[Freakstar50]

Originally Posted by kwaazaar

Yes here. I bought the Andream from Ali Express.

Do you maybe have the link of the seller?

[BeamerAR15]

Originally Posted by Freakstar50

Hey hey, are there any Dutch people here? I was wondering if anyone knows a good EU seller of the MMI.

I wanna buy one but rather have a good word about one then just pick one up

https://www.android-car-dvd.de/

[seanswn]

Hi Experts,

I had a 2016 330i F30, it come with NBT EVO (with the Build-in 4G and uses the "EVO" maps instead of "NEXT".

Should I get the NBT version of the MMI or the EVO version of the MMI ?

Since I have the wording for both NBT and EVO, getting confused a bit :-)

[Watsey]

I have posted about this previously but am coming back to it to see whether someone can help clear up some confusion.

2012 F31
Nav Pro (large screen)
NBT
ID4

PIN 5025 unlocks the system settings information.

MMI box appears to be an Andream unit but the precise model designation is not stated in the system information.
CUST Version: B2_V1.1.2
MCU Version:" 20.8.19.23

When deliberately trying to start a software update without a USB drive inserted the system states that a GEMINI_PACK.BIN! file is not present, i.e. this proves that the unit is looking for GEMINI files rather than ISPBOOOT.BIN.

Software tends to be updated for reasons of stability improvements and/or functionality enhancements so I'd like to update the unit if possible, however...

Looking at Post #3...

B2_V1.1.2 is not listed as a software release (B2 releases start at V1.1.5)
V1.1.2 is listed for a "B" model version.

Could someone with real knowledge or experience of the Andream units comment / correct / advise regarding the following :

1. Is the software version a more reliable indicator of the model, i.e. in reality I have a B unit even though B2 is stated in the system information ?
2. Conversely, is it more likely that it's a B2 unit but running a software version that precedes the earliest version (1.1.5) listed in Post #3 ?
3. If I have a B2 unit, and bearing in mind that 1.1.5 is the earliest version available for download in Post #3, does that effectively mean that my unit doesn't have a software upgrade path (because the instructions in Post #3 state that GEMINI files have to be installed sequentially, and versions must not be skipped) ?
4. Can CUST and MCU be updated independently (i.e. in any sequence) or, for example, does the MCU have to be updated first ?

Thanks.

[zeroy]

Hi all!

Got my MMI from Andream(EU) [https://www.android-car-dvd.de/] this week and just finished to install it in my 2016 F45 Activ Tourer (not easy to find a spot for the MMI!). For me the main goal was to get the Android Auto since my OEM SatNav is locked to Japan (im in Ireland).

Got zero manual in the box but I knew how to connect it up from looking online.... got the Android Auto working from my phone with WiFi (I assume its using WiFi) so this is great but now I have a few issues:

• If Im on Google maps the Reverse Camera does not come on, need to exit from MMI, is that normal? Was expecting it to change auto?
• The bigger issue is the Telephone Audio, I can call or be called but I cant hear the person on the other end? I have set the "Multimedia" to "External and "Aux" as I think you are meant to do but nothing... they can hear me fine.

This last problem is the same if I phone from OEM I-Drive by the way.. where I am a bit lost is with what should connect to what, I have BT Paired on OEM I-Drive from before the install and I have WiFi now from the MMI + BT Paired (I see its already paired in MMI BT Devices) - Am I missing something here?

From MMI:

EWM-BMCP-NBT04X
车载互联终端【TCU】
JUNS Model: [EWMCP-N726]

SDK Version: 25.0.0.7.0.0.2.0
CUST Version: EW_B2_1.6.9R3_n
MCU Version: 22.10.10.110
HW Version: B_N2_1_G

Anyone has a manual, Video instruction also for this MMI? Thanks in advance!

[fe7565]

Originally Posted by Watsey

I have posted about this previously but am coming back to it to see whether someone can help clear up some confusion.

2012 F31
Nav Pro (large screen)
NBT
ID4

PIN 5025 unlocks the system settings information.

MMI box appears to be an Andream unit but the precise model designation is not stated in the system information.
CUST Version: B2_V1.1.2
MCU Version:" 20.8.19.23

When deliberately trying to start a software update without a USB drive inserted the system states that a GEMINI_PACK.BIN! file is not present, i.e. this proves that the unit is looking for GEMINI files rather than ISPBOOOT.BIN.

Software tends to be updated for reasons of stability improvements and/or functionality enhancements so I'd like to update the unit if possible, however...

Looking at Post #3...

B2_V1.1.2 is not listed as a software release (B2 releases start at V1.1.5)
V1.1.2 is listed for a "B" model version.

Could someone with real knowledge or experience of the Andream units comment / correct / advise regarding the following :

1. Is the software version a more reliable indicator of the model, i.e. in reality I have a B unit even though B2 is stated in the system information ?
2. Conversely, is it more likely that it's a B2 unit but running a software version that precedes the earliest version (1.1.5) listed in Post #3 ?
3. If I have a B2 unit, and bearing in mind that 1.1.5 is the earliest version available for download in Post #3, does that effectively mean that my unit doesn't have a software upgrade path (because the instructions in Post #3 state that GEMINI files have to be installed sequentially, and versions must not be skipped) ?
4. Can CUST and MCU be updated independently (i.e. in any sequence) or, for example, does the MCU have to be updated first ?

Thanks.

Well, let me go with the easy one first. The MCU can be updated with much less risk, in my experience, even across models B and B2 and brands. May not be true in all cases. Normally doing CUST or MCU first does not matter, but if your MCU and CUST dates have years between them...it may be an issue.


My best guess is that it is a Andream B2 (Version 1). Not aware that anyone flashed a B2 on a B and lived to tell about it...so unlikely, but possible. There is a post referencing "freeozone" who updated to "B2_V1.2.0_t" the same exact CUST and MCU as yours:
https://f30.bimmerpost.com/forums/sh...75929&page=290

More here buried in the pages on that "B2_V1.2.0_t"version and the MCU:
https://f30.bimmerpost.com/forums/sh...75929&page=295
https://f30.bimmerpost.com/forums/sh...75929&page=323
https://f30.bimmerpost.com/forums/sh...75929&page=504
https://f30.bimmerpost.com/forums/sh...75929&page=295
https://f30.bimmerpost.com/forums/sh...75929&page=286


What file was the unit looking for (Gemini or ISPBOOT) when you wanted to update the CUST? And what file was it looking for (Gemini or ISPBOOT) when you wanted to update the MCU?

[Watsey]

Originally Posted by fe7565

Well, let me go with the easy one first. The MCU can be updated with much less risk, in my experience, even across models B and B2 and brands. May not be true in all cases. Normally doing CUST or MCU first does not matter, but if your MCU and CUST dates have years between them...it may be an issue.


My best guess is that it is a Andream B2 (Version 1). Not aware that anyone flashed a B2 on a B and lived to tell about it...so unlikely, but possible. There is a post referencing "freeozone" who updated to "B2_V1.2.0_t" the same exact CUST and MCU as yours:
https://f30.bimmerpost.com/forums/sh...75929&page=290

More here buried in the pages on that "B2_V1.2.0_t"version and the MCU:
https://f30.bimmerpost.com/forums/sh...75929&page=295
https://f30.bimmerpost.com/forums/sh...75929&page=323
https://f30.bimmerpost.com/forums/sh...75929&page=504
https://f30.bimmerpost.com/forums/sh...75929&page=295
https://f30.bimmerpost.com/forums/sh...75929&page=286


What file was the unit looking for (Gemini or ISPBOOT) when you wanted to update the CUST? And what file was it looking for (Gemini or ISPBOOT) when you wanted to update the MCU?

Many thanks fe7565 - I'll read back through the Posts, including the links which you've provided, and will report back. Much appreciated.

[tuzogt]

I've also ordered from Andream for G30 ID6. What revision could it be?
https://www.dropbox.com/sc/pujq93cmp...f1Ftr0NkGYiQYa
https://www.dropbox.com/sc/1x4muphhm...QSSdUD5PkvcV6a

[findleybc]

I have the following:

Car:
2020 X2
8.8 in display
NBT EVO ID6

MMI
Road Top MMI
SDK Version: 25.0.0.7.0.0.2.0
CUST Version: ER169R3
MCU Version: 22.5.14.118
HW Version: B_E_G
DIP switches 1, 2, 3 are on

Install was easy and AA seems to be working both wirelessly and via USB.
The problem I'm having is aspect ratio in Autolink and HDMI input. It seems that this display is wider than 16:9 and is therefore stretching the video horizontally. AA aspect ratio is not an issue. I have tried adjusting top, and left scrap in Carplay settings but they only effect the AA screen. Road Top support has been very good with other issues but they haven't addressed this one yet. I am just wondering if any of the other units have this issue as well.

[fe7565]

Originally Posted by findleybc

I have the following:

Car:
2020 X2
8.8 in display
NBT EVO ID6

MMI
Road Top MMI
SDK Version: 25.0.0.7.0.0.2.0
CUST Version: ER169R3
MCU Version: 22.5.14.118
HW Version: B_E_G
DIP switches 1, 2, 3 are on

Install was easy and AA seems to be working both wirelessly and via USB.
The problem I'm having is aspect ratio in Autolink and HDMI input. It seems that this display is wider than 16:9 and is therefore stretching the video horizontally. AA aspect ratio is not an issue. I have tried adjusting top, and left scrap in Carplay settings but they only effect the AA screen. Road Top support has been very good with other issues but they haven't addressed this one yet. I am just wondering if any of the other units have this issue as well.

Attachment 3226446
Attachment 3226447

1. Check your Android phone display settings. I am not intimately familiar with Android phones, but there are some quirky deep settings.

2. DIP switch settings are not always uniform between these MMI units.

3. Is your 8.8" display original to the car or retrofit? Did you ever code the resolution on it?

HU_NBT > 3000 HMI > DISPLAY_SIZE_RESOLUTION = 8.8_1280x480
HU_NBT > 3001 EXBOX > DISPLAY_VARIANTE = breites_display

( Apix1 vs Apix2???? 1280x720???)

[findleybc]

Originally Posted by fe7565

1. Check your Android phone display settings. I am not intimately familiar with Android phones, but there are some quirky deep settings.

2. DIP switch settings are not always uniform between these MMI units.

3. Is your 8.8" display original to the car or retrofit? Did you ever code the resolution on it?

HU_NBT > 3000 HMI > DISPLAY_SIZE_RESOLUTION = 8.8_1280x480
HU_NBT > 3001 EXBOX > DISPLAY_VARIANTE = breites_display

( Apix1 vs Apix2???? 1280x720???)

The HDMI signal is coming from a Chromecast unit. I appears that 720P is the only resolution I can set that to when connected to the MMI. See picture below.

The dip switches are set correctly for this display as it works for AA and the MMI main menu.

This is the original display and no coding has been done. The setting are: DISPLAY_SIZE_RESOLUTION = 8.8_1280x480
DISPLAY_VARIANTE = breites_display
I changed them around but that just caused blank screen or NO SIGNAL display.

[tuzogt]

Did anyone successfully installed it on a g30? I'm really struggling with the harness of the original cable for the display. I can't separate it. Any suggestions?

[tuzogt]

Do you have any restarts?
I just testet mine and I've had like 4 in one minute.

Originally Posted by findleybc

I have the following:

Car:
2020 X2
8.8 in display
NBT EVO ID6

MMI
Road Top MMI
SDK Version: 25.0.0.7.0.0.2.0
CUST Version: ER169R3
MCU Version: 22.5.14.118
HW Version: B_E_G
DIP switches 1, 2, 3 are on

Install was easy and AA seems to be working both wirelessly and via USB.
The problem I'm having is aspect ratio in Autolink and HDMI input. It seems that this display is wider than 16:9 and is therefore stretching the video horizontally. AA aspect ratio is not an issue. I have tried adjusting top, and left scrap in Carplay settings but they only effect the AA screen. Road Top support has been very good with other issues but they haven't addressed this one yet. I am just wondering if any of the other units have this issue as well.

Attachment 3226446
Attachment 3226447

[Domih]

Originally Posted by Freakstar50

Hey hey, are there any Dutch people here? I was wondering if anyone knows a good EU seller of the MMI.

