Pics of 285's on the rear?

ferocity02 · 02-09-2015, 06:28 PM

Looking at new wheel/tire setups and think I might go with 285/30R19's in the rear. The highish offset and the fact that it's a pre-LCI E90 should allow for this.

Anyone have pictures of 285's in the rear?

More specifically, anyone have pictures of 285's on a 10" wide wheel? I hate the tire stretched over the wheel look and am hoping this doesn't look too bad.

ferocity02 · 02-11-2015, 03:28 PM

Bump

ferocity02 · 03-05-2015, 11:47 AM

Bump! Now looking at 285's on a 9.5" ET33 wheel in the rear.

Inline · 03-05-2015, 11:52 AM

I have 275 on a 9.5 inch wheel et30 without the 15mm spacer on a 330

ferocity02 · 03-05-2015, 12:03 PM

Quote:

Originally Posted by Inline

I have 275 on a 9.5 inch wheel et30 without the 15mm spacer on a 330

How does the 330 compare to the 335 in terms of space/track width?

Any fender rolling required?

Have any pictures of the stretch?

Inline · 03-05-2015, 12:28 PM

Have to roll with spacers. No need without them. They have the same track width.

ferocity02 · 03-05-2015, 12:41 PM

Quote:

Originally Posted by Inline

Have to roll with spacers. No need without them. They have the same track width.

Good info, thanks! Do you know how much you were able to space them out before they rubbed without rolling the fenders? My offset is 3mm more than yours but a 285 is a little wider.

Inline · 03-05-2015, 12:42 PM

I would say at the most 5mm without rolling on 285

techwhiz · 03-05-2015, 12:45 PM

I have 19x9.5 ET35 on the rear of my car with 275/30-19.
I'm running Falken tires. No rubbing.
Could go to a 285 or even a 295 if they made one.

ferocity02 · 03-05-2015, 02:42 PM

Quote:

Originally Posted by techwhiz

I have 19x9.5 ET35 on the rear of my car with 275/30-19.
I'm running Falken tires. No rubbing.
Could go to a 285 or even a 295 if they made one.

Spacers? What suspension? About how much room do you have before rubbing the fender.

techwhiz · 03-05-2015, 08:09 PM

Quote:

Originally Posted by ferocity02

Spacers? What suspension? About how much room do you have before rubbing the fender.

No spacers.
Sport suspension with Bilstein B8 shocks.
Not even close to rubbing on a pre-LCI.
On a pre-LCI with ET35 offset you can get a 285 on the rear with no rubbing, even with fat folks in the back.

ferocity02 · 03-05-2015, 08:33 PM

Quote:

Originally Posted by techwhiz

No spacers.
Sport suspension with Bilstein B8 shocks.
Not even close to rubbing on a pre-LCI.
On a pre-LCI with ET35 offset you can get a 285 on the rear with no rubbing, even with fat folks in the back.

So you think an ET33 with 285 would be okay?

techwhiz · 03-06-2015, 12:50 PM

Quote:

Originally Posted by ferocity02

So you think an ET33 with 285 would be okay?

Probably. I know it would fit on my car.
The 2mm difference between an ET33 and ET35 can't make that much difference.

ferocity02 · 03-06-2015, 01:02 PM

Quote:

Originally Posted by techwhiz

Probably. I know it would fit on my car.
The 2mm difference between an ET33 and ET35 can't make that much difference.

Got any pics? I'm curious what the stretch/bulge looks like with a 275 on a 9.5" wheel. I hate the stretch look. I want the sidewall to be straight or with a slight bulge.

SWalters · 03-07-2015, 09:32 PM

Here's 285's on a 9.5x19 et 45

http://www.e90post.com/forums/showpo...2&postcount=25

techwhiz · 03-08-2015, 09:31 PM

Quote:

Originally Posted by ferocity02

Got any pics? I'm curious what the stretch/bulge looks like with a 275 on a 9.5" wheel. I hate the stretch look. I want the sidewall to be straight or with a slight bulge.

Don't have any pics.
No stretch. The sidewalls are straight.
I hate the stretch look also.

For a 19x8.5 and a 19x9.5
A 235 or 245 for the front and a 265-285 rear will not have a stretch.

Sidezz · 03-27-2015, 11:04 AM

Hey guys im desperate for some feedback. I wanna rock 285/35/19 In the back on 19s with offset 25 will this fit????

Sidezz · 03-27-2015, 11:06 AM

And the width is 10 so 19x10

Sidezz · 03-27-2015, 11:10 AM

OHHH and im lowered about 1.2 in the back on h&r auper sports

ferocity02 · 03-27-2015, 03:34 PM

Quote:

Originally Posted by Sidezz

Hey guys im desperate for some feedback. I wanna rock 285/35/19 In the back on 19s with offset 25 will this fit????

There's no way. That's a tall tire, an aggressive offset, not to mention you're lowered.

You would need to roll or maybe even a pull.

ferocity02 · 04-20-2015, 12:11 AM

Well I pulled the trigger on the wheels and tires. The rears are M359 19x10 et38 with Hankook V12 285/30R19. They fit easily without fender rolling, no rubbing. In fact I might be getting a small spacer to push them out a little bit more. I'm thinking 5mm but that might initiate rubbing. Also thinking of going with some 295's.

Fronts are 19x9 245/35R19 and also fit easily without rubbing. They could also use a spacer.

ferocity02 · 04-24-2015, 12:13 PM

Update: The rears rub ever so slightly on big bumps with people in the rear. A little fender rolling and it will be good to go.

02-09-2015, 06:28 PM	#1
ferocity02 Colonel 549 Rep 2,085 Posts Drives: 2013 135is Join Date: May 2014 Location: USA iTrader: (8)	Pics of 285's on the rear? Looking at new wheel/tire setups and think I might go with 285/30R19's in the rear. The highish offset and the fact that it's a pre-LCI E90 should allow for this. Anyone have pictures of 285's in the rear? More specifically, anyone have pictures of 285's on a 10" wide wheel? I hate the tire stretched over the wheel look and am hoping this doesn't look too bad. __________________ 2013 135is DCT Carbon Black Metallic
	Appreciate 0 Tweet Quote

02-11-2015, 03:28 PM	#2
ferocity02 Colonel 549 Rep 2,085 Posts Drives: 2013 135is Join Date: May 2014 Location: USA iTrader: (8)	Bump __________________ 2013 135is DCT Carbon Black Metallic
	Appreciate 0 Quote

03-05-2015, 11:47 AM	#3
ferocity02 Colonel 549 Rep 2,085 Posts Drives: 2013 135is Join Date: May 2014 Location: USA iTrader: (8)	Bump! Now looking at 285's on a 9.5" ET33 wheel in the rear. __________________ 2013 135is DCT Carbon Black Metallic
	Appreciate 0 Quote

03-05-2015, 11:52 AM	#4
Inline First Lieutenant 299 Rep 306 Posts Drives: E90 M3 Zcp Join Date: Mar 2014 Location: Kentucky iTrader: (0) Garage List 2006 E90 330i [10.00]	I have 275 on a 9.5 inch wheel et30 without the 15mm spacer on a 330 Attached Images __________________ E90 330i, E90 335i, E91 328i, E90 M3, E53 X5
	Appreciate 1 Quote

03-05-2015, 12:28 PM	#6
Inline First Lieutenant 299 Rep 306 Posts Drives: E90 M3 Zcp Join Date: Mar 2014 Location: Kentucky iTrader: (0) Garage List 2006 E90 330i [10.00]	Have to roll with spacers. No need without them. They have the same track width. Attached Images __________________ E90 330i, E90 335i, E91 328i, E90 M3, E53 X5
	Appreciate 1 Quote

03-05-2015, 12:42 PM	#8
Inline First Lieutenant 299 Rep 306 Posts Drives: E90 M3 Zcp Join Date: Mar 2014 Location: Kentucky iTrader: (0) Garage List 2006 E90 330i [10.00]	I would say at the most 5mm without rolling on 285 __________________ E90 330i, E90 335i, E91 328i, E90 M3, E53 X5
	Appreciate 1 Quote

03-05-2015, 12:45 PM	#9
techwhiz Colonel 454 Rep 2,973 Posts Drives: e90 335i Sedan - Arctic Join Date: Feb 2012 Location: Bay Area, Ca iTrader: (4)	I have 19x9.5 ET35 on the rear of my car with 275/30-19. I'm running Falken tires. No rubbing. Could go to a 285 or even a 295 if they made one. __________________ Arctic Metallic\CF Splitters, Spoiler, Mirror Covers\LED Tails\LSD\Tinted\Coded\Apex Square SM10-19"\LED Angel Eyes\Gloss Black Grill\Integrated V1 & Galaxy Tab\M-Performance Brakes\Cobb Tuned\xHP Flash\Resonator Removed and -> is your friend.
	Appreciate 0 Quote

03-07-2015, 09:32 PM	#15
SWalters Enlisted Member 5 Rep 45 Posts Drives: 2012 E92 335i Join Date: Apr 2014 Location: Wichita Falls, TX iTrader: (0) Garage List 2012 E92 335i [0.00]	Here's 285's on a 9.5x19 et 45 http://www.e90post.com/forums/showpo...2&postcount=25
	Appreciate 0 Quote

03-27-2015, 11:04 AM	#17
Sidezz Black x Black x Black 0 Rep 13 Posts Drives: 2008 328i Join Date: Sep 2014 Location: Montreal, Quebec, Canada iTrader: (0)	Hey guys im desperate for some feedback. I wanna rock 285/35/19 In the back on 19s with offset 25 will this fit????
	Appreciate 0 Quote

03-27-2015, 11:06 AM	#18
Sidezz Black x Black x Black 0 Rep 13 Posts Drives: 2008 328i Join Date: Sep 2014 Location: Montreal, Quebec, Canada iTrader: (0)	And the width is 10 so 19x10
	Appreciate 0 Quote

03-27-2015, 11:10 AM	#19
Sidezz Black x Black x Black 0 Rep 13 Posts Drives: 2008 328i Join Date: Sep 2014 Location: Montreal, Quebec, Canada iTrader: (0)	OHHH and im lowered about 1.2 in the back on h&r auper sports
	Appreciate 0 Quote

04-20-2015, 12:11 AM	#21
ferocity02 Colonel 549 Rep 2,085 Posts Drives: 2013 135is Join Date: May 2014 Location: USA iTrader: (8)	Well I pulled the trigger on the wheels and tires. The rears are M359 19x10 et38 with Hankook V12 285/30R19. They fit easily without fender rolling, no rubbing. In fact I might be getting a small spacer to push them out a little bit more. I'm thinking 5mm but that might initiate rubbing. Also thinking of going with some 295's. Fronts are 19x9 245/35R19 and also fit easily without rubbing. They could also use a spacer. __________________ 2013 135is DCT Carbon Black Metallic
	Appreciate 0 Quote

04-24-2015, 12:13 PM	#22
ferocity02 Colonel 549 Rep 2,085 Posts Drives: 2013 135is Join Date: May 2014 Location: USA iTrader: (8)	Update: The rears rub ever so slightly on big bumps with people in the rear. A little fender rolling and it will be good to go. __________________ 2013 135is DCT Carbon Black Metallic
	Appreciate 0 Quote