E90Post
 


 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > High Pressure Fuel Rail Modification



Reply
 
Thread Tools Search this Thread
      11-03-2024, 03:37 PM   #1
konstat
Private
konstat's Avatar
38
Rep
97
Posts

Drives: 2008 135i M Sport
Join Date: Oct 2024
Location: Massachusetts

iTrader: (0)

High Pressure Fuel Rail Modification

I saw a YouTube video where someone removed the small cartridge filter and drilled the inlet orifice on the high pressure fuel rail larger. I know this mod is big in the turbo diesel truck world. Has anyone done this that can speak to the results?
Appreciate 0
      11-07-2024, 01:47 PM   #2
iqraceworks
Brigadier General
iqraceworks's Avatar
2091
Rep
3,810
Posts

Drives: 2007 335i
Join Date: Aug 2019
Location: Missouri

iTrader: (0)

Quote:
Originally Posted by konstat View Post
I saw a YouTube video where someone removed the small cartridge filter and drilled the inlet orifice on the high pressure fuel rail larger. I know this mod is big in the turbo diesel truck world. Has anyone done this that can speak to the results?
I've heard about people trying all kinds of stuff to get the HPFP's to flow more fuel. Trying to remove filters, drilling out pots, opening up the fuel rail passages, etc, etc......unfortunately, I've never seen any data proving that all the mods increase the flow at all...not even a little bit. If it actually worked.....you would hear about more people doing it.

And....when they cost $1,200+ to replace....you are probably better off not messing around with them.
__________________
2007 335i, BMS DCI, BMS Chargepipe w/Tial BOV, ARM Catless Downpipes, silicone inlets, Bilstein B12 Prokit Suspension, Whiteline subframe bushings, Front/Rear M3 control arms, G-Plus FMIC, Stage 2 LPFP, Custom E40 tune by Justin (V8Bait), xHP stage 3 transmission flash, RB Two Turbos....10.90 @ 128mph
Appreciate 0
      11-08-2024, 10:59 AM   #3
konstat
Private
konstat's Avatar
38
Rep
97
Posts

Drives: 2008 135i M Sport
Join Date: Oct 2024
Location: Massachusetts

iTrader: (0)

Quote:
Originally Posted by iqraceworks View Post
I've heard about people trying all kinds of stuff to get the HPFP's to flow more fuel. Trying to remove filters, drilling out pots, opening up the fuel rail passages, etc, etc......unfortunately, I've never seen any data proving that all the mods increase the flow at all...not even a little bit. If it actually worked.....you would hear about more people doing it.

And....when they cost $1,200+ to replace....you are probably better off not messing around with them.
Certainly wouldnt be expecting much of an increase. Would only look at this option if I was right at the edge say 1600psi at high rpm and needed a little bump. The one data point from a YouTuber (for what that’s worth) is about a 200-500 psi increase
Appreciate 0
      11-08-2024, 01:55 PM   #4
iqraceworks
Brigadier General
iqraceworks's Avatar
2091
Rep
3,810
Posts

Drives: 2007 335i
Join Date: Aug 2019
Location: Missouri

iTrader: (0)

Quote:
Originally Posted by konstat View Post
Certainly wouldnt be expecting much of an increase. Would only look at this option if I was right at the edge say 1600psi at high rpm and needed a little bump. The one data point from a YouTuber (for what that’s worth) is about a 200-500 psi increase
That's a 10-25% increase in pressure.....I'm pretty skeptical so say that least.
__________________
2007 335i, BMS DCI, BMS Chargepipe w/Tial BOV, ARM Catless Downpipes, silicone inlets, Bilstein B12 Prokit Suspension, Whiteline subframe bushings, Front/Rear M3 control arms, G-Plus FMIC, Stage 2 LPFP, Custom E40 tune by Justin (V8Bait), xHP stage 3 transmission flash, RB Two Turbos....10.90 @ 128mph
Appreciate 0
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 02:43 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST