03-02-2024, 10:08 AM | #1 |
Lieutenant
221
Rep 477
Posts |
Tyre pressure monitor after (wheel change)
Had my wheel removed for SMART repair to the alloy. Refitted and torqued up. Manual says after a wheel change to reset the tyre pressure monitor. But it’s same wheel and tyre so not sure if I should do this or not?
They deflated for the repair and then overinflated the tyre after they fixed the wheel so just about to let it back down by 4 PSI. |
03-03-2024, 09:39 AM | #2 | |
Major
1258
Rep 1,200
Posts |
Quote:
At different times had both rear tires on my 2023 M2 repaired -- both tires had slow leaks. After did not reset the tire pressure monitoring system. Can't even recall having to fuss with getting the repaired tire pressure right. But I checked the tire pressures to verify they were all good. In your case you probably want to check tire pressures using a good tire pressure gauge after the car has sat overnight to make sure the tire pressures are correct for the temperature. |
|
Appreciate
0
|
03-16-2024, 06:17 AM | #4 |
Major
1258
Rep 1,200
Posts |
Simple yeah, but the few times I've reset the tire pressure monitor system it seems that's when traffic gets bad and it seems to take forever before the system completes the reset.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|