E9x Coding for track

Synectic · 05-29-2019, 09:14 AM

Hey there, i never actually did any coding for track use and was wondering what need to be done exactly? Most likely going to do it myself this weekend just can't find a thread on exactly what options need to be changed

minaret · 05-29-2019, 01:07 PM

Find thread from paradoxical3 from 1-18-2016 titled Guide to BMW's electronic nannies (coding off e-diff and much more).

Volasko · 05-30-2019, 04:24 PM

Quote:

Originally Posted by minaret

Find thread from paradoxical3 from 1-18-2016 titled Guide to BMW's electronic nannies (coding off e-diff and much more).

Found it!
https://www.e90post.com/forums/showthread.php?t=1216639

mfran615 · 08-06-2022, 05:39 PM

Bringing this one back from the dead. The file links don't work for me. Does anyone know how to code these off? I've been searching for an hour.

edycol · 08-07-2022, 09:39 PM

Quote:

Originally Posted by mfran615

Bringing this one back from the dead. The file links don't work for me. Does anyone know how to code these off? I've been searching for an hour.

If you have ProTool, easy peasy.
INPA is more complicated.

http://dreamingin302ci.blogspot.com/...ve-handle.html

mfran615 · 08-08-2022, 04:11 PM

I don't have x drive. Does RWD have the same DSC nannies as X drive?

edycol · 08-10-2022, 08:19 PM

Quote:

Originally Posted by mfran615

I don't have x drive. Does RWD have the same DSC nannies as X drive?

Go through list on ProTool once you connect it and see what you have.

mfran615 · 08-11-2022, 12:40 AM

Quote:

Originally Posted by edycol

Quote:

Originally Posted by mfran615

I don't have x drive. Does RWD have the same DSC nannies as X drive?

Go through list on ProTool once you connect it and see what you have.

No protool here. Just NCS expert

edycol · 08-11-2022, 09:58 AM

Quote:

Originally Posted by mfran615

Quote:

Originally Posted by edycol

Quote:

Originally Posted by mfran615

I don't have x drive. Does RWD have the same DSC nannies as X drive?

Go through list on ProTool once you connect it and see what you have.

No protool here. Just NCS expert

I can't help you with that. You have INPA right?

feuer · 08-12-2022, 10:26 PM

Quote:

Originally Posted by edycol

I can't help you with that. You have INPA right?

How do you do this is with inpa?

edycol · 08-13-2022, 05:02 AM

Quote:

Originally Posted by feuer

Quote:

Originally Posted by edycol

I can't help you with that. You have INPA right?

How do you do this is with inpa?

I was referring that he might downloaded whole package. I supposed to be more detailed.

mfran615 · 08-15-2022, 10:12 AM

Yes I do have INPA

edycol · 08-15-2022, 01:02 PM

Quote:

Originally Posted by mfran615

Yes I do have INPA

NSC should be part of that download.

Miska · 08-15-2022, 09:36 PM

I never knew there were so many nannies hidden in the car. I always thought the 5 second traction button press disabled most everything, but it looks like alot of these are still active even so.

edycol · 08-16-2022, 10:14 AM

Quote:

Originally Posted by Miska

I never knew there were so many nannies hidden in the car. I always thought the 5 second traction button press disabled most everything, but it looks like alot of these are still active even so.

In another post you indicated you are doing HPDE's?
You need to code out everything but e.diff. DME might lower power especially if you have 330 and not upgraded 328 LCI. Pre LCI are known to be more aggressive in limiting performance due to brake overheat function. Pressing DSC for 5sec won't do anything to override that.

Maxmax73 · 09-19-2022, 02:38 PM

Kind of related to this, or I probably should start a new thread, but is there a knowledge database or any kind of list/guide to traction control values? Because coding out basic options that everyone does, is just barely enough. Because if one goes through the list, there are values assigned to undesteer, oversteer, power reduction etc, and I'm assuming those define how your car is when traction/stability module tries to "help" you while on track.

maryjane · 10-17-2022, 08:59 AM

Id like to know where the power reduction is as well.....when at track and trying to launch from 2nd gear it wont let me go over 2000rpm without cutting power. Any ideas?

05-29-2019, 09:14 AM	#1
Synectic Private 21 Rep 80 Posts Drives: 2010 e92 335i mtech Join Date: Sep 2011 Location: New York iTrader: (0)	E9x Coding for track Hey there, i never actually did any coding for track use and was wondering what need to be done exactly? Most likely going to do it myself this weekend just can't find a thread on exactly what options need to be changed
	Appreciate 0 Tweet Quote

05-29-2019, 01:07 PM	#2
minaret Private First Class 117 Rep 119 Posts Drives: 2008 E91 ZSP Join Date: Apr 2007 Location: Hi Desert, Ca iTrader: (0) Garage List 1994 325is M-Techni ... [9.75] 2008 328i Sport Wagon [10.00]	Find thread from paradoxical3 from 1-18-2016 titled Guide to BMW's electronic nannies (coding off e-diff and much more). __________________ 2008 E91, ARC-8, 255/40/17 NT01, ER sport cooler, TCK camber plates, coil-overs 400# front 700# rear, Koni SA shocks. M3 Subframe bushings, front + rear control arms, tension struts, strut brace. Quaife, Carbotech, Schroth.
	Appreciate 1 Synectic20.50 Quote

08-06-2022, 05:39 PM	#4
mfran615 Private 12 Rep 65 Posts Drives: 2011 335is 6MT Join Date: Dec 2015 Location: OH iTrader: (0)	Bringing this one back from the dead. The file links don't work for me. Does anyone know how to code these off? I've been searching for an hour.
	Appreciate 0 Quote

08-08-2022, 04:11 PM	#6
mfran615 Private 12 Rep 65 Posts Drives: 2011 335is 6MT Join Date: Dec 2015 Location: OH iTrader: (0)	I don't have x drive. Does RWD have the same DSC nannies as X drive?
	Appreciate 0 Quote

08-15-2022, 10:12 AM	#12
mfran615 Private 12 Rep 65 Posts Drives: 2011 335is 6MT Join Date: Dec 2015 Location: OH iTrader: (0)	Yes I do have INPA
	Appreciate 0 Quote

08-15-2022, 09:36 PM	#14
Miska New Member 2 Rep 7 Posts Drives: 2006 300i Sport 6MT Join Date: Aug 2022 Location: Minnesota iTrader: (0)	I never knew there were so many nannies hidden in the car. I always thought the 5 second traction button press disabled most everything, but it looks like alot of these are still active even so.
	Appreciate 0 Quote

09-19-2022, 02:38 PM	#16
Maxmax73 Private 15 Rep 66 Posts Drives: 2011 328i Join Date: May 2018 Location: VA iTrader: (0)	Kind of related to this, or I probably should start a new thread, but is there a knowledge database or any kind of list/guide to traction control values? Because coding out basic options that everyone does, is just barely enough. Because if one goes through the list, there are values assigned to undesteer, oversteer, power reduction etc, and I'm assuming those define how your car is when traction/stability module tries to "help" you while on track.
	Appreciate 0 Quote

10-17-2022, 08:59 AM	#17
maryjane First Lieutenant 104 Rep 320 Posts Drives: 2011 335d Msport 3 Snail. Join Date: Mar 2020 Location: GA iTrader: (0)	Id like to know where the power reduction is as well.....when at track and trying to launch from 2nd gear it wont let me go over 2000rpm without cutting power. Any ideas?
	Appreciate 0 Quote