[Benzinfa-Lo]

Hi there,

Sorry english is not my first language.
Please help me, I researched for a few weeks, but I have not been able to find solution for my problem with the Car. My car is stock , I only changed chargepipe because stock broke.
So I cleaned t-map sensor, maf sensor, changed throttle body to a used but good condition one. I really don't know what to do next, most people's issues have been solved after doing these, but it did not help for me. I have these codes, I read them with MHD universal adapter.

1. 2714 - Throttle valve, function: Sluggish, too slow.


2. 28AB - Throttle valve, potentiometers 1 and 2: Double fault.


3. 28B0 - Consequent reaction: Throttle valve: Emergency operation mode active.


4. 28BA - DME, internal fault, activation of throttle valve: Internal communication fault.


5. 28D4 - Throttle valve, adaptation: Teach in again, bottom stop not taught in.


6. 36BB - DME, internal fault, software reset: Malfunction.


7. 387F - Power management: Standby current violation

Here is a video of what is happening:

If anyone could help me solve this, I would appreciate it, thanks a lot for your time in advance!

[Benzinfa-Lo]

Sorry wrong place for this, please delete it, I have posted in N55, and unable to delete this.

[konstat]

Originally Posted by Benzinfa-Lo

Hi there,

Sorry english is not my first language.
Please help me, I researched for a few weeks, but I have not been able to find solution for my problem with the Car. My car is stock , I only changed chargepipe because stock broke.
So I cleaned t-map sensor, maf sensor, changed throttle body to a used but good condition one. I really don't know what to do next, most people's issues have been solved after doing these, but it did not help for me. I have these codes, I read them with MHD universal adapter.

1. 2714 - Throttle valve, function: Sluggish, too slow.


2. 28AB - Throttle valve, potentiometers 1 and 2: Double fault.


3. 28B0 - Consequent reaction: Throttle valve: Emergency operation mode active.


4. 28BA - DME, internal fault, activation of throttle valve: Internal communication fault.


5. 28D4 - Throttle valve, adaptation: Teach in again, bottom stop not taught in.


6. 36BB - DME, internal fault, software reset: Malfunction.


7. 387F - Power management: Standby current violation

Here is a video of what is happening:
https://youtu.be/sUTiFQYOXDc?si=sKj7pNXi0LLJwnPD

If anyone could help me solve this, I would appreciate it, thanks a lot for your time in advance!

Have you performed the throttle adaptation reset using MHD? Make sure you wait 30 seconds after turning the ignition off and before starting the car again as MHD states. Post back if you’re still having an issue after that