[JJohner]

Hey i am parting out my salvage car i used for parts for my e92 07 335i.

It is a 2011 n54 e92 m-sport 335is, 57,xxx kms, black interior, and monaco blue in colour.

I have a load of parts i need to get rid of sooner than later; here is a list.

Rear bumper, taillights, exhaust, as well as the front bumper, hood, trunk, headlights, dashboard, interior trim, steering wheel, shifter, wheels, rims, rear view mirror, guages and sunroof are gone
All prices in canadian dollars.

n54 motor - includes pulleys (power steering needs to be replaced, no alternator, no oil filter housing assembley, still has hpfp, fuel injection system, ignition coils, intake box, intake manifold, throttle body, downpipes, turbos & piping, and the starter. Essentially the whole motor, and I'm asking 5500$.

Engine ECU - 300$

manual transmission - 6spd, 57,000 kms, very clean, oil was drained (still a clear bright red when i drained it). 1500$.

passenger front fender - no damage, 250$

Driver door - no damage, shell with window still in, no mirror. 400$

passenger door - one small scratch, " ". 400$

passenger seat - No damage, black leather, heated. 350$

rear seats - no damage, black leather. 350$

radiator fan - no damage, fan only. 120$

sun visors - no damage. 60$ for the pair

washer fluid tank - no damage, no tube, but includes cap. 100$

interior reading lights - Black plastic, no damage. 60$ front, 60$ rear.

light switch control - black, no damage. 100$

rear interior skins/Panels - black leather, no damage, no speakers. 150$ each.

passenger and driver door cards - Black leather, no damage, no speakers. 200$ each.

glove box - black, no damage. 200$

drive shaft - no damage, comes with centre bearing, in great shape. 100$

passender inner fender - no damage, has opening and trim for oil cooler. 75$

wiper motor - Works, no damage. 40$

front headrests - black leather, no damage. 100$ each

rear centre console - black, no damage. 120$

d/s trunk carpet cover - grey, no damage. 40$

Gas cap - 30$

petrol gas tank - 100$

rear package shelf - 100$

shifter foam insert - 50$

seat belt reel covers - 10$

rear upper seat belt (2 in stock) - 60$ each

front seat belt (2 in stock) - 60$ each

amplifier bracket - 10$

steering column bottom trim cover - 30$

rear lower seat belt strap x 2 - 30$ each

entrance covers - 10$ for both

window guides - 25$ each

tunnel heat insulator - 20$

compressor to condensor A/C line - 50$

switch unit steering column - 200$

shark fin & module inside - 100$

mirror glass - auto dim & heat. 220$ for both

oxygen sensors - 75$ each

fuse box junction - 100$

coolant reservoir - 40$

front sub frame - One weld broken, one leg slightly bent upwards, small fix for a frame shop. 200$

emergency brake cables - 80$ for both

steering column - column and linkage to rack. 120$

D/S knuckle/bearing hub - 100$

P/S knuckle/Bearing hub/struct/spring combo - all together. 300$

Oem door sill tread plate (2007 e92) - 80$

oem shift knob and boot (2007 e92) - 60$

i have lots of sensors available as well, i just don't know the names. if you send a pic i can match it up to see what i have available

email me at j.r.johner@gmail.com

[hunginator]

do you have the seat belt arm for the passenger side?

[JJohner]

the seat belt butler ? the push arm that delivers the seat belt ?

[xcyx]

Originally Posted by JJohner

the seat belt butler ? the push arm that delivers the seat belt ?

yes do you have the seatbelt puller and would it fit an 2007 e92 328i coupe? passenger and driver side

[JJohner]

yup i still have them both, but i am not sure about compatibility with the year and model

[dakoo12]

Whats ur gear shifter look like? mine is a little worn out

[Briancanadiano]

Do you have the exhaust system from the is?

[JJohner]

the oem shifter is in good shape, not much wear and tear, no discolouration on the shifter

[JJohner]

Originally Posted by Briancanadiano

Do you have the exhaust system from the is?

nope, its gone just like it said at the beginning of the thread

[hunginator]

Originally Posted by JJohner

yup i still have them both, but i am not sure about compatibility with the year and model

Hmm, I have an e92 2010 and I think the seat belt butler arm hasnt ever changed. Someone can correct me if I'm wrong.

[Dmc]

do you have the oil cooler assembly?
do you have the exhaust assembly with 1st and 2nd catalytic converters?

[JJohner]

Originally Posted by Dmc

do you have the oil cooler assembly?
do you have the exhaust assembly with 1st and 2nd catalytic converters?

i only have the downpipes

[FrenchCanadianDude]

Hi,


Do you have this back trim in stock? mine is scratch

[deeezy]

Do you still have the front reading light unit???

[h.ma]

do you have the tail lights?

[jokers_greg]

Might be looking at taking the engine/ecu/tranny, just gotta see from my mechanic if he'd be able to perform the swap. Do you also have the diff?

[JJohner]

Originally Posted by jokers_greg

Might be looking at taking the engine/ecu/tranny, just gotta see from my mechanic if he'd be able to perform the swap. Do you also have the diff?

yea i still have the diff, but i might have it sold right away

[JJohner]

Originally Posted by h.ma

do you have the tail lights?

read the thread

[FrenchCanadianDude]

I did not received any anwser... Do you have the back trim??

[335i8-50]

Do you by any chance happen to have a logic 7 amp available ? I didn't see anything mentioning it in the thread. Thanks !

[KamBMW335i]

I would like the little retainer on the bottom of the seatbelt rail. It looks like a cylinder around the metal bracket.

This piece>

View post on imgur.com

[JJohner]

Originally Posted by FrenchCanadianDude

I did not received any anwser... Do you have the back trim??

no all the trim is gone already.