I wanna buy one but rather have a good word about one then just pick one up

Hey, I'm in Veldhoven (The Netherlands) and sell Andream MMI's. Always welcome to have a chat

[Domih]

There is a new update for Andream BMW CIC, NBT and EVO MMI's (1.6.13)

It allows you to use bluetooth in stead of AUX. Saves a lot of install work for CIC mmi's and sound quality is better.

Can be downloaded from here:
https://102435.sharepoint.com/:f:/s/...960Xw?e=1QRsGy

Update at own risk, As far as I know, only works on 1.5.x and 1.6.x version numbers.

Only known problem is that Siri's reply volume is very low.

[Migz71]

Originally Posted by Domih

There is a new update for Andream BMW CIC, NBT and EVO MMI's (1.6.13)

It allows you to use bluetooth in stead of AUX. Saves a lot of install work for CIC mmi's and sound quality is better.

Can be downloaded from here:
https://102435.sharepoint.com/:f:/s/...960Xw?e=1QRsGy

Update at own risk, As far as I know, only works on 1.5.x and 1.6.x version numbers.

Only known problem is that Siri's reply volume is very low.

Domih, many thanks for these updates mate! All audio coming through cars BT now on AA! Can I ask what options 1 & 2 are on the carplay option? Cheers

[findleybc]

Originally Posted by tuzogt

Do you have any restarts?
I just testet mine and I've had like 4 in one minute.

tuzogt
I have not had any restarts to speak of. Seems to be pretty solid.

[findleybc]

Road Top says they can't fix the aspect ratio problem I'm having with HDMI and Autolink. Has anyone tried these modes on the Andream or Bimmertech units?

Originally Posted by findleybc

I have the following:

Car:
2020 X2
8.8 in display
NBT EVO ID6

MMI
Road Top MMI
SDK Version: 25.0.0.7.0.0.2.0
CUST Version: ER169R3
MCU Version: 22.5.14.118
HW Version: B_E_G
DIP switches 1, 2, 3 are on

Install was easy and AA seems to be working both wirelessly and via USB.
The problem I'm having is aspect ratio in Autolink and HDMI input. It seems that this display is wider than 16:9 and is therefore stretching the video horizontally. AA aspect ratio is not an issue. I have tried adjusting top, and left scrap in Carplay settings but they only effect the AA screen. Road Top support has been very good with other issues but they haven't addressed this one yet. I am just wondering if any of the other units have this issue as well.

[Tmae]

Originally Posted by Migz71

Domih, many thanks for these updates mate! All audio coming through cars BT now on AA! Can I ask what options 1 & 2 are on the carplay option? Cheers

Same question regarding 1&2.

And Unfortunately it still doesn‘t solve the issue that siri is not properly working when pushing the steering wheel „voice button“

[findleybc]

Does anyone know how to pan the Google Maps in AA with the iDrive controller (or any way for that matter)? I can zoom by turning the wheel but left, right, up, down do not pan.

Car:
2020 X2
8.8 in display
NBT EVO ID6

Example video:
https://photos.app.goo.gl/5Foc4Y4SWYQzJ2WB7

[Mechy16]

Originally Posted by Domih

There is a new update for Andream BMW CIC, NBT and EVO MMI's (1.6.13)

It allows you to use bluetooth in stead of AUX. Saves a lot of install work for CIC mmi's and sound quality is better.

Can be downloaded from here:
https://102435.sharepoint.com/:f:/s/...960Xw?e=1QRsGy

Update at own risk, As far as I know, only works on 1.5.x and 1.6.x version numbers.

Only known problem is that Siri's reply volume is very low.

Hi, just want to be sure, I currently have this version:


Would I be able to update to 1.6.13? I've read that the update sequence is important. Thanks!

[findleybc]

Originally Posted by Domih

There is a new update for Andream BMW CIC, NBT and EVO MMI's (1.6.13)

It allows you to use bluetooth in stead of AUX. Saves a lot of install work for CIC mmi's and sound quality is better.

Can be downloaded from here:
https://102435.sharepoint.com/:f:/s/...960Xw?e=1QRsGy

Update at own risk, As far as I know, only works on 1.5.x and 1.6.x version numbers.

Only known problem is that Siri's reply volume is very low.

Has anyone tried this or know if it should work on the Road Top EVO MMI?