[CDMACC]

Hi all,
Figured id throw together a post on what I've done and what im doing as I work through a big list of mods that doesn't seem to end
Id say about 95% of the work I do myself at home, I guess getting halfway through my apprenticeship did come in handy.

- 2007 335i E92 -

Performance Mods
- MHD Stage 2+
- XHP Stage 3
- Injen Cold Air Intake
- VRSF Cattless Downpipes
- Charge Pipe + Turbosmart RACEPORT BOV
- 5" Stepped Front Mount Intercooler
- Upgraded Inlets
- Oil Catch Can

Interior
- Swapped out black interior for red which I found at wreckers
- Trims wrapped carbon fibre
- Android Headunit with Bluetooth keyboard
- MHD Wifi adapter connected to headunit for gauges and codes.

Exterior
- Msport Bodykit (found by chance on a msport model in same colour at wreckers)
- Carbon Fibre Rear Diffuser
- M3 Replica Fenders
- Rebuilt Headlights (LED halos, Quad demon eye, Blacked out housings)
- Silvers NEOMAX Type R coilovers

Repairs
- Both turbos replaced 2 months after buying under warranty 2017
- Rebuilt Transmission 2019
- Small collision 2019 causing front passenger damage Radiator, Headlight, Bumper replaced
- Alternator, IBS sensor, Battery, Engine earth replaced chasing electrical issue
- MOSFETS changed in ECU

Upcoming
- Fueling
- M3 rear end
- Turbos
- Ignition

Currently
- Oil Pan Gasket
- Making custom headlight part for Quad projector headlight look

If anyones trying to figure out the plates CDMACC - Christopher Daryl Macc

[CDMACC]

Day 1

[CDMACC]

Silvers NEOMAX Type R Coilovers
Currently sitting on its ass

[CDMACC]

My Headlight build
- RBGW Halos
- Quad Demon
- Blacked out housing
- tinted indicators

[CDMACC]

Interior

[CDMACC]

Current photos

[shannon1]

Nice work

[Brule]

Can your rear wheels turn? Crazy low.

[Socket]

Very nice.... welcome to the club

[CDMACC]

Originally Posted by Brule

Can your rear wheels turn? Crazy low.

yeah they do haha just full scrub, there set at the lowest point from when I installed them I still need to adjust everything but waiting till I get rubber on the wheels that are going on and spacers.

[Brule]

My kwv3 are the same.
I put it in a middle height at first and it was mega slammed.

[Aus335iguy]

Looks awesome man! Be sure and post up when you do more

[CDMACC]

Starting engine bay clean up.
Respraying, wire and hose tucking, degrease and clean.
Whilst waiting for new hoses.

[eastsidaz]

Tidy. What inlets did you go with? how was the fitment?

Keeping the wingless look? I like it

[CDMACC]

Originally Posted by GovernUrMental

Tidy. What inlets did you go with? how was the fitment?

Keeping the wingless look? I like it

I just went with standard size silicone ones eBay specials as I wanted to cut them shorter to change the location of my injen intakes from where there mounted to closer forward and wasn't keen on wasting money if I got it wrong but fitment was sweet just a pain in the ass the rear one is to get into the right position

[CDMACC]

Mail day

[CDMACC]

So I finally made a decision on how I wanted to mount the inner projector lens and threw it together for a play around, now these ones are basically done I'm thinking about selling them and going for a different setup. 3/4 halos carbon inner housing, eyebrow, custom side marker blah blah blah I keep changing my mind.
Excuse the filthy lenses

[Aus335iguy]

Dunno if it's just me but cant see pics

[CDMACC]

Originally Posted by Aus335iguy

Dunno if it's just me but cant see pics

Must have closed my phone to early

[CDMACC]

Photos

[CDMACC]

More

[CDMACC]

I'll put up better photos when There all cleaned up and installed