[Revoltos]

1, You will only get static rev limit lights on a non M car.
2, MoeTE87 has screen shotted the coding for the HUD side of things earlier in this post.
3, M cars don't have front fogs so there is no option to indicate your front fogs are on in the cluster.
4, You need to make sure that the M-sport chassis options are not switched on in your I-drive as it will display that instead of drive mode (efficiency drive graphic) in the cluster.

[SuspecTARX]

Originally Posted by Revoltos

What does that coding enable moeTE87?

SuspecTARX, what car did you install the F80 cluster in mate? Your rev counter rev limit lights are showing way more segments than does.

Hey, sorry haven't visited the forums in a while
My f8x cluser is installed in my 330d.

The rpm leds on mine are just coded like that, they don't move or anything, had them coded differently (think it was 1 yellow and 2 red) at one point as well, changed it while trying different coding options, stopped playingaround with it and just stayed like that

[SuspecTARX]

Originally Posted by ClearlyB58

@MoeTE87

Do you know if it’s possible to —

A. Move the shift light indicator in the tac and HUD to have orange start at 5.5k and the two reds at 6&6.5k

B. An easier way to access the M HUD display. Currently I have to manually go into display settings to select the option.

I have an answer for the question about moving the shift lights, unfortunately at this point it doesn't seem possible, me together with BimmerRetroLA have tried changing a lot of different coding options on my f8x cluster.

We wanted to change the scale of the RPM gauge it self, how many of the shift lights are lit up and the scale of the temp gauge, sadly no luck The reason why we wanted to make these changes was because my diesel has a max of 6k RPMs on my old cluster and the redline starts at 5k RPM, as well as the temp gauge is 100 C in the middle for my old cluster and this one is about 120 C.

The idea was to change the scale that the RPM is displayed in, so that where the f8x cluster has 8,5k RPM it would be 6k RPM instead and so on, if this would have been successfully done I would then order custom gauge faces for the RPM gauge and the temp gauge so that it shows correctly again. At the moment all is displayed correctly, it's just that everything after 5,4k on the gauge is useless for the diesel engine XD

Hopefully can make it work how I want sometime in the future with some sort of adapter or something

Only scale that we could change with coding was the gas tank size to a diesel one so that the fuel gauge shows correctly, sucks that they don't have the options as easily available for the other gauges as well

[MSPORT62]

Originally Posted by SuspecTARX

To be honest it's not that different from the regular F3x cluster with extended scope aka 6WA, but for me it's the little things that are different and make it look better for me personally.

1)The digital speed is displayed like 2 or 3 times bigger than in an F3x cluster and it also seems to refresh much faster.

2)Design of the gauge faces and the digital instantaneous consumption display looks nicer, more modern imo

3)Cut off and slightly differently shaped rings around the gauges look nicer

4)The ///M logo under the speedo looks much nicer than totaly unused space like the regular cluster

5)White backlight with the red speedo needles are also nice, but might be more tyring for your eyes at night than the red backlight, although you can turn down the brightness to a pretty low amount tbh

I probably missed some things, but for other people it would probably be different anyways

Why are the led higher than the original posted pic from te87

[MSPORT62]

Can u code the cluster on BimmerCode like you could with 6wa

[MSPORT62]

I also have manual so will it tell me what gear to go in like my current cluster or tell me the gear it’s in like f80 or will it show nothing