Removing the cylidner head with engine in car....

iqraceworks · 08-28-2024, 10:23 AM

I need to replace the head gasket on my engine. The new Elring head gasket I installed on my freshly built engine is junk....leaking cooling externally out of it. Sounds like lots of guys have been having issues with these junk Elring gaskets.....they must have had a defective batch or something.

That being said, I really don't want to pull the motor out again. It was a royal pain in the butt.

I'm going to try to pull the head with the engine still in the car. I'm assuming I can pull the turbos off, and just move the manifolds over until they clean the studs coming out of the head....and then just pull the head right off.

Anyone ever done this? Any tips or tricks?

iqraceworks · 09-17-2024, 03:04 PM

Nobody has done this?

08-28-2024, 10:23 AM	#1
iqraceworks Brigadier General 2091 Rep 3,810 Posts Drives: 2007 335i Join Date: Aug 2019 Location: Missouri iTrader: (0)	Removing the cylidner head with engine in car.... I need to replace the head gasket on my engine. The new Elring head gasket I installed on my freshly built engine is junk....leaking cooling externally out of it. Sounds like lots of guys have been having issues with these junk Elring gaskets.....they must have had a defective batch or something. That being said, I really don't want to pull the motor out again. It was a royal pain in the butt. I'm going to try to pull the head with the engine still in the car. I'm assuming I can pull the turbos off, and just move the manifolds over until they clean the studs coming out of the head....and then just pull the head right off. Anyone ever done this? Any tips or tricks? __________________ 2007 335i, BMS DCI, BMS Chargepipe w/Tial BOV, ARM Catless Downpipes, silicone inlets, Bilstein B12 Prokit Suspension, Whiteline subframe bushings, Front/Rear M3 control arms, G-Plus FMIC, Stage 2 LPFP, Custom E40 tune by Justin (V8Bait), xHP stage 3 transmission flash, RB Two Turbos....10.90 @ 128mph
	Appreciate 0 Tweet Quote

09-17-2024, 03:04 PM	#2
iqraceworks Brigadier General 2091 Rep 3,810 Posts Drives: 2007 335i Join Date: Aug 2019 Location: Missouri iTrader: (0)	Nobody has done this? __________________ 2007 335i, BMS DCI, BMS Chargepipe w/Tial BOV, ARM Catless Downpipes, silicone inlets, Bilstein B12 Prokit Suspension, Whiteline subframe bushings, Front/Rear M3 control arms, G-Plus FMIC, Stage 2 LPFP, Custom E40 tune by Justin (V8Bait), xHP stage 3 transmission flash, RB Two Turbos....10.90 @ 128mph
	Appreciate 0 Quote