|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Headlight washer cover springs?
|
|
09-18-2014, 01:06 PM | #1 |
Private First Class
10
Rep 146
Posts |
Headlight washer cover springs?
I seem to of lost one of the springs which attaches to the headlight washer cover after my bumper was resprayed. Each cover has two usually.
Any idea where I could get one? and what they are referred too as? Cheers James |
09-18-2014, 02:33 PM | #2 |
Private First Class
54
Rep 168
Posts |
I was looking into getting one two as mine was a bit stretched and not sitting right. From what I found you need to buy the covers which comes with the springs. I think you can get them direct from bmw (unpainted). Have a look on eBay and you should find them.
Hope it helps, and if anyone knows where to get the springs on their own if also be interested. |
Appreciate
0
|
09-19-2014, 03:13 AM | #4 |
Private
7
Rep 67
Posts |
Mine doesn't drop back into place after being used on the drivers side (no idea how to fix currently) so I coded them out too, so I didn't have to worry about it. However was told at my service a couple of weeks back that I will have to un-code them for my MOT in November. If you have them fitted to your car, then you have to have them working for the MOT - not sure why??!!??
|
Appreciate
0
|
09-19-2014, 03:19 AM | #5 |
First Lieutenant
16
Rep 346
Posts |
A mix of mine not returning properly and covering my car in water, i pulled the fuse.
Alot easier to throw back in prior to MOT. @A4S they are a requirement to having Xenons. If they are fitted, they must be fully operational. |
Appreciate
0
|
Bookmarks |
|
|