06-29-2023, 09:43 PM | #1 |
Registered
0
Rep 3
Posts |
Oil Reset Unsuccessful & oil level measurement not possible
Hey! I brought a used 2015 320i a while ago, and I just got an oil change done and neither me nor my mechanic were able to reset the oil through the dashboard. It just says "Reset unsuccessful" I've tried doing it multiple times throughout the past few days and I keep getting this message.
Not sure if this is related, but when I go into vehicle status on the screen, and go to oil level measurement, it says that oil level measurement is not possible at this time and to get the system inspected on the next service. Any idea what might be wrong and how I can fix this? Also, what would be the effect if I just didn't fix the issue? |
06-30-2023, 08:12 AM | #2 |
Lieutenant General
8289
Rep 16,164
Posts |
Do you have a dash light that shows the oil change is either due or overdue? Is an oil change shown in iDrive > Vehicle info>Vehicle status>Service required ? If not it can't be reset. Oil level can only be measured with the engine running at full operating temperature.
|
Appreciate
0
|
07-09-2023, 08:29 PM | #3 | |
Registered
0
Rep 3
Posts |
Quote:
I have also tried measuring the engine oil on my flat garage after driving around for 30 mins, the oil temp was just under 250. It said that oil measurement is not possible. |
|
Appreciate
0
|
04-28-2024, 09:43 PM | #5 | |
Private First Class
20
Rep 133
Posts |
Quote:
|
|
Appreciate
0
|
04-29-2024, 12:45 AM | #6 |
Registered
0
Rep 3
Posts |
Yea i had the same thing, ended up just taking it to BMW n they fixed it for me. Later found out I had a bad oil sensor, which probably caused it. You should check the oil sensor and if it's not the problem just take it to bmw.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|