E90Post
 


 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > All-Wheel-Drive (Xi / xDrive) Talk > Rear Wheel Bearing, Rear Differential, or Driveshaft Bearing Noise?



Reply
 
Thread Tools Search this Thread
      02-05-2024, 01:11 AM   #1
italstallion
Registered
United_States
0
Rep
3
Posts

Drives: E90 335i XDRIVE
Join Date: Feb 2024
Location: Massachusetts

iTrader: (0)

Rear Wheel Bearing, Rear Differential, or Driveshaft Bearing Noise?

Hi e90 post,

I have a 2011 E90 335i XDrive 6-speed manual with 125k miles and have been experiencing a humming/“whomp whomp” noise coming from the rear of the car. I have reason to believe that it could be a wheel bearing, rear differential, or a bearing along the driveshaft. The noise doesn’t really change going from one side to the other when turning left or right. The car is completely stock and is on 17 inch runflats. I’ve checked the tires and they seem to be all even with no signs of premature or uneven wear.

The video attached takes place on the highway going about 60mph and then getting off at about 40mph and then to about 25-30mph, with a stop towards the end. Additionally, I start with my phone in my hand located at the center of the car and then move to the rear right footwell, then the left rear footwell, and then back to the center. For the last 50 seconds or so, the phone is sitting on the rear middle seat.

Any potential guesses as to what this could be are greatly appreciated. Thank you.

BMW E90 Rear End Noise Video
Appreciate 0
      02-05-2024, 04:16 PM   #2
whyzee125
Brigadier General
1986
Rep
4,009
Posts

Drives: Dinan stage 2 335i
Join Date: Jul 2014
Location: Chattanooga Tn

iTrader: (0)

Impossible to say for sure without being there in person, but sure sounds ilke a wheel bearing to me. Spin them by hand with the rear off the groun and see if one feels gritty
Appreciate 0
      02-16-2024, 09:47 AM   #3
Seawolf
Registered
6
Rep
4
Posts

Drives: E46 330i, E46 vert, E91xi, E24
Join Date: Jan 2020
Location: Mass

iTrader: (0)

Where in MA are you ?

I have a set of wireless Steelman ChassisEars that will easily diagnose where that noise is coming from.

If you are in Western MA you can drop by and set this up to locate the problem.
Appreciate 0
      02-17-2024, 10:30 AM   #4
italstallion
Registered
United_States
0
Rep
3
Posts

Drives: E90 335i XDRIVE
Join Date: Feb 2024
Location: Massachusetts

iTrader: (0)

I’m 20 minutes north of Boston so unfortunately not in Western Mass. Thank you for the offer though.
Appreciate 0
      02-28-2024, 09:27 PM   #5
italstallion
Registered
United_States
0
Rep
3
Posts

Drives: E90 335i XDRIVE
Join Date: Feb 2024
Location: Massachusetts

iTrader: (0)

Hi all,

So after lifting the car up and doing the 12-6 and 9-3 test, both sides are both solid. I spun both wheels and hear just normal brake disc and pad connection, but nothing crazy out of the ordinary. I do however hear another noise when I turn it that is present on both sides. I wonder if it coming from the differential, since it sounds like it’s coming from that area when I put my ear to the differential while someone else spins the wheel. Am I mistaking this sound for a wheel bearing or a bad differential? Or is it a normal sound altogether? See video to hear what I am talking about.

BMW E90 335i XDRIVE Rear Wheel Sound
Appreciate 0
      08-20-2024, 09:55 AM   #6
Dave92N54
Major
Dave92N54's Avatar
No_Country
534
Rep
1,173
Posts

Drives: 09 E92 335i 6MT
Join Date: Nov 2020
Location: Westminster, Maryland

iTrader: (0)

Garage List
2009 BMW 335i  [10.00]
Did you end up replacing the diff?

I have a similar noise and am picking up a low mile used differential this week.

While driving the car it sounds horrendous, I would have sworn it was a wheel bearing about to break apart.
__________________
09 E92 335i 6MT / Alpine White / Coral Red / VRSF 7.5" / VRSF DCI / VRSF Catless Downpipes / VTT Charge Pipe / Turbosmart RacePort Gen V / RB OEM Billet Turbos / CD919 Custom Tune / Bilstein PSS9s
Appreciate 0
      08-20-2024, 11:25 AM   #7
Runnin'Rich
Second Lieutenant
132
Rep
204
Posts

Drives: 2009MY E91 328Xi 6MT
Join Date: Sep 2020
Location: British Columbia Canada

iTrader: (0)

Both my rear wheel bearings needed replacing.
The right had play in the wheel.
The left was solid
I determined it was the bearing by disconnecting the axle at the diff end, then removed the caliper and brake disc. I could feel roughness when I turned the hub by hand.

I have had a nightmare replacing the second bearing due to how tight the fit of the axle spline to the hub. It’s luck of the draw, the first one slid right in.

I wish I had purchased all of these tools before I started, I needed them all but ordered them as I went along and the car has been on stands for over a month.

Slide hammer
Bearing puller tool
OTC 7394 Universal Hub puller
7 piece drive shaft puller extractor set

Do not be tempted to hammer the axle back in you will damage the metal seal of the boot. Use the 7 piece drive shaft puller extractor instead.
Appreciate 0
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:49 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST