[Offset Motorwerks]

We've added new cosmetic parts to our website!!!!

Custom lower diffusers for your e9x 335i/328.

They're made out of aluminum. (090 thickness)

We offer them in:

-raw (silver)
-textured matte black (extra $10)
-powder-coating is available as well (extra $55)

The center diffusers are a little over eight inches deep not to interfere with oem mufflers and have multiple depth mounting points so they can be pulled back based on visual preference, it also helps with those who have after market mufflers that sit closer to the bumper than the oem.

Two fin styles available (sharp and rounded) they are approx 3.3 inches tall.

There are also different options available depending on which car you have as well as which look you prefer.

Please read carefully.....

OPTION 1


Center only $199 total uses three oem mounting points (335i)



OPTION 2

Center with an additional fin on the outside of each exhaust tip (7 fins total) $249 total each fin is held up by one oem mounting point.



OPTION 3

Center with an additional fin on the outside of the tip, with another fin or spat (flat fin) on the corners of the bumper $299 total the corner fins use oem mounting locations as well.

WITH FIN


WITH SPAT (FLAT FIN)



OPTION 4

Center with outside fins only without fins right next to the exhaust tip. $249





Diffusers for the e90 328i due to having exhaust tips on one side there are less options.

OPTION 1

Center diffuser only $199, uses 4 oem mounting locations.



OPTION 2

Center diffuser with side fins/spats $249 total these also use oem mounting locations.


WITH FIN



WITH SPAT (FLAT FIN)




The e92 328i center diffuser is being tested and will be available soon. only items available are corner fins/spats. $50





We also offer aluminum side-skirt splitters as well $165
(these do not use oem mounting locations) installation requires drilling into the side skirt with self tapping screws, or using a bolt/nut combo. Aluminum won't warp like abs plastic.



We offer them in:

- raw (silver) for those who want to wrap them in vinyl.
- textured black (no extra charge)

PLEASE DON'T SKIP THIS NEXT PART......READ IT.

We know because of the different options it can get confusing. We just wanted to make sure we put enough information with pictures so it was easy to understand as well as you could see what you would be getting when ordering. If you have an oem bmw performance diffuser considered the IS please specify because our diffuser is made differently for that particular part. ALSO considering our diffuser is around 8 inches deep if you changed your exhaust and it sits lower and closer to the rear bumper than oem you may need to use the last hole drilled into the diffuser for it to stick out past the bumper and/or trim the diffuser fins on the back side using tin snips. Other than that installing the diffuser takes less than 10 minutes and all you need is a size 8 hex socket head and a wrench.

If you have any other questions feel free to contact Sean@offsetmotorwerks.com

[Offset Motorwerks]

PM's Replied