[scymatical]

I’m having issues removing both coolant feed lines off the block the front one won’t budge at all and the rear one wiggles. Anyone have any tips to removing these?

[oVeRdOsE.]

my engine was out and low mileage and those are hard af to remove. Took me few hours to remove one single turbo.

No trick really, I use pb blaster, pull, wait, pull, pb blaster, pull and wait.

I managed to keep the block clean and the line reusable.

[scymatical]

I’ve been trying for days I used a pry bar and a screw driver and it still won’t budge and I don’t want to break the line

[eastsidaz]

Originally Posted by scymatical

I’ve been trying for days I used a pry bar and a screw driver and it still won’t budge and I don’t want to break the line

Prying on both sides? They dont like to come out just prying on one side. They gotta come out even.

[scymatical]

Ok so I finally was able to get it off I sprayed pb blaster down the actual line and hit it with a mallet left and right until it broke free.