[M_Power Rob]

Originally Posted by Ronin76

MP HAS? How low?

No, he is on H&R adjustable. In general, H&R adjustables usually go lower than KW (or MP).

[AZG87]

Originally Posted by Silverlining_m2

M Perf HAS, all the way down, but no spacers.

How's the ride specifically on the MP HAS all the way down? Considering taking mine from port installed height to this.

[Geighty7]

Originally Posted by Ronin76

MP HAS? How low?

H&R VTF- 1.4 front and back.

[M_Power Rob]

Originally Posted by AZG87

How's the ride specifically on the MP HAS all the way down? Considering taking mine from port installed height to this.

I am on MP HAS all the way down, no issues whatsoever.

[AZG87]

Originally Posted by M_Power Rob

I am on MP HAS all the way down, no issues whatsoever.

Thanks good to hear. Iirc you are running 20" in front and had to do a custom liner job? How wide and what tire size up there?

[M_Power Rob]

Originally Posted by AZG87

Thanks good to hear. Iirc you are running 20" in front and had to do a custom liner job? How wide and what tire size up there?

Correct. . 20x9.5 with 275/30/20s up front. Yes, I cut fins out and added stainless mesh (dont want mesh to be too fine or it will trap/collect debris and block airflow) secured with stainless rivets.

[M_Power Rob]

Originally Posted by M_Power Rob

I am on MP HAS all the way down, no issues whatsoever.

This lowered all the way. Easy to see the difference between MP HAS and H&R adjustable.

[AZG87]

Originally Posted by M_Power Rob

This lowered all the way. Easy to see the difference between MP HAS and H&R adjustable.

Looks great. When you have a moment would you mind checking what your approximate ground clearance is up front with no after market lip?

[Carefree]

I’m curious as well. I wonder if mine is lowered more than expected. Current measurements:
5” ground to front fascia
5 1/2” to bottom of rocker panels

[40 Cylinders]

HAS 15mm

[Ronin76]

Originally Posted by 40 Cylinders

HAS 15mm

God damn that color woth gold wheels!

[M_Power Rob]

Originally Posted by AZG87

Looks great. When you have a moment would you mind checking what your approximate ground clearance is up front with no after market lip?

Sorry for the crooked tape measure. I am on 20" up front. Two front measurements and one just after tge front whhel.

[AZG87]

Originally Posted by M_Power Rob

Sorry for the crooked tape measure. I am on 20" up front. Two front measurements and one just after tge front whhel.

Thanks! Considering you are all the way down you actually have more clearance still than I would have guessed.

[M_Power Rob]

Originally Posted by AZG87

Thanks! Considering you are all the way down you actually have more clearance still than I would have guessed.

Curious as to the difference with someone on 10" up front.