[roblese90]

Installed the bilstein b12 pro kit and took it to an alignment shop. Was told I needed a camber kit in front to get the camber into spec. Car is still pulling to the right. Do I need adjustable camber plates? Or non adjustable?

[Maxmax73]

Originally Posted by roblese90

Installed the bilstein b12 pro kit and took it to an alignment shop. Was told I needed a camber kit in front to get the camber into spec. Car is still pulling to the right. Do I need adjustable camber plates? Or non adjustable?

It would be nice to see the printout of the alignment with all the numbers.

[feuer]

You need an alignment shop.

[bluewater328]

Originally Posted by feuer

You need an alignment shop.

Agreed. I have the B12 and it's not hard to get into alignment. If you have M3 control arms, it's gonna be a little cambered, but within M3 specs.

A decent alignment shop is gonna figure these things out or discuss with you. No way does it need a camber plate just for a regular alignment. At most I've seen shops pop the alignment pin on the top hat -- but again, your shop should be talking to you about this if they know what they're doing.