DIY instruction - cic script activation - fsc

BimaExtremeRetro · 07-03-2017, 03:33 AM

since it seems this info is impossible to find, here it is.

Note. bmw coding forum has a whole bunch of info regarding patcher version 2 however as time of writing only works for US and Central Europe. title "lets hack the cic" some very good contributors and a good read.

Anyway, if you have retrofitted cic and dont want to use an emulator here is what you do to script activate so the nav itself works.

Credit goes to "This guide was made by TheChoseN aka Czozen" for the script activation guide.

Download this guide and files on any of the below links. Its very stright forward. To script activate, the instructions have worked for me on the IP allocated first time every time except once on an 2008 early cic, whatver i didnt i could not get it work. Updated cic software, worked first time as per those insturctions. People have all sortes of dramas connected to the cic, ive never had any besides that one. I have only ever used putty and total commander, never had a drama.

https://file.io/u6wpBo
https://filetea.me/n3wX40A6plZT6CxSgtp4vdV3Q
http://s000.tinyupload.com/?file_id=...43829048172955
https://ufile.io/k59h2
http://www.yourfilelink.com/get.php?fid=1377837

Once activated, your good to go, thanks "Czozen" your the best.

Now using dr.gini version B014 and following "Czozen" instructions you can.

1. work out your fsc code for map updates. this will be 100% correct however will not work if your script activated due to vin mismatch. so..

2. You can use dr. gini B014 (other versions after that dont have the "check fsc" as far as i know) and try place you cic into "Check FSC" which will temporarly disable the vin check to your CAS and allow map updates to be made on script activated units.

This has never actually worked for me, no matter the cable, icom etc. gini just crashes when i try "Check VIN" or Check FSC.

Anyway, here are the links to gini 014, i suggest donating to him as its good software if you can figuer out how to actually donate to him. The 2 forums ive seen him on i cannot get access to and im over it. They are mhh and car technology or something like that. It order to simply access them and try read the pages i imitate googlebot.

In order to run gini you need ediabas 7. Download mike easy tools for a 1 click installer which is good:

https://mega.nz/#!kAASwa7I!AJLVnnEBw...2BsZofE-TBYGmk

Gini 014
https://file.io/gco1a5
https://filetea.me/n3wrecTnMdmRhKpCZBS8wDMxQ
http://s000.tinyupload.com/index.php...94208391626034
https://ufile.io/4bec7

A later version of gini can be found here (b021 i think) but its does not have the fsc option like b014:
https://mega.nz/#F!VwJzgByC!K0krmp2Rfy86NetmhCIx6A

Anyway, i was able to use gini to work out the fsc code and for anyone with factory fitted cic, use it, few click and your done. no need to screw around with 1B files and so on.

ANyway, if your cic is retrofitted and script activated like above in order to update maps, we need to put the cic into "Check FSC" mode to trick it. If gini does not work, then this is what you do.

1. download FSTool which is a bmw tool again which seems impossible to get a hold of, like its some kind of big secret, anyway here it is. It does a tonne of stuff, but for the purpose of this tutorial, follow the install instructions and you can get your new mpas updated in your cic with no effor at all.

The download also has JRE 1.4.2 which is needed to run fs tool. Installing in the default program files directory did not work for me, so i installed it into C: \ EC-Apps \ JavaSoft \ JRE \ 1.4.2_06

FSTool2 Download Here
https://file.io/9YEejj
https://filetea.me/n3wGpt95x6YSAqxhD3O50H7Rg
https://ufile.io/z6f4j

Below are the installation instructions, its very simple.

But do note: You can ignore the necessary data step, if all your doing is as above.

The settings for check fsc should be under the paramaters tab (after you go to Konfiguration and change to english)

Applications Nr: 1B
Upgrade Index: 1
Diagnose Adresse: 63

CLick on Check_FSC on the left box and again on the right side box, then click activate function (or something similar) and your done.

Dont turn your cic off as its currently been tricked until it restarts, put your usb stick in the glovebox usb, update map, use the fsc code gini gave you, which never worked but now will and your done.

Easy as that. You can do a whole lot more with FS Tools but beyond this.

