|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Coding back to Stock Using NCSExpert.
|
|
07-20-2013, 06:36 PM | #1 | ||
Enlisted Member
5
Rep 42
Posts |
Coding back to Stock Using NCSExpert.
Please help!
I have issues using NCSExpert to code my car back to stock and need some assistance. *I have a 09 BMW 335i Vert (E93) w/ comfort access. I have been reading the forums on how to code. I was successfully able to code many things (Kill Seatbelt Chimes, iDrive Disclaimer, welcomelights, unlockdoors when key out, etc). But when i attempted to code close mirrors/lock doors (key fob), i lost the ability to drop the top. I attempted a couple of methods to code the car back to stock but none seem to work. I attempted coding with car on/off, Door Open/Close, Expertmode/FSW PSW MAN (Profile) but each time i went back to confirm settings, it seems that the coding I performed earlier is still enabled. Whenever i went attempted to process car than code car.. The NCSExpert would throw out an error message & the car would throw a MIL/CEL. *See attachment. Any suggestions? Method 1: Quote:
Quote:
Last edited by acidbbg; 07-20-2013 at 06:47 PM.. |
||
07-20-2013, 07:10 PM | #3 | |
Guest
0
Rep n/a
Posts
Drives:
|
Quote:
|
|
Appreciate
0
|
07-20-2013, 08:26 PM | #4 | |
Enlisted Member
5
Rep 42
Posts |
Quote:
i won't be doing it again but here is the error log: [20:31:04.187] [2013-07-20] [SERIE] 2020 Error LFCDHDIA.CPP (A_E65DR.IPS/IPO) CDHapiResultText 1 [20:31:04.187] [2013-07-20] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht ULF2_HI [20:31:04.300] [2013-07-20] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6 [20:31:04.300] [2013-07-20] [SERIE] SG antwortet nicht SG_CODIEREN Last edited by acidbbg; 07-20-2013 at 08:42 PM.. |
|
Appreciate
0
|
07-20-2013, 10:27 PM | #5 |
Enlisted Member
5
Rep 42
Posts |
This is the correct guide..Thanks for the confirmation BMW..
1. Load NCSExpert. 2. Load Profile and select Expertmode 3. F1 (VIN/ZCS/FA) 4. F3 (ZCS/FA f .ECU) 5. Choose E89 (for the E9X) 6. Select CAS 7. F6 (BACK) 8. F4 (Process ECU) 9. Select the Module I want to Revert back to Stock. 10. F2->Choose "SG_Codieren->ok 11. F3->to start coding the ecu with factory settings according to the vehicle VO. Last edited by acidbbg; 07-21-2013 at 01:05 AM.. |
Appreciate
0
|
07-21-2013, 01:10 AM | #6 | |
Guest
0
Rep n/a
Posts
Drives:
|
Quote:
|
|
Appreciate
0
|
04-12-2016, 11:48 PM | #8 |
Private
4
Rep 58
Posts |
trying to reset to default
Please help asap
ive followed this guide , however all my modules remain the same. problem: the key fob closing door, open windows, lock reopen mirrors stop working . After I tried to code vr-keyout. Ive followed this exactly . 1. Load NCSExpert. 2. Load Profile and select Expertmode 3. F1 (VIN/ZCS/FA) 4. F3 (ZCS/FA f .ECU) 5. Choose E89 (for the E9X) 6. Select CAS 7. F6 (BACK) 8. F4 (Process ECU) 9. Select the Module I want to Revert back to Stock. 10. F2->Choose "SG_Codieren->ok 11. F3->to start coding the ecu with factory settings according to the vehicle VO. After i go back to check if anything is default everything is the same as i coded it. Like komfortschliessung_fb stays active, the car process the code and turn off and turn on, but the default remains the same and the mirrors don't work with fob, the bc-velocity feature is the only coded feature that is still working. |
Appreciate
0
|
05-16-2016, 12:17 PM | #13 |
Private First Class
159
Rep 138
Posts |
The issue was kind of easy to fix.... If you use a profile that has "manipulation" enabled in the settings, the software will upload the content of the .MAN file in the module when you do a SG_codieren job. If manipulation is off, the software will use the VO and the daten files to generate the default file that would have been found in the module originally (based on the vehicle options list)
__________________
2016 435i xdrive Gran Coupé
2011 E82 1M Custom Frozen Brilliant White 2006 E60 M5 Alpine white SMG DELETE 6MT swap. Gone : 135i 2008 | Gone : 2008 535i Touring| |
Appreciate
0
|
03-30-2020, 06:35 PM | #17 |
New Member
0
Rep 8
Posts |
E90 325i not starting after coding mistake
I just got NCS expert set up on my computer and coded the digital speedo, scrolling through the code I found "SPORT ANZEIGE" - sport display, which sounded exiting. I changed this to aktiv and after this the car wouldn't start.
I tried resetting the code to default using this very guide: 1. Load NCSExpert. 2. Load Profile and select Expertmode 3. F1 (VIN/ZCS/FA) 4. F3 (ZCS/FA f .ECU) 5. Choose E89 (for the E9X) 6. Select CAS 7. F6 (BACK) 8. F4 (Process ECU) 9. Select the Module I want to Revert back to Stock. 10. F2->Choose "SG_Codieren->ok 11. F3->to start coding the ecu with factory settings according to the vehicle VO. This did reset both the digital speedo and sport anzeige to nicht_aktiv but the car still won't start. I am however not sure if my FSW_PSW.TRC file has been correctly restored. By memory I don't remember seeing this at the beginning of it for example: CBS_STAT_01H anzeige CBS_STAT_02H anzeige CBS_STAT_04H anzeige CBS_STAT_03H anzeige CBS_STAT_10H anzeige CBS_STAT_11H anzeige CBS_STAT_20H anzeige CBS_STAT_21H sperre CBS_MODE level_4 CBS_GELB_HUAU wert_01 CBS_RES_SPERR Does anyone with expertise have any idea of what can be the problem? Might I have fried some module/electronics in the car? As im sure you can understand I am quite devastated by the situation and any help will be much appreciated. |
Appreciate
0
|
07-21-2020, 01:58 PM | #20 |
Major
267
Rep 1,173
Posts |
|
Appreciate
0
|
07-21-2020, 02:19 PM | #21 | |
Registered
0
Rep 2
Posts |
Quote:
I loaded profile expertmode clicked F1 and then F3 I choose chasis e46 ECU AKMB , mk60,F6 ,F4 and then I executed job exited ncs attempted to start the car no crank sound maybe a dead battery ? the dashlights stay on even I when take out the key You think it need to be coded back to stock ? Last edited by CEzshi1; 07-21-2020 at 02:24 PM.. |
|
Appreciate
0
|
07-21-2020, 03:08 PM | #22 | |
Major
267
Rep 1,173
Posts |
Quote:
|
|
Appreciate
0
|
Bookmarks |
|
|