[rxoarnuci]

So the deal is guys... How to code automatic headlights to be always on at daytime and night time, my car has FRM1 (late 2005 model), has automatic light switch selection.. At night my low beams work perfectly, but at day the green light near the auto light switch is off and all the lights are off... I want to make them be on at daytime, not only in night time. My car was coded by pro like a year ago and he make them work all the time on auto switch (always low beams day and night). But when i tried coding my self I failed something and everything went to stock I managed to code everything back, except the AUTO low beams at day... Is there any way to code them back...? I tried literally everything, browsed all the internet and didn't find anything like this. I'm out of options... AND i don't like the yellow DLR's that are ugly and I want to get my daytime auto xenons back please help somebody

[Tunafish]

I believe it will be AL_ALS_DRL set to AKTIV
This will use your low beams as drl's.

[rxoarnuci]

Originally Posted by Tunafish

I believe it will be AL_ALS_DRL set to AKTIV
This will use your low beams as drl's.

There is no such thing as "AL_ALS_DRL" in my FRM module

[Tunafish]

I believe you should be in lcm module (light controller module).

[rxoarnuci]

Searched all the modules, there is no al_als_drl

[dj_aivan]

Try "autom_licht_kontrolle - nicht_activ"

[rxoarnuci]

Originally Posted by dj_aivan

Try "autom_licht_kontrolle - nicht_activ"

This one makes automatic light switch work same as low beams switch. This means that when i turn off the engine and remove the key lights remain on.

[rxoarnuci]

Bump

[dj_aivan]

Originally Posted by rxoarnuci

This one makes automatic light switch work same as low beams switch. This means that when i turn off the engine and remove the key lights remain on.

autom_licht_abschaltung - This one makes automatic light switch work same as low beams switch

You are confused. try this:

autom_licht_kontrolle - Automatic light control (FLC) (Turn on headlights automatically when is DARK)

[rxoarnuci]

Originally Posted by dj_aivan

autom_licht_abschaltung - This one makes automatic light switch work same as low beams switch

You are confused. try this:

autom_licht_kontrolle - Automatic light control (FLC) (Turn on headlights automatically when is DARK)

I'm not confused man... I used both of these... The "autom_licht_kontrolle - Automatic light control (FLC) (Turn on headlights automatically when is DARK)" makes my auto lights switch work same as low beam light switch... And the "abschaltung" line works as described in NCS Dummy... I don't get it whats wrong... Maybe there are other lines that conflict with "kontrolle" line... The green light shines even when i turn off ignition and take the key out Or maybe it needs some time to start working, few engine starts, car locks unlocks... I don't know...

[rxoarnuci]

Originally Posted by rxoarnuci

I'm not confused man... I used both of these... The "autom_licht_kontrolle - Automatic light control (FLC) (Turn on headlights automatically when is DARK)" makes my auto lights switch work same as low beam light switch... And the "abschaltung" line works as described in NCS Dummy... I don't get it whats wrong... Maybe there are other lines that conflict with "kontrolle" line... The green light shines even when i turn off ignition and take the key out Or maybe it needs some time to start working, few engine starts, car locks unlocks... I don't know...

I mean it makes the green light dissapear and auto lights work same as low beams, angel eyes are shining even when the car is locked.

[opjose]

Originally Posted by rxoarnuci

This one makes automatic light switch work same as low beams switch. This means that when i turn off the engine and remove the key lights remain on.

It is not the same, go outside and check your rear lights during the day when this is on for comparison.

[rxoarnuci]

Still no answers bump

[erickarlborg]

Originally Posted by rxoarnuci

Still no answers bump

You should have an option for this in the BC menu, DRL on/off.

The DRL parameters for FRM1 are otherwise: DRL_V_GEDIMMT and DRL_WERT_DIMMUNG.

[Kare32]

Hi guys, could you help me to code the auto lights so that on the auto position during the day when it's bright the angel eyes rings are on in the front and the rear tail light and number plate lights are on the back,and also so that when it's dusk the lights automatically switched to low beam with angel eyes. Because now when I set my headlights switch on auto always shines low beams and angel eyes in front and in the back tail lights and number plate lights, it dosen't matter if bright outside or not.