Here is a bunch of other FSC tools and assorted stuuf which i dont use but have used in the past and some can be very usefull. It has the following

FSC_GENERATOR
BMW-CIC-Special-Utility.rar
CIC_Language_Coding_Utility_1.2.2_cracked.rar
SWID_reader_x32_x64_Edition.zip
BMW_CIC_NBT_FSC_Generator.rar
SwcFscTool

https://file.io/uHEGBB
https://filetea.me/n3wqvKH5iosThuNx5uGWHCcFQ
http://s000.tinyupload.com/index.php...02794798445635
https://ufile.io/gr6ln
http://www.yourfilelink.com/get.php?fid=1377862

There we have it, not so damn hard at all.

----------------------------------------------

1. Basic condition (vehicle)

- freizuschaltendes controller is flashed to the most recent I-stage and installed.

- Terminal 15 is on

Second Basic requirements (work calculator)

- JRE 1.4.2 installed; ATTENTION: older or newer Java versions are not compatible!

- EDIABAS is configured to communicate with your vehicle.

- EDIABAS 7.0.X is installed in the C: \ EDIABAS drive.

- You must have administrator privileges on the computer.

- Tool32 or other EDIABAS applications are NOT running!
Third installation
1) Start fstool.exe and unzip the archive to C: \ Temp \

2) To install the car server, start the batch file C: \ Temp \ fstool \ CSF-V15.0.0.11 \ Inst_Default.bat

3) Disable and exit the Windows service "VServer" in the system settings (start, system control, administration, services, double-click VServer,

4) Start the batch file C: \ Temp \ fstool \ install.bat

4.a.) Customizing the Java path in the FSTool startup file:
The batch program from point 4) automatically calls the start file of the FSTool with an editor for editing. Please enter the current Java installation path of your system at "SET JAVA_HOME =" (eg "SET JAVA_HOME = C: \ EC-Apps \ JavaSoft \ JRE \ 1.4.2_06") and exit the editor with save and exit.

5) Restart your computer!
4th Necessary data:

- The chassis number (VIN) of the corresponding vehicle
- A free code (FSC) to the appropriate VIN and the function to be enabled

Note: The FSC is stating the freizuschaltender function (SVS CIC) and VIN to request time (at least 24 hours prior to activation) by e-mail at swt.support@bmw.de

5th Starting the application s (workstation)

- There are 2 new icons on your desktop:
"Start_FSTool_v2_CarServer.bat" to start the fstools
"Csd start.bat" to start the CarServers

- Double-click "csd start.bat". A DOS box opens
- Double-click "start_FSTool_v2_CarServer.bat". First a DOS box opens and later the FSTool starts

6th Step by step instructions for activating SVS

1) connecting with CarServer
On the Connection tab, press the Connect button,

EDIABAS is started and the successful connection setup is displayed in the status window
2.) input of the parameters
On the "Parameters" tab, specify the following values:

Diagnostic address: 63
Appl No .: 17 (corresponding to the SVS)
Upgrade Index: 1
FGN: The last 7 represent your chassis number

3.) charging an activation code
On the "Freischaltcodes" tab, press the "From file"

In the subsequent file selection dialog, please select the release code that you want to incorporate into the vehicle
4.) Check
On the "SWT services" press the "Activate Upgrade" button. The release code is now inserted into the CIC and activated this can take several seconds.

A successful disconnection is displayed in the status window.

5.) SG reset
By e rfolgreichem importing please perform an SG reset.

Aus335iguy · 07-03-2017, 04:43 AM

I have no idea what half of this stuff means....

BimaExtremeRetro · 07-03-2017, 05:48 AM

Quote:

Originally Posted by Aus335iguy

I have no idea what half of this stuff means....

Download and keep it. You might need it one day

Down_Shift · 07-03-2017, 10:16 PM

holy crap.. i've been looking for these downloads the past few days and then they all just appear in ONE THREAD.

THANK YOU.

BimaExtremeRetro · 07-03-2017, 11:18 PM

Quote:

Originally Posted by Down_Shift

holy crap.. i've been looking for these downloads the past few days and then they all just appear in ONE THREAD.

THANK YOU.

your most welcome, its about time this stuff became available.
share with the free world !!!

BimaExtremeRetro · 07-03-2017, 11:22 PM

it seems some of these links are dead.

who can recommend a good reliable host to anonymously long term upload to and il update them again, what a pita.

BimaExtremeRetro · 07-03-2017, 11:34 PM

updated link incase some broken ones once work.

https://mega.nz/#P!AQAzdlMAmNuLh8qpw...nvFSBp3Wj0q4Ow

pm for for password, its 100% free and without bs

Elmo111 · 05-31-2018, 04:31 PM

Wow - this is amazing, I can't believe how I've only just learnt I can do this kinda stuff to my lil F20...and here was me about to trade it in and get an F30.

roby0588 · 09-05-2018, 10:12 AM

Hello, I'm looking for a few days a way to make the cic work.
BimaExtremeRetro can you send me the pasword for the download.
thank you

BeamerLife17 · 04-12-2019, 11:22 PM

[QUOTE=BimaExtremeRetro;21904578]updated link incase some broken ones once work.

https://mega.nz/#P!AQAzdlMAmNuLh8qpw...nvFSBp3Wj0q4Ow

pm for for password, its 100% free and without bs

Can I have the password please?? Thank you.

skrzyneczkaryzu · 04-29-2019, 02:20 PM

Hello

I need link and password for fstool2

can you send me that?

Rizyl · 05-12-2019, 03:01 PM

Hi,
Could you send me a password too?
Thank you

BoostinE90 · 05-16-2019, 05:43 AM

Password needed as well please thanks

FaxData · 07-23-2019, 02:09 PM

Hi, may I also have the password please? Thanks!

boskap · 08-01-2019, 08:38 AM

password needed please
thx peter

crradule · 08-09-2019, 11:52 AM

Can I have the password please?? Thank you.
crradule

xChrisHTx · 08-31-2019, 07:36 AM

Hey, can I have the password too please?
thanks alot.

greetings from Germany!
xChrisHTx

Jagger2k · 09-06-2019, 08:59 AM

Hi,

Please could you PM the password for FSTool2

Many thanks

mgoldade · 09-06-2019, 10:51 AM

Every link is dead. Please update or PM me

N0rCAL · 11-11-2019, 08:17 PM

can you please pm me with the password as well?

Thanks much.

Matrix6048 · 01-19-2020, 03:30 AM

password needed please
thx Martin

NewBimmer2020 · 02-05-2020, 04:31 PM

Update: I was convinced that I sent a message yesterday to you but I were checking now and it didn't worked, no idea why, anyway, now is sent for sure, pls check it, Thanks.

Quote:

Originally Posted by BimaExtremeRetro

updated link incase some broken ones once work.

https://mega.nz/#P!AQAzdlMAmNuLh8qpw...nvFSBp3Wj0q4Ow

pm for for password, its 100% free and without bs

I already sent pm, Thanks a lot in advance.

07-03-2017, 03:33 AM	#1
BimaExtremeRetro Banned 133 Rep 201 Posts Drives: e91 Join Date: Jan 2017 Location: sydney iTrader: (0)	DIY instruction - cic script activation - fsc - fstool instructions & fsctools since it seems this info is impossible to find, here it is. Note. bmw coding forum has a whole bunch of info regarding patcher version 2 however as time of writing only works for US and Central Europe. title "lets hack the cic" some very good contributors and a good read. Anyway, if you have retrofitted cic and dont want to use an emulator here is what you do to script activate so the nav itself works. Credit goes to "This guide was made by TheChoseN aka Czozen" for the script activation guide. Download this guide and files on any of the below links. Its very stright forward. To script activate, the instructions have worked for me on the IP allocated first time every time except once on an 2008 early cic, whatver i didnt i could not get it work. Updated cic software, worked first time as per those insturctions. People have all sortes of dramas connected to the cic, ive never had any besides that one. I have only ever used putty and total commander, never had a drama. https://file.io/u6wpBo https://filetea.me/n3wX40A6plZT6CxSgtp4vdV3Q http://s000.tinyupload.com/?file_id=...43829048172955 https://ufile.io/k59h2 http://www.yourfilelink.com/get.php?fid=1377837 Once activated, your good to go, thanks "Czozen" your the best. Now using dr.gini version B014 and following "Czozen" instructions you can. 1. work out your fsc code for map updates. this will be 100% correct however will not work if your script activated due to vin mismatch. so.. 2. You can use dr. gini B014 (other versions after that dont have the "check fsc" as far as i know) and try place you cic into "Check FSC" which will temporarly disable the vin check to your CAS and allow map updates to be made on script activated units. This has never actually worked for me, no matter the cable, icom etc. gini just crashes when i try "Check VIN" or Check FSC. Anyway, here are the links to gini 014, i suggest donating to him as its good software if you can figuer out how to actually donate to him. The 2 forums ive seen him on i cannot get access to and im over it. They are mhh and car technology or something like that. It order to simply access them and try read the pages i imitate googlebot. In order to run gini you need ediabas 7. Download mike easy tools for a 1 click installer which is good: https://mega.nz/#!kAASwa7I!AJLVnnEBw...2BsZofE-TBYGmk Gini 014 https://file.io/gco1a5 https://filetea.me/n3wrecTnMdmRhKpCZBS8wDMxQ http://s000.tinyupload.com/index.php...94208391626034 https://ufile.io/4bec7 A later version of gini can be found here (b021 i think) but its does not have the fsc option like b014: https://mega.nz/#F!VwJzgByC!K0krmp2Rfy86NetmhCIx6A Anyway, i was able to use gini to work out the fsc code and for anyone with factory fitted cic, use it, few click and your done. no need to screw around with 1B files and so on. ANyway, if your cic is retrofitted and script activated like above in order to update maps, we need to put the cic into "Check FSC" mode to trick it. If gini does not work, then this is what you do. 1. download FSTool which is a bmw tool again which seems impossible to get a hold of, like its some kind of big secret, anyway here it is. It does a tonne of stuff, but for the purpose of this tutorial, follow the install instructions and you can get your new mpas updated in your cic with no effor at all. The download also has JRE 1.4.2 which is needed to run fs tool. Installing in the default program files directory did not work for me, so i installed it into C: \ EC-Apps \ JavaSoft \ JRE \ 1.4.2_06 FSTool2 Download Here https://file.io/9YEejj https://filetea.me/n3wGpt95x6YSAqxhD3O50H7Rg https://ufile.io/z6f4j Below are the installation instructions, its very simple. But do note: You can ignore the necessary data step, if all your doing is as above. The settings for check fsc should be under the paramaters tab (after you go to Konfiguration and change to english) Applications Nr: 1B Upgrade Index: 1 Diagnose Adresse: 63 CLick on Check_FSC on the left box and again on the right side box, then click activate function (or something similar) and your done. Dont turn your cic off as its currently been tricked until it restarts, put your usb stick in the glovebox usb, update map, use the fsc code gini gave you, which never worked but now will and your done. Easy as that. You can do a whole lot more with FS Tools but beyond this. Here is a bunch of other FSC tools and assorted stuuf which i dont use but have used in the past and some can be very usefull. It has the following FSC_GENERATOR BMW-CIC-Special-Utility.rar CIC_Language_Coding_Utility_1.2.2_cracked.rar SWID_reader_x32_x64_Edition.zip BMW_CIC_NBT_FSC_Generator.rar SwcFscTool https://file.io/uHEGBB https://filetea.me/n3wqvKH5iosThuNx5uGWHCcFQ http://s000.tinyupload.com/index.php...02794798445635 https://ufile.io/gr6ln http://www.yourfilelink.com/get.php?fid=1377862 There we have it, not so damn hard at all. ---------------------------------------------- 1. Basic condition (vehicle) - freizuschaltendes controller is flashed to the most recent I-stage and installed. - Terminal 15 is on Second Basic requirements (work calculator) - JRE 1.4.2 installed; ATTENTION: older or newer Java versions are not compatible! - EDIABAS is configured to communicate with your vehicle. - EDIABAS 7.0.X is installed in the C: \ EDIABAS drive. - You must have administrator privileges on the computer. - Tool32 or other EDIABAS applications are NOT running! Third installation 1) Start fstool.exe and unzip the archive to C: \ Temp \ 2) To install the car server, start the batch file C: \ Temp \ fstool \ CSF-V15.0.0.11 \ Inst_Default.bat 3) Disable and exit the Windows service "VServer" in the system settings (start, system control, administration, services, double-click VServer, 4) Start the batch file C: \ Temp \ fstool \ install.bat 4.a.) Customizing the Java path in the FSTool startup file: The batch program from point 4) automatically calls the start file of the FSTool with an editor for editing. Please enter the current Java installation path of your system at "SET JAVA_HOME =" (eg "SET JAVA_HOME = C: \ EC-Apps \ JavaSoft \ JRE \ 1.4.2_06") and exit the editor with save and exit. 5) Restart your computer! 4th Necessary data: - The chassis number (VIN) of the corresponding vehicle - A free code (FSC) to the appropriate VIN and the function to be enabled Note: The FSC is stating the freizuschaltender function (SVS CIC) and VIN to request time (at least 24 hours prior to activation) by e-mail at swt.support@bmw.de 5th Starting the application s (workstation) - There are 2 new icons on your desktop: "Start_FSTool_v2_CarServer.bat" to start the fstools "Csd start.bat" to start the CarServers - Double-click "csd start.bat". A DOS box opens - Double-click "start_FSTool_v2_CarServer.bat". First a DOS box opens and later the FSTool starts 6th Step by step instructions for activating SVS 1) connecting with CarServer On the Connection tab, press the Connect button, EDIABAS is started and the successful connection setup is displayed in the status window 2.) input of the parameters On the "Parameters" tab, specify the following values: Diagnostic address: 63 Appl No .: 17 (corresponding to the SVS) Upgrade Index: 1 FGN: The last 7 represent your chassis number 3.) charging an activation code On the "Freischaltcodes" tab, press the "From file" In the subsequent file selection dialog, please select the release code that you want to incorporate into the vehicle 4.) Check On the "SWT services" press the "Activate Upgrade" button. The release code is now inserted into the CIC and activated this can take several seconds. A successful disconnection is displayed in the status window. 5.) SG reset By e rfolgreichem importing please perform an SG reset.
	Appreciate 8 Aus335iguy660.00 opjose243.50 julienjj164.50 icon201520.50 Savage_Doze4.00 taner750.00 jsune0.00 jsus0010.00 Tweet Quote

