[capturedbysebastian]

Is anyone running 20s,
20x9 et25
20x10 et40

More concerned about clearance to strut tower and being able to try to run as flush as possible.
Any help would be appreciated.

[VegasG42]

Originally Posted by capturedbysebastian

Is anyone running 20s,
20x9 et25
20x10 et40

More concerned about clearance to strut tower and being able to try to run as flush as possible.
Any help would be appreciated.

Bump. Wondering the same

[NoDramaG42]

20 x 9 et25 should essentially run the same as 19x9 et25.
There are multiple examples of the 19x9 e25 on here.

https://g87.bimmerpost.com/forums/sh....php?t=2018939
https://g87.bimmerpost.com/forums/sh....php?t=2065853

Here is a 20x9 et18 (can be accomplished by adding a 7mm spacer to the 20x9 et25 if need be).
https://g87.bimmerpost.com/forums/sh....php?t=1957252

I'd say 20x9.5 e25 is also possible but cutting it close.

The real issue with 20s are the tire profiles. These are what cause ppl to rub on the fenders even with stock suspension.

[VegasG42]

Originally Posted by NoDramaG42

20 x 9 et25 should essentially run the same as 19x9 et25.
There are multiple examples of the 19x9 e25 on here.

https://g87.bimmerpost.com/forums/sh....php?t=2018939
https://g87.bimmerpost.com/forums/sh....php?t=2065853

Here is a 20x9 et18 (can be accomplished by adding a 7mm spacer to the 20x9 et25 if need be).
https://g87.bimmerpost.com/forums/sh....php?t=1957252

I'd say 20x9.5 e25 is also possible but cutting it close.

The real issue with 20s are the tire profiles. These are what cause ppl to rub on the fenders even with stock suspension.

Very helpful , thank you.

https://g87.bimmerpost.com/forums/sh....php?t=1957252

In this instance of the 20" wheels (Front 9J et18 / Rear 10J et25) ,
would these exact offsets be the same for another brand/style of wheel ?

In other words , if I find a set of wheels I like and order them 20/9/et18 and 20/10/et25 , would I get the exact same fitment ? As far as where the face of the wheel lines up with the fender ?

And as far as people with 20s rubbing, do you think if I went with a less aggressive tire width , such as 245f , 265r , it would possibly alleviate this issue ?

[VegasG42]

Looks like the setup that Apex sells and recommends is:

20/9 et25 and 20/10 et38

[capturedbysebastian]

I’m not sure but I am thinking of going with a 255/35/20 front
275/30/20 rear

[VegasG42]

Originally Posted by capturedbysebastian

I’m not sure but I am thinking of going with a 255/35/20 front
275/30/20 rear

Are you xDrive ?

If so, looks like we'll have to run 245 / 275

[capturedbysebastian]

No I’m not xdrive that’s why

[AlexC2er]

Originally Posted by capturedbysebastian

I’m not sure but I am thinking of going with a 255/35/20 front
275/30/20 rear

So hard to find tires and they are quite pricey. Not trying to up in your business but would you consider 19s. 20s look a little out of place imo

[capturedbysebastian]

These are some 20s on the front, they didn’t look that bad.