instructor. Your best teacher is your last mistake. Use what I post at your own risk as you know teachers only know book knowledge.
|
|
Appreciate
0
|
| 10-14-2022, 09:05 AM | #6 | |
|
First Lieutenant
380
Rep 375
Posts |
Quote:
 Double check the attached, but if I read it correctly. Output shaft to wheel bearing M16 Replace collar bolt and spring. Jointing torque 210Nm Angle of rotation 90° Spring strut shock absorber to swivel bearing M10 Renew screw and nut. Tightening via screw. Tightening torque 60Nm Angle of rotation 180° |
|
|
Appreciate
0
|
| 10-14-2022, 09:11 AM | #7 |
|
Captain
693
Rep 610
Posts |
Hopefully what you need is listed below.
Front axle carrier to body, rear M14 Renew screws. tightening torque 175 Nm Front subframe on front/center of body M12 Renew screws. Tightening torque 108 Nm Thrust field to front axle support M10 tightening torque 56 Nm Holder to front axle support Oval-head screw TS5 x 16 tightening torque 2.6 Nm Crash lever on frame/adapter of front subframe M14 Tightening torque 100 Nm Tension strut to front axle support M12 Renew bolt and cage nut. Tighten in normal position. Tightening torque 68 Nm Angle of rotation 180 ° Tension strut to swivel bearing M14 Renew nut. tightening torque 175 Nm Wishbone to front axle support M12 Renew screw and nut. Tighten in normal position! Tightening via screw. Tightening torque 68 Nm Angle of rotation 180 ° Wishbone to swivel bearing M14 Renew nut. tightening torque 175 Nm Damper weight to spring strut M8 Renew screw. Joining torque 28 Nm Angle of rotation 90 ° Front spring strut support bearing to spring strut M12 Renew nut. 71 Nm Nut and locknut/self-locking nut M8 Renew screws. Joining torque 28 Nm Angle of rotation 90 ° Special tool to pressure plate Tightening torque 8 Nm Spring strut to swivel bearing M10 Renew screw and nut. Tightening via screw. Tightening torque 60 Nm Angle of rotation 180 ° |
|
Appreciate
0
|
| 10-14-2022, 09:15 AM | #8 |
|
Captain
693
Rep 610
Posts |
Here is where I get it all from, has all of the service bulletins (it shows service bulletins for ALL models so don't be scared when there are over 1k listed haha), etc. Click on link and then click start.
https://onl-osmc-b2i.bmwgroup.com/os...avigation=true Then go through the drop downs on the right to select our car. Then tightening torque button along top, then use drop down menu on left hand side to narrow things down. |
|
Appreciate
0
|
| 10-15-2022, 12:56 PM | #10 |
|
Second Lieutenant
193
Rep 271
Posts |
This is great information! Just what I have been looking for. Thank you very much for sharing.
__________________
This is only my opinion as I'm a retired professional ASE master grease monkey technician, now instructor. Your best teacher is your last mistake. Use what I post at your own risk as you know teachers only know book knowledge.
|
|
Appreciate
0
|
| 10-17-2022, 09:09 PM | #12 |
|
Second Lieutenant
193
Rep 271
Posts |
Years ago when I was wrenching we never or hardy ever replace bolts and now I see this quite often. I know these bolts are torque to yield and they stretch for max holding power but what are the chances if you reuse them. What are the thoughts here on this forum and is there a BMW tech working at a dealer say.
__________________
This is only my opinion as I'm a retired professional ASE master grease monkey technician, now instructor. Your best teacher is your last mistake. Use what I post at your own risk as you know teachers only know book knowledge.
|
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|
