|
|
|
|
 |
 
|
 |
BMW Garage | BMW Meets | Register | Today's Posts | Search |
 |
|
BMW 3-Series (E90 E92) Forum
>
E90 E92-328xi Help needed cannot pass emission(obd port not connecting)
|
 |
| 11-05-2024, 04:23 PM | #1 |
|
New Member
0
Rep 6
Posts |
E90 E92-328xi Help needed cannot pass emission(obd port not connecting)
Hey guys. My obd port is getting power and works for coding with ncsexpert and diagnosis with inpa/ista. It does not work for any basic code reader like torque. Everything connects except the ecu. These code readers have worked for me in the past and I’m not sure when it stopped working. The port also doesn’t work at the emissions site. I have replaced and coded the junction box control unit due to it malfunctioning and I tested different ones as well to rule that out. The port doesn’t work normally with any of them. Any idea what could cause this? I have the bimmerlabs 3 stage manifold tune on my vehicle, would that effect code readers? Please help as I need to pass emissions asap
Car:2007 e92 bmw 328xi Last edited by Archangelxl; 11-05-2024 at 04:30 PM.. |
 |
| Bookmarks |
|
|