07-03-2017, 04:43 AM	#2
Aus335iguy Colonel 660 Rep 2,139 Posts Drives: 2009 e92 335i MSport DCT Join Date: Jul 2015 Location: Sydney Aus iTrader: (0) Garage List 2009 BMW 335i [10.00]	I have no idea what half of this stuff means.... __________________ When you doppelkaplung you doppel your fun.
	Appreciate 0 Quote

07-03-2017, 10:16 PM	#4
Down_Shift Captain 194 Rep 739 Posts Drives: Slay Join Date: Jan 2011 Location: Beantown iTrader: (4)	holy crap.. i've been looking for these downloads the past few days and then they all just appear in ONE THREAD. THANK YOU.
	Appreciate 0 Quote

07-03-2017, 11:22 PM	#6
BimaExtremeRetro Banned 133 Rep 201 Posts Drives: e91 Join Date: Jan 2017 Location: sydney iTrader: (0)	it seems some of these links are dead. who can recommend a good reliable host to anonymously long term upload to and il update them again, what a pita.
	Appreciate 0 Quote

07-03-2017, 11:34 PM	#7
BimaExtremeRetro Banned 133 Rep 201 Posts Drives: e91 Join Date: Jan 2017 Location: sydney iTrader: (0)	updated link incase some broken ones once work. https://mega.nz/#P!AQAzdlMAmNuLh8qpw...nvFSBp3Wj0q4Ow pm for for password, its 100% free and without bs
	Appreciate 9 Aus335iguy660.00 domdel7.50 BeGood6918.50 Fahrenheit5050.00 reasson0.00 JohnWizz1.50 cashreedhar0.00 Quote

05-31-2018, 04:31 PM	#8
Elmo111 New Member 4 Rep 11 Posts Drives: BMW 118d Urban Join Date: May 2018 Location: UK iTrader: (0)	Wow - this is amazing, I can't believe how I've only just learnt I can do this kinda stuff to my lil F20...and here was me about to trade it in and get an F30.
	Appreciate 0 Quote

09-05-2018, 10:12 AM	#9
roby0588 Registered 0 Rep 1 Posts Drives: BMW E91 2009 Join Date: Sep 2018 Location: Romania iTrader: (0)	Hello, I'm looking for a few days a way to make the cic work. BimaExtremeRetro can you send me the pasword for the download. thank you
	Appreciate 0 Quote

04-12-2019, 11:22 PM	#10
BeamerLife17 F_Thirty 0 Rep 3 Posts Drives: F30 Join Date: Mar 2019 Location: CA iTrader: (0)	updated link password [QUOTE=BimaExtremeRetro;21904578]updated link incase some broken ones once work. https://mega.nz/#P!AQAzdlMAmNuLh8qpw...nvFSBp3Wj0q4Ow pm for for password, its 100% free and without bs Can I have the password please?? Thank you.
	Appreciate 0 Quote

04-29-2019, 02:20 PM	#11
skrzyneczkaryzu New Member 2 Rep 15 Posts Drives: e90 2010 lci 320d ed Join Date: Mar 2019 Location: pl iTrader: (0)	Hello I need link and password for fstool2 can you send me that?
	Appreciate 0 Quote

05-12-2019, 03:01 PM	#12
Rizyl Registered 0 Rep 1 Posts Drives: E92 335i Join Date: Nov 2017 Location: Europe iTrader: (0)	Hi, Could you send me a password too? Thank you
	Appreciate 0 Quote

05-16-2019, 05:43 AM	#13
BoostinE90 Enlisted Member 2 Rep 39 Posts Drives: 09 bmw 335i E90 Join Date: Jun 2017 Location: Bay Area, Ca iTrader: (0)	Password needed as well please thanks
	Appreciate 0 Quote

07-23-2019, 02:09 PM	#14
FaxData Private First Class 100 Rep 121 Posts Drives: 2017 330e (F30) Join Date: May 2017 Location: Southern California iTrader: (0)	Hi, may I also have the password please? Thanks!
	Appreciate 0 Quote

08-01-2019, 08:38 AM	#15
boskap Registered 0 Rep 3 Posts Drives: Bmw F11 Join Date: Jul 2019 Location: Austria iTrader: (0)	password needed please thx peter
	Appreciate 0 Quote

08-09-2019, 11:52 AM	#16
crradule Registered 0 Rep 1 Posts Drives: E91 MY2011 Join Date: Apr 2015 Location: Toronto iTrader: (0)	Can I have the password please?? Thank you. crradule
	Appreciate 0 Quote

08-31-2019, 07:36 AM	#17
xChrisHTx Registered 0 Rep 2 Posts Drives: BMW 318i E90 Join Date: Aug 2019 Location: Germany iTrader: (0)	Hey, can I have the password too please? thanks alot. greetings from Germany! xChrisHTx
	Appreciate 0 Quote

09-06-2019, 08:59 AM	#18
Jagger2k New Member 2 Rep 25 Posts Drives: 2007 e90 330i M sport Join Date: Jan 2017 Location: Leicester iTrader: (0)	Hi, Please could you PM the password for FSTool2 Many thanks
	Appreciate 0 Quote

09-06-2019, 10:51 AM	#19
mgoldade Enlisted Member 2 Rep 34 Posts Drives: 2011 328i x-drive sedan Join Date: Feb 2015 Location: Santa Maria, CA iTrader: (0)	Every link is dead. Please update or PM me
	Appreciate 0 Quote

11-11-2019, 08:17 PM	#20
N0rCAL Registered 0 Rep 1 Posts Drives: BMW 330i Join Date: Nov 2019 Location: Northern CA iTrader: (0)	can you please pm me with the password as well? Thanks much.
	Appreciate 0 Quote

01-19-2020, 03:30 AM	#21
Matrix6048 New Member 0 Rep 8 Posts Drives: 330ci 2007 Join Date: Sep 2019 Location: Praha iTrader: (0)	password needed please thx Martin
	Appreciate 0 Quote