[PNW_E9One]

Hey guys. I've seen many posts on this topic but I'm not seeing an exact answer so I'm creating a new post since I've tried Almost everything that been suggested on this topic.

I went out to start my car this morning and this happened:

I lifted the rear window as usual to place my belongings for the day and without unlocking the car like usual I pressed on the button to lift the window (not the full hatch) and it open and I heard a weird noise (hard to explain) that i'd never heard before (a chirping noise). That was the last time that it opened with the handle while locked and key in hand. I proceeded to place my hand in the driver door handle so the car would auto unlock (I can't remember what this feature is called) and nothing happened so I reached for my keys and my remote wouldn't unlock the car either.

What I've tested:

All fuses
All actuators in all doors
Rear hatch and window
FM radio gets great reception

I took a look at the Antenna Diversity Module and it seemed to be flawless and no sign of contaminants or water damage.

I also tested voltage on the wires coming into the module from the right.
See photo below for pictures of the module (front, back, and voltage)
I've only picked up 3 different voltages. Should I be picking up 4 since there are 4 wires? I'm trying to narrow down if I need a new module or a wire repair.

Voltages taken 1.9v, 4.8v, and 13.8v (with car running) See photo for location of voltage



Any suggestions or input would be greatly appreciated

Thanks!

[ctuna]

I have to scroll over three screens to read one line of your entry
and somehow I don't think I should have to do that.

I believe there are some tests for the remotes in inpa and ista.

[PNW_E9One]

Originally Posted by ctuna

I have to scroll over three screens to read one line of your entry
and somehow I don't think I should have to do that.

I believe there are some tests for the remotes in inpa and ista.

Hmm that's odd. Looks good on my side.

One thing I forgot to say is that I did put a new battery in both remotes and still didn't help.

Thanks. I will look into that

[PNW_E9One]

Anyone??